I have a problem with X-Fi Elite Pro External Cons

Hello there,?I have a problem with my X-Fi Elite Pro External Console, as it seems. I use X-Fi mainly for recording and it was working fine untill I reinstalled Windows. I downloaded the driver off the support page and while audio playing is working fine ; The PC doesn't seem to be recieving any signals when I plugin the guitar through the External Console ... I am not sure what might be causing this problem?and I am in?a desprate need of help. Please advise?Wael

I'm having this exact same problem right now, I came looking for a solution and seemed to have found only people experiencing similiar problems. =[

Similar Messages

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

Problems with X-Fi Elite Pro

Problems with X-Fi Elite Pro? Hello, everyone!
I'm from Brazil and?I'm having a huge problem with my X-Fi Elite Pro.
A few months ago, my video card stopped working and I replaced it!
But then, my audio card stopped working properly as well!
I reinstalled all the drivers (Video AND Audio) and my SB played my music for about 2 minutes before stop working! I reinstall the drivers, works for 2 minutes, and stop! Then I change de mode "Game" to" Audio Creation" and it keep working. But the stop 2 minuts after. Then i change de mode "Audio Creation" to "Entretainment". It works for 2 minutes and stop. If i try the 3. time, works for 2 seconds and stop. It also happens in the 4. attempt... the 5?... the 6?...
In this 2 minutes, it works fine! 00%! But then stops, with?no apparent reason!
Can someone help me? I don't know what to do, anymore!
My PC:
Intel DP35DP Mother Board
GeForce 9800 GT GB
SB X-Fi Elite Pro
4GB Ram
Intel Quad Core 2.3GHz
Windows Vista Ultimate 64bits
(Sorry for the bad english! But... you know, i'm not very good with foreing languages! lol)
Thank you all!
Rodrigo Guidini.

Wow, guess nobody can help me out here......

Problems with X-Fi Elite Pro Creative Audio Creation Conso

Hi I am Sergio Fucchi from Italy and I am 47 years old and I like to create my own CD from my analog li've recording of jazz and classical music.
I have changed all the top quality of Creative cards: Li've!, Audygy2, Audygy2 ZS, Audygy4 Pro and now X-Fi Elite Pro. Now I have a problem to visualize correctly the console of Audio Creation Mode on my monitor at 800x660 because I can't to resize the windows, but I can only pan it around my screen. With the others modes I have not any problems.
My video card is an ATI All-in-wonders 9600pro with latest drivers, my PC is an AMD-XP 3000+ with a GB fo ram and s.o. is XP SP2.
Thank You.
Sergio Fucchi
Macerata
Italy.

Sorry to tell you that the Audio Creation Mode Console is designed to work only at 024*768 resolution or higher.

Does the ATI 5770 graphics card have compatibility problems with early 2008 Mac Pro?

I have had advice from apple technical which contradicts the reviews on the web and on apple site? Apple say that the ATI 5770 is not compatibile while it seems that everyone else thinks it is?
Technical support have pointed me to the follow link
http://support.apple.com/kb/TS3891?locale=en_GB&viewlocale=en_GB
Has anybody experienced this issue?
All help appreciated
(I know that I will have to upgrade OS)

you want the summary of pros and cons?
there is always the official - what we support, tested, marketing - that you can usually take with grain of salt (or two)
there is an official article on support for pre-2010
http://support.apple.com/kb/TS3891
pre-2008 you will see Barefeats and users that PCIe 1.1 does limit the max bandwidth
Google, Bing http://www.barefeats.com/wst10g5.html
http://www.bing.com/search?setmkt=en-US&q=5770+performance
support for 3 displays is always a problem
Apple has taken the reference design with support for 2 x DVI and cut one out, and eliminated HDMI in favor of 2 x minidisplay ports.
http://www.groths.org/?tag=5870
I am not the best on GPU features but that is the ghist.

Hi guys, I have a problem with my new macbook pro 15". I tried to updtate the apps (iPhoto, iMovie and Garageband), but an error was displayed "You have updates available for other accounts". I don't have other accounts!!! :(

Hi guys,
I have a problem, I have a new macbook pro. I updated the software without problems; then I tried to update iPhoto, iMovie and Garageband, but an error was displayed "You have updates available for other accounts". I don't have any other account, i tried everything found on the net but nothing seems to work...Please help me!!!!

Same thing for me it writes "To update this application, sign in to the account you used to purchase it."

HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this. I am running windows 8 on parallels.

Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

It was working untill i did the update

Problems with X-Fi Elite Pro's I/O Breakout R

I'm thinking this might largely be a power supply problem, but it might also be a faulty rack.
The card works and I get sound. I've also plugged in the power supply to the sound card in order to get the I/O box to work. After I install the drivers (I've done this three times now, doing a clean sweep of the drivers each time), the I/O rack works, but when I restart, it freezes and I can't control anything from the rack. The lights are on, but no volume control, no MIDI control, nothing.
I am running a 350W power supply so I'm wondering if there is a recommended wattage to be using when running this card.
General setup inside:
2 HDD
2 DVD-ROMS
2 Gigs memory
Hauppage TV Tuner Card
ATI Radeon 9550
AMD Athlon XP 2800+
Thanks!

The problem is actually about the power connector to the card (which powers the external box).
But of course is not since I forgotten to attach it
It is because the power connector is very tight, so when my friend helping me pulled out the connector, the connector?s plastic jack is also pulled out a half.
I don't notice it when I attach the power connector to it in my new computer, So the power connector can't really provide the power to the external box.
I hope someone can get some help from this thing.

Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2

I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
1. Message appears telling me that the drivers of the display has been restored crash.
2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its is not compatible with the system, and do not work.
What is the solution؟

Hi, MUJAHED
I have a few questions for clarification I would like to ask about your first two issues:
1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Problem with a Toshiba PX1267E 320 external drive

Hello all
I have a problem with a Toshiba px1267e 320 external drive, when all was ok with it I would switch on and the blue led would come on and change blue /violet as it was found on my laptop, a small vibration could be felt if I handled the case indicating that the d/d motor was on.
On that fateful morning I switched on did an explore in my computer and found no ext drive, checked the drive blue led on touched the case could detect no vibration, unclipped the drive from the case put my ear to it heard faint clicking.
I removed device and connected to caddie, this time I could feel the motor going, connected to laptop, new hardware found did my computer explore and found no drive, checked device manager and found it so I uninstalled and reconnected usb with same result.
I am not sure what do next.
I had a word with computer shop if they could recover a while I wait they said at least a 6 hour job if possible (dont want to leave at shop)
Bought me another western digital same model no and also new power supply to try swapping the electronics board just in case therein lies the fault /or possible us power/s but I am clutching at straws here.
Any of you guys here got anything like this happen ? any suggestions?
I am curious to know what they would try in the shop to recover although he said he couldn't guarantee results.
I would welcome any helpful suggestions (not throw it in the bin)

>I removed device and connected to caddie, this time I could feel the motor going, connected to laptop, new
> hardware found did my computer explore and found no drive, checked device manager and found it so I
>uninstalled and reconnected usb with same result.
>I am not sure what do next.
I think the external HDD is dead
Maybe its a head crash this would explain the faint clicking and other noises
Unfortunately, I such case you can do nothing

I have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

i have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

I do not recommend reformatting your harddrive and reloading your software. This is a Windows thing. On an older mac it may be difficult to find all your software again.
Best to have greater than 2gig of free space. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(3)
Buy an external firewire harddrive.
For a PPC computer, I recommend a firewire drive.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(4)
Buy a flash card.

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

I have a problem with JDBC Realm in Tomcat/Oracle/Win XP

I have a problem with JDBC Realm in Tomcat.
I have attached my server.xml file located in the
C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\server.xml
The Problem is that when I login I get the user name and password prompt but it does not resolve.
When I enter in the tomcat-users.xml password with memory realm uncommented it works fine.
C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\tomcat-users.xml
Is there a cache or something I need to reset for the JDBC Realm to work?
I have attached my tables and contents as well...
Did I miss something????
Thanks
Phil
server.xml
<Server port="8005" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
</GlobalNamingResources>

<Service name="Catalina">

<Connector
port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />

<Engine name="Catalina" defaultHost="localhost">

<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@localhost:1521:orcl"
connectionName="testName" connectionPassword="testPass"
userTable="users"
userNameCol="user_name"
userCredCol="user_pass"
userRoleTable="user_roles"
roleNameCol="role_name" />

<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
</Host>
</Engine>
</Service>
</Server>
Tables
create table users
user_name varchar(15) not null primary key,
user_pass varchar(15) not null
create table roles
role_name varchar(15) not null primary key
create table user_roles
user_name varchar(15) not null,
role_name varchar(15) not null,
primary key( user_name, role_name )
select * from users;
----------------------+
| user_name | user_pass |
----------------------+
| tomcat | tomcat |
| user1 | tomcat |
| user2 | tomcat |
| user3 | tomcat |
----------------------+
select * from roles;
| role_name |
| tomcat |
| role1 |
select * from user_roles;
-----------------------+
| role_name | user_name |
-----------------------+
| tomcat | user1 |
| role1 | user2 |
| tomcat | tomcat |
| role1 | tomcat |
-----------------------+

Jan 2, 2008 11:49:35 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Jan 2, 2008 11:49:35 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 734 ms
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
Jan 2, 2008 11:49:35 AM org.apache.catalina.realm.JDBCRealm start
SEVERE: Exception opening database connection
java.sql.SQLException: oracle.jdbc.driver.OracleDriver
     at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:684)
     at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:758)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1004)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Jan 2, 2008 11:49:36 AM org.apache.catalina.core.StandardContext resourcesStart

I have a problem with X-Fi Elite Pro External Cons

Similar Messages

Maybe you are looking for