I have a problem with my keyboard in Flash App on Android.

I have a problem with my Flash App on Android, this app requires installing Adobe Air on Android before running. The keyboard pushing issue has troubled me for a while however I can't find a solution.
As you know, while triggering any text box, the keyboard, no matter built-in one or others will push the screen up to a few then you can see what you are typing. However, on my app, when I trigger the built-in keyboard, it covers the half screen meanwhile I can't see what I am typing.
Could anyone can give a light so I can completely this problem for 2 years? Is this something I can do with action script or Flash?
Thank you.

If you have a suggestion or answer feel free to leave a message as I will continue to check back here. Thanks.

Similar Messages

I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

Hey skyshade13,
Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
For further information see the following information:
OS X Lion: iTunes opens to "created by a newer version" alert
http://support.apple.com/kb/TS3918
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M.

Hello, I have a problem with the keyboard of the device, some of the keys do not respond. What can I do? Amit

Hello,
I have a problem with the keyboard of the device, some of the keys do not respond.
What can I do?
Amit

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings (if you can)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have a problem with your purchase from the App Store

I have a problem with your purchase from the App Store
To understand the problem as well as view images on a flow
https://www.icloud.com/photostream/#A7GI9HKK27lHY

You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.

Problem with Virtual Keyboard in Apple Apps?

I am using an iPad 3 and have had Numbers and Pages apps since my iPad 1. I am suddenly having a problem with the virtual keyboard covering/hiding the text box where you type. For example, in Numbers: I double tap to type something in a cell and the keyboard comes up but the text box where it shows what you are typing is behind the keyboard. I haven't seen anyone else mention this problem. I have tried it both in landscape and letter orientation. I have deleted the app from my iPad and reinstalled it but that doesn't change anything. This is also happening in these apps on my iPhone 5. This started happening after the last OS upgrade. Anyone have any ideas? Is anyone else experiencing this problem?

No, I haven't seen that on iOS 6.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

I have a problem with my PC mobile device that the keyboard stop working and the mouse also

I have a problem with my PC mobile device that the keyboard stop working and the mouse also

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

TS1630 Hi I have a problem with my iPhone 4S, I have no sound from my speaker ,keyboard or notifications , and my volume control buttons are not working is anyone experiencing this? Any help would be great full, also I have reset the iPhone many times.

Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
Thanks

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Hi every body. I have some problem with my i pad mini's keyboard . After i opened the message icon , suddenly the shape of my keybord has been chenged . I don't know how to fix it? I was wondering if you'd mind helping me.thanks .

Hi every body. I have some problem with my i pad mini's keyboard . After i opened the message icon , suddenly the shape of my keybord has been chenged . I don't know how to fix it? I was wondering if you'd mind helping me.thanks

That's so you can text with your thumbs. If it does' tog back together automatically put your finger on the tiny typewriter and you should get a pop up to reconnect keyboard. Or more easily put a finger on each one and pop them together.

I have a problem with the screen. my cat pressed a few buttons and everything is displayed in reverse. What shall I do?

I have a problem with the screen. my cat pressed a few buttons and everything is displayed in reverse. What shall I do?

Pick up Garfield and quickly swing him/her over the keyboard once or twice.
Set the cat down.
Try the keyboard.
If no luck, then the catscan failed.
I couldn't resist...............

Problem with wireless keyboard and wireless mouse

All of a sudden, after more than 6 mos., I am having problems with both the wireless keyboard and wireless mouse. I am getting a "connection lost" message on the screen with a picture of the keyboard. It only stays there a few seconds, disappears, then the keyboard is ok again.
The mouse is even more frustrating. I am not using the ball for scrolling, just moving the mouse to move the pointer. It will be working perfectly, then for 15 to 30 seconds will either not respond, or be extremely slow, then be ok again. This has repeated a number of times today, especially when I am in iTunes. The batteries are fine in both devices, since I had the problem, changed the batteries, and still have these problems. Any ideas?

Brian, I called Apple and I think they fixed the problem with the keyboard. Unfortunately, I did not write down the exact keystroke sequence they gave me, but let me tell you what I did. I unplugged the computer and waited 60 seconds. After I plugged in back in, I was told to immediately hold down 4 keys. I think they were something like Ctrl, Command, Shift, and R. Those may not be the exact keys, maybe it was Option instead of Ctrl, and maybe R is not right. I am not sure. Those keys are held down until the second beep is heard after the computer was turned on. Supposedly, this re-established connections between the computer and the keyboard. Sorry I did not write down the key combination. If you can, call Apple and get the proper key stroke combination

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop

I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So, sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop, the result is a black screen appears with no responding to anything from pressing the keyboard to pressing the touchpad. It takes few minutes for the laptop to open again and then a message appears saying that there was a problem with the lock security.
What is happening exactly?

It sounds like your sleep timers are set to too low of a value. Go to System Preferences -> Energy Saver and set both timers to longer times. The computer sleep timer should be a longer time than the display sleep timer.

[K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

Hello everyone!
I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
Can you tell me what's wrong?
Thanks, bartull@
PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

I think that the problem may have been caused by flashing either with liveupdate or with winflash. I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash. My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
If that works, then reflash to the bios you tried before with the same procedure. Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
Good luck.

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

I have a problem with my keyboard in Flash App on Android.

Similar Messages

Maybe you are looking for