I have a problem when I create message via t-code notif_create.

when I create message via 'notif_create',I can't fill the blank 'Component'.How can I get the 'Component'?

Hi Liu,
the F4 option is available for the component blank and we can select from them generally.ALso check the following SAP Notes...which may prove useful..Note 813075 - DSWP: Create Support Desk message missing category field
Note 857793 - Determine system context for messages
Note 853597 - Sorted display of F4 helps in NOTIF_CREATE
Hope it helps.
Br
Sri
Award points for helpful answers

Similar Messages

  • How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

    Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

    See [[Firefox keeps opening many tabs or windows]]

  • TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

    Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

    search google for "iphone remove picture from contact"

  • Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again.

    Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again, after deautherizing it. HELP ME PLEASE

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

    I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
    PLAESE advise how to solve this problem.

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • TS1967 i have a problem when i try to update or install apps in my ipad, and a message come up says "can not connect to Itunes Store", anyone know why? please advise. however i had update all my detail of payment method.

    i have a problem when i try to update or install apps in my ipad, and a message come up says "can not connect to Itunes Store", anyone know why? please advise. however i had update all my detail of payment method.

    Settings > General > Reset > Reset Network Settings.
    Power cycle the router.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  Help!

    I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  I'm uising photos in my project, not video.  Help!

    You can split a project in two by doing this.
    1) Go to the Project Library View.
    2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
    3) Do this again. This time name it "your project name - part 2"
    4) Open Part 1 for editing. Delete everything in the second half.
    5) Open Part 1 for editing. Delete everything in the first half of the project.
    At the end you should have your original project, plus the same project in two parts.

  • I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

    I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

    Is the Face Time Service avabial in Thailand?

  • I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

    I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

    Is the store that you bought it from close so that you could try going back to them and ask them to activate the card properly ? If not then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • I have a problem when I updated CS6:

    hi,
    I have a problem when I updated CS6:
    Extension Manager 6.0.5 Update
    Installation failed. Error Code: U44M1P7
    Adobe Photoshop 13.0.5
    Done with Errors. Error Code: U44M1P6
    What is it?
    Thx
    Message was edited by: PhotoPlusMore

    www.photoplusmore.com.au       
        m: 0408 96 11 40
        p: (02) 955 22 707
    Begin forwarded message:
    From: Lee_Ann_H <[email protected]>
    Subject: I have a problem when I updated CS6:
    Date: 23 June 2013 2:40:39 PM AEST
    To: PhotPlusMore <[email protected]>
    Reply-To: [email protected]
    Re: I have a problem when I updated CS6:
    created by Lee_Ann_H in Adobe Creative Cloud - View the full discussion
    Hi PhotPlusMore, these links may help.
    Extension Manager: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
    Photoshop: http://blogs.adobe.com/photoshopdotcom/2013/06/photoshop-cs6-13-0-5mac -13-0-1-2win-perpetual-license-updates-now-available.html
    Let us know if you're still having trouble. Thanks!
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5440165#5440165
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5440165#5440165
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5440165#5440165. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

    hello i have a problem when i start woorksheet, my computer crash with blue screen.
    OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
    I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
    The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
    Thanks for your help.

    The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
    -The Help-->Report information - this will tell us more about the computer, video and installed memory
    -Installed hardware - what DAQ devices are you using (exact models!)
    -The worksheet that crashes - we need to see how the timing is configured in the worksheet
    -What other programs are running at the same time?
    -Does the worksheet crash every time?
    -Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
    Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
    Regards,
    -cj
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • I have a problem when running my own EJB as a TUXEDO service using WTC.

    Hello,
    I have a problem when running my own EJB as a TUXEDO service using WTC. I am using TUXEDO 8.1 and WL 9.1.
    When I am trying to run my own EJB as a TUXEDO service error appears.
    TPENOENT(6):0:0:TPED_MINVAL(0):QMNONE(0):0:Could not find service TOUPPER
    at weblogic.wtc.gwt.WTCService.getImport(WTCService.java:4988)
    at weblogic.wtc.gwt.TuxedoConnection.getImport(TuxedoConnection.java:303)
    at weblogic.wtc.gwt.TuxedoConnection.tpcall(TuxedoConnection.java:1302)
    at examples.MyTestSessionBean.Toupper(MyTestSessionBean.java:102)
    at examples.TestSessionBean_knby6k_EOImpl.Toupper(TestSessionBean_knby6k_EOImpl.java:61)
    at net.roseindia.web.servlets.SessionTestServlet.doGet(SessionTestServlet.java:69)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    e8
    10
    java.rmi.RemoteException: EJB Exception: ; nested exception is:
    java.lang.NullPointerException
    at weblogic.ejb.container.internal.EJBRuntimeUtils.throwRemoteException(EJBRuntimeUtils.java:95)
    at weblogic.ejb.container.internal.BaseEJBObject.handleSystemException(BaseEJBObject.java:713)
    at weblogic.ejb.container.internal.BaseEJBObject.handleSystemException(BaseEJBObject.java:681)
    at weblogic.ejb.container.internal.BaseEJBObject.postInvoke1(BaseEJBObject.java:447)
    at weblogic.ejb.container.internal.StatelessEJBObject.postInvoke1(StatelessEJBObject.java:72)
    at weblogic.ejb.container.internal.BaseEJBObject.postInvokeTxRetry(BaseEJBObject.java:374)
    at examples.TestSessionBean_knby6k_EOImpl.Toupper(TestSessionBean_knby6k_EOImpl.java:75)
    at net.roseindia.web.servlets.SessionTestServlet.doGet(SessionTestServlet.java:69)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    Caused by: java.lang.NullPointerException
    at examples.MyTestSessionBean.Toupper(MyTestSessionBean.java:130)
    at examples.TestSessionBean_knby6k_EOImpl.Toupper(TestSessionBean_knby6k_EOImpl.java:61)
    ... 15 more
    Any clue on this.
    With Regards,
    MVS

    If you are trying to create a Tuxedo service in Java using WTC you need to develop an EJB that implements the TuxedoService interface and register its home in JNDI so WTC can look it up. Once that is done you can then export the service to a remote domain in the WTC configuration.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

    I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

    If you have no photos:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
    Regards
    TD

  • I have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

    i have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

    Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
    This one comes close:
    The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
    You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

  • I have a problem when I run the DTP

    hello
    the day before , I load  data in a PSA "MASTER DATA" mode full,
    then in the morning  I load data again this "MASTER DATA."
    I can see  that the same lines do not not present a problem but the lines were changed, i have a problem when I run the DTP?
    I get this messages errors:
    .« the time interval & (from/to) for the data
    ecords 1 & and 2 & overlaps in characteristic 0COSTCENTER &.u201D
    u201CMessages for data records saved; request is red acc. to configurationu201D
    best regard
    francoise dinatale

    As this is a master data load, the attribute change run is mandatory before performing the next load.
    The probable reason for this is in the master data table there is an entry for a characterisitic value and the load resulted in another value. The difference between these two records is the object version. Exisitng record will have A version and the changed record has M version.
    So when we active master data(attribute change run ) then M version overwrites A version and hence on a net we have only one record in master data table.
    Post the above task if we again load master data, as is in your case, then the record will find its place in M version.
    As the activation is not performed(probably), the system finds it difficult, with previously loaded M version and currently loaded M version and hence the reason for the message.
    Naveen.A

Maybe you are looking for

  • Reporting on Virtual Cube - DTP Authorisation is required??

    Hi all, Say there is a Virtual Cube V, i have multiprovider on top of it M, When i am running report on this M, it is saying as there should authorization to run the DTP's. Is it necessary to have DTP authorizations, to run a report on Virtual cube??

  • Problem in creating datasource

    Hi,    I need to create a master datasource for a table but only for some fields in that table. Some of the fields are of type Timestamp but i need only Date. So I thought of creating a structure with only required fields of that table and changed da

  • Objects for deletion included in support package are not deleted

    Hi experts, How can i create a support package using Add-on Assembly Kit that deletes several objects? This is the case: We have DEV, QA and PROD systems. The objects are deleted on DEV and the transports are released. The transports are automaticall

  • Connecting 2 WLS 7 servers via the Messaging Bridge

    Hi,           I am trying to use the messaging bridge to post messages received on a           source JMS queue running in one WLS instance to a destination queue running           on another target WLS instance. I have followed the instructions in t

  • Is there a way to upload a batch file to register all of the students in my class into accounts to use popcorn maker?

    Pawcatuck Middle School uses a lot of technology in our 8th grade classes. We are a Google apps school, so all of our students have G-Mail accounts as their login for everything here at school. These students G-mail accounts only work for email withi