I have a problem with installing AdobeCreatePDFDesktopPrinterSetup.

Hi,
When I tried install AdobeCreatePDFDesktopPrinterSetup I have been experiencing a problem what I can do.
Please have a look at this picture
After that, I applied these steps:::
Windows 7 / Vista
Choose Start > Control Panel > Printers.
Click Add A Printer.
Click Add A local Printer.
Click Use an Existing Port and select "FILE: (Print to FIle)." Click Next.
Select Xerox from the Manufacturer list and select Xerox Phaser 6120 PS from the Printers list. If the Xerox Phaser 6120 PS isn't listed, choose any other printer with "PS" in its name. Click Next.'
Click Next
Click Do not share this printer. Click Next.
Uncheck Set as default printer. Click Finish.
Reinstall the Adobe CreatePDF Desktop Printer.
Login to: https://createpdf.acrobat.com/
Click on Set Up Adobe CreatePDF Desktop Printer
On the new dialog box, click on the Download Installer button.
Save the AdobeCreatePDFDesktopPrinterSetup.exe file to a location you can find again, such as your Desktop.
Run AdobeCreatePDFDesktopPrinterSetup.exe to reinstall the Adobe CreatePDF Desktop Printer.
Verify functionality of the Desktop Printer, if it is working you can go ahead and delete the local printer that was installed previously.
But didn't make difference and the problm is still going on.

I have tried running it as an administrator, however, that makes no difference. On the other hand, did you check that picture which I have posted since I initiated the thread.
If you did that you will notice that installer couldn't access to a port . How can I grant it access to that port?
Incidentally, Would you mind telling me what the benefit of that programme is? I am expected that programme converts any file format into a PDF format

Similar Messages

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

I have a problem with installing anything

when i push the install button, Safari tells that can not open the adresses that start with aam://

Install the Creative Cloud app first.
Mylenium

Anyone have any problem with installing LR v4?

I'm having some difficulty installing LR v4. Went through the steps and downloaded it on my mac. I can see the LR icon on my desktop but each time I double click on it, it keeps bringing me back to the download page again.
Any ideas why and how I can successfully download the program?

What's the full name of the file you're double clicking on, including the extension? And which Mac version are you running?

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Problem with installing Flash Player 10 RC

Hello
I have some problem with installing Flash Player 10 RC. When
I try to do it I have error:
"Error opening file: C:\WINDOWS\system
32\Macromed\Flash\NPSWF32.dll". Why ?
Regards

Does it have any solution ?

Problems with installing Win 2000 on MS6380

Hello,
I have a problem with installing Win 2000 SP 2 on a PC assembled with a MS 6380 (Kt 266 pro) mainboard.
The setup starts but the system blocks just after the boot, when showing the message "Detecting Hardware configuration" .
The configuration is the following:
Athlon TB 800
MS 6380
128 MB DDR
Matrox G200
20 Gb Quantum Fireball CX HDD
Intel Ethernet card 100 pro + S
I tried to update the Bios to the latest version (1.90) and set the most conservative settings on the RAM timings. I have disabled ACPI, too.
Could someone please help me with solving this problem?
Thanks

You have format the BootCamp partition during the Windows installation, since OSX can only do a preformat using FAT32 (MS-DOS) and Windows 7 needs NTFS as file system.
See page 7 of the BootCamp Installation Guidehttp://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
Stefan

Problems with installing new programs

Dear all,
since the update to OS X Yosemite, I have some problems with installing new programs.
I tried to install the Fitbit App to connect my Fitbit to my Mac but the program can't be started after installation. I have the same problem with Blackberry Blend, too. I am able to install it but it doesn't start running.
Does anybody have an idea what's the problem?
Thank You,
Lisa.

Did you receive any errors during the installation itself or does this happen when you try to open Photoshop?

Problems with installing arch-0.7. (solved)

*GOSH* Me is so dumb sometimes... My testing computer, is not PII. It is only pentium. No wonder it aint working. My mistake, sorry.
Hello all !
I have a problem with installing arch-0.7.
When i am booting from CD, it starts to load kernel and so on, but it always restarts.
I have tryed starting it up with arch -noscsi, but it doesnt change anything. It restarts anyway. I get no error messages what so ever, it just restarts.
If there is anyone, who could help me out, give me a hint or something, i would really appreciate it. I am new to linux, and while browsing different distros, i found this one. And, it seems really good, so i decided to try it out, to see if it "does my work".
Thanks in advance.
Disc-Devil

Tnx !
I've found the pre.07-i586.iso... So, now i could try this out.
http://archlinux.veloxis.de/i586/iso/ar … e-i586.iso
If i understood, things right, i can still use sources? Even though, not every app is in the repository, i am able to use sources right?
Anyway, Tnx alot again, for giving me the gr8 tips.

Since installing mountain lion i have a problem with mail. when i delete a message close and open mail the message has come back. please help!

Since installing Mountain Lion i have a problem with Mail. I delete a number of messages from the same person but keep the newest message in my Inbox. I actually delete them from the Trash. The next time i open Mail the deleted messages are back again. Can anybody please help as this is getting annoying. Thanks in Anticipation.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

See Troubleshooting issues with iTunes for Windows updates.
tt2

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

I have a problem with installing AdobeCreatePDFDesktopPrinterSetup.

Similar Messages

Maybe you are looking for