I have a problem with the indicator for power on the side of my HP DV6-1341el.
I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
Where is the problem?
I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.
Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the ACPI-Compliant Battery Control Method device.
Post your results whether they are negative or positive to keep us posted.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Similar Messages
-
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
-
I have a problem with my PC mobile device that the keyboard stop working and the mouse also
I have a problem with my PC mobile device that the keyboard stop working and the mouse also
All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner? -
Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.
There are dozens of threads in this forum that describe the fix
-
I have a problem With charge iphone 6plus?? , the lightenin cable is ok
I have a problem With charge iphone 6plus?? , the lightenin cable is ok
mahtab2 wrote:
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I have a problem with my MacBook Pro, I pressed the power button and after that the apple noise came and the screen turned blue. What can I do and what happened? pls help & thx btw
You may find this helpful:
http://support.apple.com/kb/PH14061
Ciao. -
since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks
Unable to access disk image backup "/ Volumes / Time Capsule / iMac Admin. Sparsebundle" (error -1).
Then????? -
I HAVE NO PROBLEM WITH FIREFOX. I JUST WANT THE SPACE FOR OTHER SERVICE.
I HAVE NO PROBLEM WITH FIREFOX. I JUST HAVE TOO MANY THINGS ON MY BROWSER AND WANT TO MAKE POSITIVE CHANGES. HOW CAN I UNINSTALL FIREFOX SUCCESSFULLY? THANK YOU.
if you want to make a clean start again, create a new profile!
see [[Managing profiles]]
edit: and afterwards you might want to go into addons-manager > plugins & disable all stuff in there you won't need/use any longer... -
i have an activation problem with my iphone 3gs. i updated the software to io6 using itunes but now the phone will not complete activation because it keeps saydin the activation server is not available and to re try later. ive been trying for 6 hours but it still wont activate. if i try using itunes then it sayd no sim inserted when there is one inserted, what can i do?
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
Hi, i have no problems with my Apple ID and my Password!.. the only thing that make hard when i want to purchase some Applicatoin in App store the Security Question they aske me about my first car & my teacher name? so, i forgot those things!
Go here:
https://expresslane.apple.com/Issues.action
Ask for assistance. -
My Macbook shuts down when I put it to sleep.
I would try each of these in order seeing if the problem is solved after each:
1. Resetting your Mac's PRAM and NVRAM and Intel-based Macs: Resetting the System Management Controller (SMC).
2. Boot into Safe Mode, then reboot normally.
3. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
4. Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Three times I used the 'repair' button but nothing changed.
Could we have that in English please!
Repair rebuilds the index for messages, but as I completely fail to understand your subject so I have nothing to go on other than the repair button does not fix your issue, what ever that is. -
When Trying to download a word file I get this error message: " *.doc could not be opened, becasue the associated helper application does not exist change the association in your prefernces. " Have checked preferences, and IE opens up the file pointing to something wrong with firefox.
I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.
-
I set up a new router and the windows machines connect fine. My MacBook Pro does not. I go through the airport assistant and see the network yet when I enter the router WPA password I get a message back saying that the password is incorrect. And, it isn't! Very frustrating. What can I do as I had the same problem after I tried to reinstall my last router. Again, only on the Mac. Thanks!
If you kept the same Base Station name and network name, that can confuse Keychain Access. Either change the Base Station and network name, or open Keychain Access Utility and delete any reference to your Base Station and network name. Make sure you delete from the Login and System keychains.
-
Did I inadvertently hit some key that blocked out the preview slide? If so, what do I do to get it back? My presentation is on Thursday so I would appreciate any help you can give me. Thanks.
Did I inadvertently hit some key that blocked out the preview slide? If so, what do I do to get it back? My presentation is on Thursday so I would appreciate any help you can give me. Thanks.
Maybe you are looking for
-
How to use TSP with CME9.1 + SIP Phones + EM
Hi, can anyone explain me how to use the following setup: - Cisco CME 9.1 - IPPhone 8961, 9971, 6921 all connected via SIP - Extension Mobility How can i use the Cisco TSP on my Windows 7 PC to dial via Outlook and so on? Kind regards Andre Lahl
-
Problem with opening pdf in browser
Hello Acrobat X Pro 10.0.0.396 was installed on PC with Adobe Reader 9 (tried with Reader 10). When I open pdf documents from browser IE 8 or FireFox 3.5 i cann't see Tools panel and buttons from quick area (only Comments and Share). plugin in browse
-
Why is the sound browser so slow during playback?
Why is the sound browser so slow during playback? This problem seems to have no solution. This problem even occurs on my Mac Pro With 8 Cores... This problem is in its 3rd Generation since version 8... Even AU Plugins with built-in sound browsers tri
-
Where to find EPMA administrator's guide?
Hi I can't find in the documentation of 11.1.1.3, can anyone tell me where to download it? Thanks
-
Hello, I changed my OS from WIn8 to WIn7 Pro 32Bit. I notice today that under system it says that I have 4G of Ram but only 2G is usable!! Is this due to my change of OS? How do I get all of ram to work. THanks