I have a problem with runing a jar file

after i compiled the hole project into a jar file when i want to run it i get this error:
========================================================
C:\Documents and Settings\BlackShark>java -jar D:/eclipse/workspace/Bazooka/E
xe/Bazooka-Server.jar
Exception in thread "main" java.lang.NoClassDefFoundError: ro/blackshark/Bazo
oka/Server/TestServer

Looks like you're missing that class in the jar file. Open your jar file and check if the class is there and the path is correct.

Similar Messages

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Problems with ClassLoader and Jar-Files

1. I'm not good in englisch (writing).
2. I have the problem, that i want to load a object from an application in Jar-File A out of the Jar-File B. I set the CLASSPATH for B with System.setProperty("java.class.path", <ClassPath>); . Then i tried to get the Class-object from a class of B. I do it with getClass().getForName("package.Name");.
But everytime i get a ClassNotFoundException. Where is the Error? Or how can i load a class out of a Jar-File and get an instance? I hope you can help me..
Tobain

The error is that classes are loaded from the classpath as it existed when the program started. Changing the system property that was copied from the classpath has no effect, as you have seen. I have heard that you can write your own ClassLoader if you want to load classes from arbitrary locations, but I do not know how to do that myself.

Problems with creation of JAR file

Hi!
I can't succeed in creating a JAR file for my application.
I've followed the guide at http://java.sun.com/docs/books/tutorial/deployment/jar/basicsindex.html
but apparently im doing something wrong....
I've tried doing an extra Manifest file aswell as "Setting an Entry Point with the JAR Tool" as written in the guide. noen with success however :(
I always get the error "Could not find the main class. Program will exit." from the JVM when I try to run my JAR file.
Structure of my program:
C:\searchpath\moresearchpath\projectname\src\
inside src\ there are 3 packages called; "graphic", "client" and "server".
I want to make a JAR file from the files in the "server" package. The "server" package consists of these following 4 files(and nothing more); "ClientHandler.java", "TestServer.java", "ServerModel.java", "ServerController.java".
"TestServer.java" is my main class!
This is an example of a command I've done in order to try to make a JAR file:
"C:\searchPathToWhereJavaIsInstalled\jdk1.6.0\bin\jar cvfe sgwserver.jar server.TestServer server\*"
This doesn't generate any error. However when I try to start the .jar I get following message "Could not find the main class. Program will exit."
I've also tried creating manifest file manually but without success (with UTF-8 encoding and not double .txt ending on file)
This is how the "Manifest.txt" file has looked when I've tried making one:
Main-Class: server.TestServer
I have used Netbeans 5.5 and Java SE 6 for development
What am I doing wrong? Please help me :(

If I try to run the one generated from Netbeans I get the following error message: "Failed to load Main-Class manifest attribute from C:\searchpath\moresearchPath\projectName\dist\projectName.jar"
The thing is I need 2 JAR files, one that contains the files in the "server" package and one that has all other files. The other one is an applet and the files in "server" package are a standalone application.
How do I get the standalone application's JAR file to work?

Problem with images in .jar file

Hi all!
I've got a severe problem when deploying an application via web start:
the images withhin a deployed .jar file are not found.
So far I've tried a number of things to get the images back, none of which are working.
I've found different threads concerning this topic, e.g.:
http://forum.java.sun.com/thread.jspa?threadID=396363
http://forum.java.sun.com/thread.jspa?threadID=465795&messageID=2141351
but sadly, they didn't help me out.
Here is my code I'm using:
private ImageIcon loadIconFromClassLoader(String tszRelPath)
    ImageIcon tIcon = null;
    cCat.info("tszRelPath = "+ tszRelPath);
    // this line simply leads to a crash of the whole application
    //tszRelPath = tszRelPath.replaceAll("\\", "/");
    if(!tszRelPath.startsWith("/"))
      tszRelPath = "/" + tszRelPath;
    cCat.info("modified tszRelPath = " + tszRelPath);
    URL tURL = ClassLoader.getSystemResource(tszRelPath);
    if(tURL == null)
      // this too crashes my application
      //tURL = PlainResourceProvider.class.getResource(tszRelPath);
    if(tURL != null)
      tIcon = new ImageIcon(tURL);
    return tIcon;
}I've also tried
PlainResourceProvider.class.getClassLoader().getResource()PlainResourceProvider is part of the .jar that involves the images.
Of course all the .class files in the .jar file are easily accesible
I would be so thankful, if just anyone could help me to solve this problem.
I am going crazy.
Thanks in advance, Christoph

You should take care of the directory structure according to the package structure.
I for example have this jar:
C:\source\java\ebank2_util\smsunlock>unzip -l pro-ebank_sms_unlock.jar
Archive: pro-ebank_sms_unlock.jar
Length    Date    Time    Name
      0 10-28-05 17:27   hu/
      0 10-28-05 17:27   hu/khb/
      0 10-28-05 18:17   hu/khb/smsunlock/
    256 11-07-05 16:33   hu/khb/smsunlock/DButils$MySQLException.class
   4229 11-07-05 16:33   hu/khb/smsunlock/DButils.class
   1700 11-07-05 16:33   hu/khb/smsunlock/GUI$1.class
   2318 11-07-05 16:33   hu/khb/smsunlock/GUI$2.class
    988 11-07-05 16:33   hu/khb/smsunlock/GUI$3.class
   1402 11-07-05 16:33   hu/khb/smsunlock/GUI$mywl.class
   5630 11-07-05 16:33   hu/khb/smsunlock/GUI.class
    818 11-07-05 16:33   hu/khb/smsunlock/LimitedLength_TextField.class
   2452 11-07-05 16:33   hu/khb/smsunlock/Main.class
    900 11-07-05 16:33   hu/khb/smsunlock/MyInputStream.class
      0 11-07-05 16:33   META-INF/
     98 10-27-05 15:53   META-INF/manifest.mf
     90 11-07-05 16:33   hu/khb/smsunlock/properties
20881                    16 filesAnd the resource is loaded like this from hu.khb.smsu.Main:
InputStream is = new MyInputStream( Main.class.getResourceAsStream( "properties" ) );

Problem with addition of jar file to DC

Hi WDers,
I have a DC of type WD.
I'm trying to add com.sap.security.api.jar file to this component so that I can get IUser and work on it.
I have added this security jar file as an External jar file to the DC. But whenever I try to DC->Build, the jar entry is going away. So the Build is failing.
Can you kindly let me know why this is happening?
Or is there any other way to add a jar file so that I can use the IUser interface in my view?
Thanks in Advance
RK

Hello,
Add the Standard DC "com.sap.security.api.sda" from the SAP-JEE. This ahould solve the problem.
To do that follow the steps:
1. Go to the "DC Metadata" option available under the DC.
2. Go to "Used DCs" and choose "Add used DCs" from the context menu which appears on a right click at the Used Dcs option.
3.Select "com.sap.security.api.sda" under SAP-JEE and choose finish.
4. Build the DC to gain access to the IUser and other related classes.
Bala.

Problem with using external jar file

Hi
I was using mail.jar library for swing application to send and receive emails. It just works perfect when I run with netbeans. But when I run the executable jar file at dist folder it runs but mail related functions doesn't work.What should I do now to make it work with mail features outside netbeans.
thanks
vinay
Edited by: 899657 on Dec 24, 2011 5:07 AM

899657 wrote:
No. Because I am running the jar file which is created by netbeansNetbeans creates a 'dist' directory in which it puts your jar and a "dist/lib' directory in which it puts the dependent jars that are added to the project using 'project right mouse click'->Properties->Libraries. I would expect to see this 'dist/lib' directory contain mail.jar and activation.jar and any other jars that your jar needs. Within your program jar's manifest I would expect to see the Class-Path attribute have relative reference these jars ( lib/mail.jar lib/activation.jar ) and for the Main-Class attribute define your main class.
Given this setup then you should be able to just type -
java -jar yourjar.jarto run your program.

Problem with installer of jar file....!!!

Hi All,
I had created a installer of my java application. after the installation when i click on jar file,jar file will execute but not locating to installed program files folder.
But if i set the Startin property of shortcut (Start-->Programs-->Folder-->JarFile--> Right Click-->properties) then it run OK.
Problem is that, i have to set that property manually..
If you people having any solution of this, then please let me know.
Thankx in advance...

Hi
see http://forum.java.sun.com/thread.jspa?forumID=256&threadID=501000
Hope that help,
Jack

I have a problem with session manager session files because of the invalid json storage data submited by firefox

Hi, i have problem with session manager's session files. The problem is: the submitted storage data from firefox which is put between "storage":{ and its matching closing brace } But in some of my session files there is non equal { and } under storage's braces. I need to get storage data but in my case it is very hard to do. My question is there any char put before or after { and } like /{ or \{ to avoid confusion? If there is not such thing, i think there could be different solution but i am not sure: i look couple of my session files; after "storage":{...} there is ,_"formDataSaved" so i can get storage data in this example ... by looking between "storage":{ and ,"_formDataSaved" easily. Is there every time ,"_formDataSaved" after "storage":{ ? Thank you.

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Trying to export video, stuck at 0%. File in project is .mp4. I only have this problem with this type of file.

Hello,
I am trying to export a video and I'm stuck at 0%. The file in the video is a .mp4 that I downloaded from my own Youtube page. I have the same problem with any project containing this type of file. I have tried to export as .mov, .Mpeg, .wmv, .avi, with the same results.
I am able to export videos that contain other sorts of files without difficulty.
I am using a PC. Adobe Premiere Elements 12.
Any assistance will be greatly appreciated.
Thank you!
Travis

Travis
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 12?
Sides mentions....
Have you updated from 12 to the 12.1 Update? If not, please do so using an opened project's Help Menu/Update.
What is the computer operating system in use.
Are you running the program from a User Account with Administrative Privileges?
We will be watching for your results.
Thank you.
ATR

Problems with jdbc and .jar files.

I am having a problem with connecting to my database when running my .jar file as an executable.
It connects correctly when I use the java command in command prompt and it also runs correctly when using my IDE.
Is there something that needs to be added to the manifest or in the code it self inorder for the program to find the JDBC driver correctly?

This is the error message that I get:
java.lang.ClassNotFoundException: net.sourceforge.jtds.jdbc.Driver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at AboutFrame2$Connect.getConnection(AboutFrame2.java:109)
at AboutFrame2$Connect.displayDbProperties(AboutFrame2.java:127)
at AboutFrame2.<init>(AboutFrame2.java:72)
at MainStartFile2.main(MainStartFile2.java:7)
Error Trace in getConnection() : net.sourceforge.jtds.jdbc.Driver
Error: No active Connection
I think that it is because it cannot find the driver. I am going to add the path to the manifest and see if that works thank you for all the help.

Problems with Manifest building jar file

Hello all,
i try to deploy my application in a jar file. I also have some libs to deploy with my application. My app.jar and my lib.jar are in the same directory. My Manifest looks like:
Manifest-Version: 1.0
Main-Class: parser.Parser
Class-Path: lib.jar
Class-Path: ...Still get the error: NoClassDefFoundError.
Main Class is found but not my lib. Can somebody help?
regards ak

Hi CeciNEstPasUnProgrammeur,
many thanks. I was blind reading the Java tutorial...
Best regards,
ak

Problems with exporting a .jar file

Hi there,
I'm working on a small java game and wanted to export in as a jar file.
The program runs fine in the IDE and it generates the jar without any warnings.
However, when i try to execute the jar, it simple "blinks" the basic frame and exit.
A better description might be, that it looks like the Jframe opens, but then closes again quickly.
I'm using Eclipse as IDE, and follow the Export wizzard.
My project is devided like this:
package : framework.
package: sound.
package: sprite.
folder: sounds.
folder: sprites.
I'm guessing it somehow can't find the images, but as i said, it runs fine in the IDE.
My MANIFEST looks like this:
Manifest-Version: 1.0
Sealed: true
Main-Class: framework.EagleFlight
Hope you can help.

Hi,
Thanks for your answer.
I can export it from Netbeans, but not Eclipse.
However, from Netbeans I get no sound, when executing the jar.
Anyway, I'm happy enough with the exporting, now I just need to get sound, for which i have
made another thread here.

Strange problem with my build JAR

Hiii everybody... I'm having a strange problem with my build (JAR file)... when I work with the Eclipse and I click in the table that returns the clients stored in my PostGre database it works fine, but when I build my application and it generates my JAR file and I open it and click in the same table to return the objects that I have.. it does not appears anymore.. just show when I work with eclipse... and the database is the same for both.
I already checked the database path in my properties file... and the application recognize the database because I can login and there isn't any runtime exception...
In that application I work with Hibernate and Spring... for me it is very strange because the application works fine when I run by eclipse... but does not return the database data when I click on my Jar file to open the application..
Someone can help me with that?
I dont know if the problem is in the Spring, Hibernate, Libraries...
thanks in advance...

So what's the error then? Are there any error messages? Have you checked the console? Or are you just clicking on the jar and you wouldn't even see the errors if there are any?
What do the logs say?
You're not giving a lot to work on here.

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

I have a problem with runing a jar file

Similar Messages

Maybe you are looking for