I have a problem with my mic i have g62-a13se

What can I do with my mic when I talk to someone I here an echo and avery loud noise ?????

Hi and Welcome to the Community!
If you have BES, then you need to talk to your BES admin for the proper method to activate your BB on BES.
If you do not have BES, then you should not even be going into anything related to Enterprise email...instead, you should see Internet or Personal email setup in addition to Enterprise. If you do not see Internet or Personal, then your device is not properly activated by your mobile service provider for BIS-level Internet/Personal email services...contact them for assistance.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I have problem with my mic when i make call the others cannot hear me but the mic is ok

    i have problem with my mic when i make call the others cannot hear me but the mic is ok i checked it out and it works dont know what to do help me !!

    Hello Sabbir Khan,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Can't hear through the receiver or through speaker, and can't be heard
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Best of luck,
    Mario

  • I have problem with the mic....sometimes others can hear me and other times not at all

    i have problem with the mic....sometimes others can hear me and other times not at all

    can anybody provide me with the solution

  • Im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless i  talk right next to the mic. how can i fix this

    im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound  unless I  talk right next to the mic but it sounds low  . how can i fix this

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Problem with audio/mic combo jack on MS GS70 Stealth Pro

    Hello, i have a problem with the mic/audio plug, when i plug my mic/headphones (Razer Electra / iPhone headset / HTC Headset) in to the plug, i get sound from the headphones, but the mic isn't recognized, i've tried uninstalling the drivers and installing them again, nothing works. Please, help me

    Quote from: Mirri;113498
    Aaand problem still exists. It just turns out that my laptop mic has taken over from the mic port for some reason. Not sure why it won't recognize that anything is plugged in in the mixer despite stating in the little task bar window that an audio device was plugged in whenever I do it.
    Try to use the 4 pin to 3 pin headphone adapter and see if the problem still remains.
    Quote
    Try to use the 4 pin to 3 pin headphone adapter.
    http://www.msi.com/faq/nb-1094.html

  • I HAVE PROBLEM WITH IPHONE MIC

    I HAVE PROBLEM WITH IPHONE MIC

    Hi Modular747,
    I admit that I cannot be sure that we have the same problem.
    But saying that it is not likely to be a design issue (or an issue for a specific batch) because you know 30 people without this issue, is also not really sustaining....
    The specific issue is that the mic is not working when having a phone call, but that it is working with other apps (like voicerecording) also putting the phone on the speaker works.
    Obviously you are a experienced moderator of this forum and you might even have connections within Apple Support. So in spite of reprimand me, it would be nice to get a solution for this issue, which apperently many iPhone4 users suffer reading these posts....
    https://discussions.apple.com/thread/3402377
    https://discussions.apple.com/thread/3405180
    https://discussions.apple.com/message/17815737#17815737
    Thanks in advance for your solution.

  • Recording problems with condenser mics

    ok, i have a CAD GXL 2400 condenser large diaphragm mic and a fast track pro liking into my grageband. I am having major major volume problems, where no matter what combinations i use between the gain of the microphone and the levels of my instruments in grageband, theres always some problem with the volume. usually its that my voice becomes so backround to the instruments that its not driving the melody that it should, and also, with me making the gain higher to try to get more volume, the mic will pick up too much of my voice and it will just sound more like static. if i finally get my voice to be heard how i would want it to be, all my instruments are turned down so low (normally lower than -15) that the song really has no power behind it. what should i do?

    no normally the clip light doesnt come on, ive talked with people from multiple tech supports, such as sweetwater, and their advice was to sing into the mic and get the gain to where the clip was coming on with my voice, then turn the gain just barely below that to get the best sound. it did help, but not enough to fix my problem.

  • Poll: Problems with your Mic

    I'm thinking about purchasing a micro but i've seen that many people have had problems with theirs. I'm taking a poll to see the odds of me getting a good player.
    Please answer if you have or not have had problems with your player, and if so, did you find a way to fix it

    Nothing i couldnt fix. as in no big problems.
    im not sure if this thread will go very far as most people on this forum have problems with their players, which is why they are here. some, like me, just come to help. so i think this is the wrong place to be asking about it, but generally it is considered that its only a small percentage that have problems. and there is a very strong support network if it does go wrong.

  • I have a problem with my mic on my iPhone 4s...

    Today I was at the gym. As I finished I went to make a call but the recepent could not hear me. I then tried using Siri but the same, I tried blowing into the mic and it shows that it picked up the noise. I have left it in a tub of rice for 6 hours but there is still a problem, should I leave it in there for longer or should I just take it to an Apple shop? I dont want to do the later as the nearest shop is 100 miles away.

    The iPhone has one speaker and one microphone along the bottom (All models)

  • Problem with the mic that comes with iphone

    Hi,
    I am having problems talking on the mic that comes with iphone. Does any one have the same problem. The other person somehow is not able to listen to what I am talking. It has become quite common now, i tried plugging it in and out but not change.

    Hey Desi-iphoner,
    Are you using a headset or the iPhone itself? Test without the case if you have a protective case on the iPhone.
    Try the tips in this article: http://docs.info.apple.com/article.html?artnum=306910
    Jason

  • Big problem with USB mic in on headset

    I have a USB logitech 250 headset which I use on both windows (2Kserver & XP) and Mac OSX. The headset works fine on both PCs but I get wierd input readings on the Mac (G5). At first the input is OK and works fine but once you ask it to do something such as make a voice recording in Audion or Garageband or use it in Skype, after about 10-30 seconds it seems to crash. Then it sounds like it samples the first half second of any input after that via the microphone and loops it over and over again until the headset is unplugged. I can't hear it live through the speakers or headphones but I can see it happening on the microphone input levels in system preferences and can record it in any audio software. I've tried it in every usb port and it makes no difference.
    Please help, Ilah

    I have this exact same problem, except I am trying to get the headset (a Logitech Premium USB Headset 350) to work with Teamspeex. I've tried two other headsets as well to no avail.
    The behavior is the same, seems to be working fine using the input levels in the Sound Preferences as a guide, when I startup the audio application, the inputs locks up and seems to only have a split second of audio which it sends over and over again. Such that if I say "Test" it will result in "TesTesTesTesTesTesTes" and the input levels in the Sound Preferences shows the same thing over and over too.
    I plugged this same headset into PowerBook G4 and it works flawlessly with the same software, no problems what-so-ever.
    Would love to hear if you found a solution.

  • Has anyone not had a problem with ZEN MIC

    should I just buy a Nomad Xtra?

    Yes, Have Micro and it is second one in 4 months, Had to send st one back because it froze up and wouldn't turn on or play. The second one is doing the same thing within 3 months with very little use. My new Micro won't go through recovery mode. This is second time it has froze up on me, phone support walked me through recovery mode and I reformatted and reloaded all my music, updated firmwar and now it has done the same thing, WHAT'S UP!!!!!

  • Problem With External Mic

    Hi,
    Im useing Hp Pavilion Dv9000 , recentlly i bought Philips PC Headset SHM1900 for using skype ...when i pluged both the mic and speaker pins in the slot,i can hear music and others but mic not working...i tried all the options in control pannel for sound....should i install any drivers to make the mic work??? please let me know
    Thanks...
    This question was solved.
    View Solution.

    hi , 
    you won't be able to hear your MIC untill you check in this 
    but if you mean by not working that it's not working on skype 
    so i will ask you please to check your setting in Skype 
    then try to make the new MIC as default 
    then try using Windows Recorder 
    if windows recorder can detect sound so there is no reason for fear
    but if the problem remained i will ask you to try another MIC 
    ** Don't forget to check your Sound Drivers 
    >>>>
    Did this reply resolve your post or question?
    If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
    You can also show your appreciation by giving kudos
    Mark Th. Antonio
    Faculty Of Engineering Alexandria University

  • Problems with my mic I guess

    People are having a hard time hearing me whenever I call or they call me. I can hear them just fine, perfectly in fact. I have full service at all times when this is occuring too. I'm not sure if it is a user issue or a technical problem that needs servicing. On a side note, I do have all the volumes turned up (i.e. ringer and speaker volume). Just not sure!! Help!!
    Thanks
    Mike

    interesting... if it's reproducible i'd show the folks at your nearest genius bar... they should replace it no problem if they can't fix it... if you were on speakerphone i'd say that's reasonable... however, in this case... it should be crystal clear.

  • Problems with speaker mic

    When I try to use the mic when searching, text-to-talk or on speaker phone, it doesn't even register. But when recording video, I can record sound. What do I do to fix this?

    Hi, StarrDutches. Welcome to Microsoft Mobile Community! Let's try to resolve it. Does your phone run with the latest software? Were you able to set your phone via speaker mode while you're in a call? Where are you located, btw? It seems that you're trying to use some of the speech commands, right? You may check this link to see if you're current region is included from the list: http://www.windowsphone.com/en-us/how-to/wp8/basics/feature-and-service-availability. You may also update the phone's system apps from the Settings > swipe left, applications > store > check for updates. Keep us posted. 

Maybe you are looking for

  • Low Disk Space on Lenovo_Recovery (Q:) Partition

    Hello all. I have had a Thinkpad T410 for around a month now and I am loving it. Recently I have been getting a warning saying: Low Disk Space You are running out of disk space on Lenovo_Recovery {Q:}. Click here to see if you can free space on this

  • Memory leak in VM

    Hello, I'd like to point out a memory leak in the VM, and it is very annoying for the application I'm working on. Here is the code that shows the problem : import java.awt.Image; import java.awt.Toolkit; import java.io.File; import java.lang.manageme

  • Porblem in displaying the data in main window and footer in sapscript

    Hi Friends, I have created a 2 pages with a main window and 6 footer windows for purchase requistion printout. My requirement is footer windows should only be displayed at the last page. If i bring the footer window at the last page there is blank sp

  • How to add deep structure like LVC_T_SCOL in dynamic internal table

    Hello, can any one help me with adding a deep structure to a dynamically created internal table. the deep structure which needs to be added is for the color purpose for each record i.e.  LVC_T_SCOL . Dynamic table created with below method.     CALL

  • HT4113 what does pairing file missing mean and how do i fix it to restore ipod touch

    need help restoring ipod touch forgot passcode and tried to restore but message about pairing file missing what does that mean and how do i fix it