I have a problem with my wireless router wrt54g. 360 help

So, let me explain my setup. 
wireless router wrt54g has 1 wire connecing a home computer to the internet
Laptop is wireless
I tried connecting my 360 to my laptop (with a wire)  and having a shared internet connection so that i could connect to the internet. 
YET! when i connect my 360 to my laptop, it dissconnects MY LAPTOP from the internet. Weird phenomenon i know.
ALSO
whats nat? When i connect with a ethernet cable, it says this when i try to join a game

this video was able to help me out
 http://www.youtube.com/watch?v=6NIyo2kJEG4

Similar Messages

  • The mail application on my I-Mac dates all mail, whether sent or received, as 5th (of whatever month it is). The computer clock is working, so it's not that. And the time seems to be right. I have no problem with my MacBook. Can anyone help, please?

    The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
    The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?

    OK Vicky, good clues...
    See if this helps...
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544

  • WRE54G wireless extender problem with WRT600N wireless router

    My Vista laptops work fine with the WRT600N router but not with the WRE54G extender. On the other hand my XP laptop works fine with the wireless extender so I know that both router and extender are working. Linksys tech support told me that the WRE54G is not compatible with the WRT600N, which is simply not true. With my XP laptop the signal goes from poor (5-10 Mbps) without the extender to excellent (54 Mbps) with the extender. Also, the lower blue light on the extender blinks indicating data transmission. I can access the setup page of the extender only with the XP laptop and wired desktop computers but not the Vista laptops. I suspect there is a Vista network setting that is the problem. I've turned off the firewall but to no avail. I've also switched between mixed mode and G-only, which made no difference. Anybody have any suggestions?

    pfl wrote:
    I have a secure wireless network (WPA). Perhaps my 4-5 year old XP laptop is the only laptop on the planet that works with the WRE54G-WRT600N combination. But I can assure all the doubters that this laptop categorically works flawlessly when I would otherwise be out of range without an extender. Good luck to spalaw. Please let me know if you are get your WRT160n to work with the WRE54G, especially you're able to connect with a Vista laptop.
    Hi
    I am Afraid and wont be surprised if ya all people are nt able to use a N series Router with a G series Range Expander !
    the Reasons is simple - N series is not BackWard Compatible as u check out the sources around. (Back Ward Compatible means compatible with the previous versions for its wireless Band , e:g - G band and B band.)
    as far as my experience is concerned regarding the Range Expanders , me and my bud wasted a whole Week Configuring a WRT350N and WRE54G v3 , and it worked somehow on the seventh day  for an hour and Lost the connection again! Dayumm !
    and we tried setting up with the same expander with WRT54GS v7.2 , it worked like a charm.
    Conclusion : " WRE54G is a g series 2.4 Ghz expander which will work fine with all g series router though may not work with N Serious routers."
    and if you really wish to Use something which can actually Extend the range for ur N routers signals , Better go for WAP4400N !!!!!!
    And if someone still wish to run around , wanna try some tweaks (which i dont preferr )!
    for WRT600N , just enable 2.4ghz band . as Range expander doesnt support 5 Mhz.
    Use Only standard Channels . e.g : 1,9,3,11 .(No Wide and stuff.)
    Try using WEP encryption first . (cause thats how we made WRT350N worked for a while. sighs)
    At last , Wish u Luck.
    Pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Problems with linksys wireless router please help!

    Me and my 2 flat mates share a wireless network, and for some reasons if cannot connect to it. I have vista home premium and a belkin dongle. We used a Linksys router to begin with, not sure which model, but we recently had to buy a new one because that did not belong to us. I can see the network so the dongle picks up the signal but every time I connect and put in the network key I either get Not close enough to the net work point (the router is about 5 meters away) The network key is incorrect (I created the password and it works on the other two people lap tops) The network has timed out. Sometimes I can connect to the network for a moment then it kicks me off. The connection wizard shows the network at full signal. I’m not sure what the problem is, I have done a full restore on my computer and the dongle was installed onto my computer via the disc it came with. I do have another dongle that is a Linksys one; however it does the same thing. Not sure what the problem is here, can anyone help before I have to go out and buy long network cable and have wires all over my flat i have a heap of work that needs doing this week so any ideas would be really helpfull

    I would first try and bring your computer (if possible) closer to the connection point. That way it will have full time to connect. Also sometimes some materials in the walls mess with connections due to the type of material.  Sometimes if your IP address is not quite right you will connect but then get booted offline. Sometimes if you don’t broadcast your ssid you cannot connect. (one of my Visa Networks does this ssid broadcast must be on).
    Are you using WPA or WEP because Sometimes WEP is not as stable with some wireless modems/ so changing to WPA might solve your problem
    With Knowledge… Impossible means nothing.
    Credentials
    Computer experience: 11 years
    Cisco networks experience: 8 years
    Network administrator: 6 years
    N.E.T. networks experience: 6 years
    Linksys networks experience: 6 years
    Recent additions: A+ | Networks+ | Linux+ | Security+

  • Problems with my Wireless Router since Mac Switch

    Ever since my wife and I bought our MacBooks (we have one each) I have been having issues with my Linksys Wireless G Router.
    http://www.amazon.com/Linksys-WRT54GS-Wireless-G-Broadband-SpeedBooster/dp/B0001 D3K8A
    That is the one I have.
    I use WEP encrypted, DCHP auto allocate on IP addresses and both machines are always within 20 feet of the router. However we get dropped connections to the router very often, almost daily, and it usually happens within a few minutes of booting a machine. The only way to restore the connection is to power down the router and restart it. This always works.
    I've already tried the following. Changed the router channel from 5 to 7, in case there is interference. Changed the WEP password (it's 128-bit hex) and even tried limiting the DCHP allocations to two machines and adding Mac Addressing.
    It could just be a hardware fault, but the previous machines (a PC laptop and an iBook G3) never had this issue. I did a router restart possibly once every 2 or 3 months. Now it's daily. Any advice?

    Believe it or not I got the cheapest wireless router in the shop! A Belkin Wireless G router. It was easy to set up, supports all the standards, has great range and hasn't missed a beat since I installed it and it cost $35. All 3 home machines (2 MacBooks and a Windows desktop) all link via it flawlessly.
    I nearly went for the base station from Apple, but at $200 it was hard to justify.
    Looking around at some forums, the Linksys seems to have issues. I had the version 5. I also updated it to the most recent firmware about 10 days before I had this problem. My MacBook and my Wife's MacBook both disconnected from it the same day. By connecting manually (assigning a manual IP address and giving that address directly to the router) worked until you restarted, but would only work for one machine at a time.
    When I saw the 2 MacBook Pro's in the cafe having EXACTLY the same issue, I was convinced it was the router. It had the same firmware version number mine did (ver 1.01)

  • Im Having a Problem with my wireless router

    Hey all,
         im having a problem my wireless router keeps dropin my net only way i can get back online is unplug the power cord on back of the router then plug it back in i try unplugin my cable modem and plug that back in before i unplug the power cord from my router i try seein if it was a cable modem problem but it wasnt so..its all in the router itself havin a problem.
    Router: WRT54GS
    i got two computers and xbox wired hook up to the router and laptop is wireless.
    im thinkin my router already goin bad and i got it this year too.
    i try goin to the live help on linksys site and they seem to be a computer person that was helpin me then some1 real so..i was hopin u all can help me more on my problem.

    1) Try to keep the router in higher possition.
    2) Try to use the device in the same room or open area.
    3) You may try changing the wireless channel, default channel is 11, try to configure channel 6.
    4) Upgrade the firmware.

  • HT1766 I have some ringtones on my iPhone 5 and I want to get them on my new iPhone 5s. How do I get them? iTunes is trying to make me buy them again. I am using the same account and I didn't have this problems with any of my music. Help anyone ? :)

    Is this a common question asked, or am I the only one have this problem?

    Transfer them to your computer using File>Transfer Purchases in iTunes, then sync them to the new phone. You can not re-download ringtones like you can music.

  • My Atv2 is  very slow movies and shows take forever to load it plays for a few minutes then pauses again. I thought if was a problem with my wireless router but I replaced it with a new airport extreme and the problem persists. Air play is just as slow.

    My Atv2 is very slow with both AirPlay and rented and purchased content I spoke to apple rep and tried the things he suggested but the problem persists. Now it requires more lead time then the lenght of material being viewed. I haves broadband internet connection and airport extreme router so I don't think this should be a problem. Lately every time the unit goes to the screen saver an error message come up saying there was an error while loading content please try again later and you have to all over again. It is extremely frustrating. Any suggestions? What speed of transfer should I expect using AirPlay ?

    I'm having the same issue.  Ay fixes?  Bought ATV today, music streams but videos don't and mirroring doesn't work either.  Start mirror and severe lag then just drops.  Been trying for couple hours. About ready to return it.

  • Problem with my wireless router?

    So, I recently installed the Linksys WRT54G2. It was easy, so I grabbed my iPhone and checked if the Wi-Fi was been detected. Yes, the network name Linksys appeared and it was working already. I didn't want to leave my network open for all my neighbors to have access, so I created a name and a password. After that, it seemed ok still. Again I grabbed my phone and saw the network with the name I created along with the little lock to the side. So it was definitely locked now, I clicked on it to use it and asked me for my password. I entered my password, but it wasn't working, it says "unable to join network" on my phone. I know is the right password and my phone has nothing to do with it, because the network is been detected but I just can't access it as if it was the wrong password. I tries creating new name and passwords and resetting the router but the same thing happens. It seems that it only works if I leave the network unlocked. I don't wanna do that. Cause then everyone is going t

    For your wireless security be sure to use WPA2 Personal  with passphrase.
    On the iPhone forget the wireless connection used previously. Then reconnect and it should ask you for the new passphrase. When entering the passphrase into the iPhone check off show password so you can see if you have any typos in the passphrase 
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • VPN problems with ActionTec wireless router

    I'm trying to set up VPN from my Win7 laptop to my Win7 desktop to use while travelling.  
    I have an ActionTec GT704WGB and cannot VPN from my laptop on the Internet in to my desktop on this router.  Using the Microsoft VPN test tools pptpsrv and pptpclnt I can successfully send VPN test messages (Port 1723 and GRE Protocol 47) between the two machines on my subnet, bypassing the ActionTec, so I know that Windows and Norton Internet Security are not the problem.  But when I put  the laptop on the Internet through another provider I cannot get any messages through the ActionTec.  The ActionTec is configured (Security / VPN) to support VPN with Port 1723 forwarding and GRE * * * ).  I am suspecting perhaps the ActionTec does not support inbound VPN but cannot find anything in the user manual or ActionTec support that clarifies one way or the other.   I'm sure I used to be able to outbound VPN to my former employer's network.  
    It seems there is something about this router, or perhaps there is something in the Verizon network that does not support inbound VPN.  Does anyone know?  

    The actiontech does support incoming and outgoing VPN connections. What changes possibly needed with your VPN setup or different port forwarding needed would need to be advised by the VPN tech support group.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • I have a problem with my win 8 system please help

    hi.
    yesterday I got the msi gt70 I ordered in the mail everything is working good accept one thing.
    whenever I try to install an app (no matter what kind, I tried solitaire and Skype) the app is going up and immediately shuts down nothing happens.
    I tried to look it up on the web and did everything it says but nothing helped.
    please help me I want thing to work properly.
    ty for your attention.

    I have the exact same problem in my GT70-0ND-447 with Windows 8 SL x64.
    Skype, Ebay and some other Metro style applications does not work.
    When I start the application startup screen appears, and then almost immediately closes.
    Applications can be seen in the drop down list on the left, but they do not work. In the system log I see a message "The server not register with App DCOM within the required timeout" (error 10010).
    Event for Ebay under Microsoft-Windows-TWinUI/Operational: "Activation of the app eBayInc.eBay_1618n3s9xq8tw!App for the Windows.Launch contract failed with error: The app didn't start." (error 5961).
    I wrote to support. Waiting...
    Please help!

  • Please help me with my wireless router WRT54G

    Hi, I have a wireless linksys router model WRT54G. what i want to do it´s configure a network in my home. I have 2 pc´s, a laptop an a desktop. what I should do to be able to share files,music,videos. between both computers? the laptop has Windows Vista, the desktop has Windows XP Professional. Please Help me. Thank You really Much.

    Try this link for file and printer sharing. Also make sure you are running latest firmware on router. You can check it from www.linksys.com/download

  • Pls: I have some problems with GOP java card. who can help me?

    hello, all
    I am going to install my cap file into Global Open Platform Card( S1-TiEx-S32J, which uses GP2.0.1) now.
    but, I have failed.
    I use J2SDK1.4.2.10 when I compile the java file.
    And use Java Card 2.2.1 Development Kit when I convert to cap file.
    The sequences of the command / response are below;
    [SEND]00A4040007A0000000030000
    [RECV]611F
    [SEND]00C000001F
    [RECV]6F188408A000000003000000A50D9F6E0A42505042474F317601019F6501FE9000
    [SEND]80500000082021222324252627
    [RECV]611C
    [SEND]00C000001C
    [RECV]0000FFFFFFFFFFFFFFFF0000E1C81BD9C2573DF5AA8EEB95251A95A59000
    [SEND]8482000010A8BD185CD6A3940C83855021A4DFF412
    [RECV]9000
    [SEND]80E60200050000000000
    [RECV]6700
    What was wrong?
    If you are experience with this kind of java card, pls help me.
    with best regards,
    yong lee

    Andalib3,
    There are a couple of options that you have as far as getting this to work. First off go to Control Panel and then to Sounds and Audio Devices (or multimedia depending on the version of windows). In here go to the Audio tab and then under preferred Midi Playback Device you should have a couple of options. There are two settings here that will work:
    ) Microsoft GS Wavetable Synth - This is a very basic midi sound set that is emulated by the OS
    2) Li've! Midi Synth (A or B) - This is the hardware midi synth on the card.
    Make sure one of these is selected as the default midi playback device and then test your games again.
    Jeremy

  • I have a problem with my iPOD, culd anybody please help me?

    I was charging my iPod, when the plug just fell out of the socket, so I guessed it was a little loose, so I plugged it back in to charge it, but the screen just went dark and I can't turn it back on... it's officially broken, could anybody please help me with this and tell me what I should do... thank you so much for your help.

    Have you tried holding the MENU and SELECT (center) buttons until you see the Apple logo to reset it?
    Cheers!
    -Bryan

  • I have a problem with linking media. I need help with the process

    I can't seem to locate the media off my external or dropbox. I have the project file opened it's just offline and won't let me go back to locate it.

    You need to ask in the forum for the program you are using
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Maybe you are looking for