I have a problem using the Obiee 11g 11.1.1.6.0

I have installed the Oracle BI EE suite 11.1.1.6.0. in Win Xp (32bit). And I couldn't view the 'analytic' from the browser an error " Error 404: not found" and sometimes "500 : Internal server error". And I tried to restart the BI services, checked through the console and em as well. I want to whether (11.1.1.6.0) is compatible to run in the xp are is there any prerequisites to be taken care of (or) do I have to rectify any of the installation errors if any. Thank you, Kindly leave your suggestions/comments.

938825 wrote:
Hi Dhar,
Actually when I try to access the Analytics, Console, Enterprise Manager ( an error occurred saying browser could not connect to the port ).
And when I start the BI services, there only one cmd prompt pop up other than Start BI window.
Then I checked the opmnctl cmd to the path of instances/bin/opmnctl.bat.
The status showed all the BI components are alive.
I am having these prbem and cudn't login into the interface and work on the Obiee 11g.
Anyways Can you suggest me what to do right now ? I feel like trying 11.1.1.5.0 but not sure whether the problem is the version or not.
Thank you,
Krishna
Edited by: 938825 on Jun 12, 2012 7:52 PM
Edited by: 938825 on Jun 12, 2012 7:52 PMHi,
As specified in my last reply too, here are the answers for your issues
1) Actually when I try to access the Analytics, Console, Enterprise Manager ( an error occurred saying browser could not connect to the port ).
Yes, if you try to access analytics on port 9704, it will error out. This is because from 11.1.1.5 onwards, simple install of OBIEE has only one weblogic server on 7001. So you must try the url http://IP:7001/analytics. If you have been trying this already, just check if there are any connectivity issues to the server or firewall etc
2)And when I start the BI services, there only one cmd prompt pop up other than Start BI window.
Yes, since there is only one weblogic server there will be only one command prompt.
You could try accessing all the analytics on 7001 port and see. I think your .6 is perfectly working fine and you do not need to get back to .5
Hope this clears.
Thank you,
Dhar

Similar Messages

Adhoc reports using the OBIEE 11g

Hi All,
Is anyone has developed the Adhoc reports using the OBIEE 11g.
My question is what is the use of Adhoc reports.and how we develop it.Is there any user manuals.
thanks for your replay.
Regards,
Pradeep

Hi there,
There are also a number of blogs out there which will help you, two really good ones are:
http://www.rittmanmead.com/blog - Rittman Mead also do public training days on OBIEE in the UK/US and India if you are interested.
http://obiee101.blogspot.com
Hope that helps,
Thanks,
Chris

I have just installed Digital Editions 4.3 but am having poblems downloading digital books as I get an error message stating 'Error! Check Activation'. I have Windows 7 and didn't have any problems using the previous version of Digital Editions. Can anyon

I have just installed Digital Editions 4.3 but am having poblems downloading digital books as I get an error message stating 'Error! Check Activation'. I have Windows 7 and didn't have any problems using the previous version of Digital Editions. Can anyone advise?

Hi Siobhan ,
Please refer to the following link and see if that helps.
https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
I would also like to know ,does that error message has any specific number ?
Regards
Sukrit Dhingra

How come I cannot use the Editing tools when i am using Adobe Acrobat Reader DC It wants me to Buy Now. But when I use Adobe Acrobat Pro DC i have no problem using the Editing tool yet I had Adoboe Acrobat XI Pro then it was upgraded to this DC stuff

I am already paying a subscription for Adobe Acrobat XI Pro Now it want me to buy when using the edit tool or even the tool to insert pages Never had that problem before??????????????

Acrobat Reader can't edit PDF files. Use Adobe Acrobat Pro DC.

TS2565 Does anyone else have a problem using the motif xs as a controller in Logic 9.1.8?

When I try to play a song it stutters. This did not happen in 9.1.7. Very annoying. Is there any way to go back to using 9.1.7 after upgrading?

Thanks. I tried this but that doesn't solve it. It turns out if I press play & stop on the Motif simultaneously it will play, but then I have to start from the beginning of the song every time I start from the Motif. I really think this has to do with Logic 9.1.8.

I have a problem using the "save as pdf..." command of the print panel of MS Word (lower L corner). When file has a few photos in it, the pdf file becomes huge; 7 mb Word file becomes 31 mb., on MacBook Pro with Intel Core 2 Duo processor , OS X 10.5.8

How can converting a MS Word file to a pdf make the file 5x bigger? Can someone tell me how to update the "save as pdf..." feature when "printing" a file in MS Word (Word:mac 2008, ver. 12.2.5). The problem is that using this to create pdf files gives huge files when the Word file has graphics pasted as pictures from Powerpoint, even for simple graphics and when first exported at low resolution (180 dpi) as jpg files from Powerpoint and inserted into Word.

Here's a little more info on the save_as_pdf issue. It is Word files in 97–2004 format (doc) that get 5x bigger. The conversion works fine and file size is normal if the Word file is saved in most recent Word format (docx rather than doc). Somehow MS Word can't save its own files properly in pdf format. Thanks Bill for all the frustration.

Problem using the Write to SGL VI and Read from SGL VI

Hello Sir, I have a problem using the Write to SGL VI. When I am trying to write the captured data using DAQ board to a SGL file, I am unable to store the data as desired. There might be some problem with the VI which I am using to write the data to SGL file. I am not able to figure out the minor problem I am facing. I am attaching a zip file which contains five files.
1) Acquire_Current_Binary_Exp.vi -> This is the VI which I used to store my data using Write to SGL file.
2) Retrive_BINARY_Data.vi -> This is the VI which I used to Read from SGL file and plot it
3) Binary_Capture -> This is the captured data using (1) which can be plotted using (2) and what I observed is the plot is different and also the time scare is not as expected.
4) Unexpected_Graph.png is the unexpected graph when I am using Write to SGL and Read from SGL to store and retrieve the data.
5) Expected_Graph.png -> This is the expected data format I supposed to get. I have obtained this plot when I have used write to LVM and read from LVM file to store and retrieve the data.
I tried a lot modifying the sub VI’s but it doesn’t work for me. What I think is I am doing some mistake while I am writing the data to SGL and Reading the data from SGL. Also, I don’t know the reason why my graph is not like (5) rather I am getting something like its in (4). Its totally different. You can also observe the difference between the time scale of (4) and (5).
Have a Good Day
Regards,
Krishna
Attachments:
LABVIEW_Files.zip ‏552 KB

As already discussed a while ago, your binary data does not contain timing information. You need to tell it the scan rate so it can reconstruct the time axis correcty.
From the data, it seems the sample file was recorded at 0.5MHz. Take the inverse and set the time increment. Voila!
Your sample file is two column data with one colum all zero. You need to set the number of columns to two, to only get the good data in channel 1.
Your acquisition program contains unecessary FOR loops, you can remove the inner loops without change in result.
It makes no sense to convert to SGL if you initialize the shift registers with an empty DBL array. You need to initialize with an empty SGL array.
(The code could be simplified quite a bit more, but this should give you some directions).
The attached zip shows some ideas (LabVIEW 7.1).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LabVIEW_FilesMOD.zip ‏195 KB

I have a MacBook and cannot connect to App Store. I have no problem with the internet connection. I want to be able to buy the apps that are available for my computer. The date, time and location are all correct - all the suggestions have failed

I have a MacBook - I am unable to connect to App Store - I have no problems using the internet to connect to anything else. I have checked out all the suggestions - Apple Preference and time, date, location etc. they are all correct. I cannot think what else I should do. Any suggestions please Cynthiafromgrayshott.

If you don't see any messages, not have anti-malware running or the Firewall on, try installing the Mac OS X 10.6.8 Update Combo
It's ok to do this even though you are already running v10.6.8 (according to your profile).
Restart your Mac after the combo in installed, try the App Store.
Also... if you have an app called Little Snitch installed, that can prevent a connection to the App Store.

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa

I'm waiting for my new iPhone 5s to be delivered. I lost my iPhone 5 but did have it backed up on my MacBook Pro. I was using iOS6 at the time. Will I have a problem restoring the data to my new iPhone 5s assuming it will come with iOS7?

I'm waiting for my new iPhone 5s to be delivered. I lost my iPhone 5 but did have it backed up on my MacBook Pro. I was using iOS6 at the time. Will I have a problem restoring the data to my new iPhone 5s assuming it will come with iOS7?

No, you should not. There are problems trying to go the other way, but updating a newer iOS release from a backup of an older iOS release has always been supported and is the basic means of setting up a new device from a previous one.

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Does anyone have problems using the highlights, shadows and sharpness edits in iphoto? Since I uploaded Mountain Lion, those editing tabs do not work!

Does anyone have problems using the highlights, shadows and sharpness controls in iphoto 11? Since I uploaded Mountain Lion on my
mac mini, those editing features no longer work!!!!

Sorry, I booted into 10.8 just to test this, but I only have iPhoto 08.

Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the

Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the magic mouse, Where can I configure this one?
Thank you.

What do you mean by "impossible to use"? I use a magic mouse with PSE all the time. What are you wanting to do that isn't working?

I am using Firefox ver. 3.0.19 and I have Windows 7. When I use Firefox as a browser I cannot print my emails. I get an error message: "pcfax not availabe". If I use IE I have no problem printing the emails.

I am using Firefox ver. 3.0.19 and I have Windows 7 which came with a new computer. When I use Firefox as a browser I cannot print my emails. I get an error message: "pcfax not availabe". If I use IE I have no problem printing the emails.
== This happened ==
Every time Firefox opened
== From day 1 with the new computer about two weeks ago.

It sounds like you have the wrong printer selected.
When you get the Print window, pick another printer from your printer dropdown. You seem to have a fax printer selected instead of a physical printer.

I have a problem using the Obiee 11g 11.1.1.6.0

Similar Messages

Maybe you are looking for