I have a prolbem with some vinculaited images

I have vinculaited an image in often pages as a return buton, in the Design mode the instruction is correct, but when you runs the aplication or upload the site is not taking you where you want...
Any Help?
that is the only thing that i need to finish my site...
www.consejerocomercial.com.mx where it can be consult our publications, by clicking on the desired publication will enter it and click on the desired ad and then you enter a microsite where you can find selected advertiser extended information. the buton regresar should bring you back to the publication page that you selct
The problem is when you press the button "Regrsar" it does not take you to the right place even when the instruction is correct, when you are in Ens Zafiro and in Ens Rubí.
How to get in thoswe pages.: pulbicaciones > Consejero Comercial Ens, > Zafiro or Rubí Buton > desired ad.

Ok I had Run 3 Antivirus programs thinking that the failure was a bug, after that the situation is the same with my project...
Something is not working well with the program, because is not saving the changes when i try to save them on the project.
Should i try to reinstall the program?...
i really need help from Adobe team....
www.consejerocomercial.com.mx

Similar Messages

I have an issue with some PDF documents some MS Office documents, notably MS Word when received in eMail as attachments not displaying on iPhones, iPad 2s

Hi,
I have an issue with some PDF documents & some MS Office documents, notably MS Word when received in eMail as attachments not displaying properly on iPhones, iPad 2s & new iPads?
PDF docs - areas of the doc only show as grey splotches regardles of viewer
MS Word Docs -
inserted graphics don't display at all,
tables & lists especially with borders are broken &
tables & lists missing the borders &
tables & lists missing the 1st 1-2 lines of the lists/tables.
This is replicated on iPhone 4s, iPhone 4Ss, iPad 2s, iPad new (x2)
It certainly happens in iOS 5.1.1 & iOS 5.1
We believe it all worked aok in iOS 5.0.1(?) & prior
There is no problems reading/seeing these PDF & Word docs on anything other than iDevices.
This is rather critical for us & if not quickly fixed/rectified will prevent us from further purchases of these devices
Rolling back to iOS 5.0.1 or prior I believe isn't possible because of the BaseBand update(?) & isn't much of an option because of the quite noticeable Battery/Charging/WiFi improvements in 5.1 & 5.1.1

Hi,
I logged a call with AppleCare & have since had explained why this occurs (some time ago)
I'll try to explain what was indicated to me.
iOS has a limited Font Set & this affects what PDFs can display. You need to use iOS supported fonts in your PDFs to see/read them properly
These supported fonts are indicated here => http://support.apple.com/kb/HT4980
Regards MS office docs, iOS doesn't have much of an API to work with MS Office documents at all so is stuck with 3rd Party Apps to try to do it.
Unfortunately Mail in/on iOS uses the API to attempt to open/use MS Office attachments unless you tell it to use an App to open the attachment.
I have had success opening & reading MS office docs now with CloudOn, but find it slow & very awkward to use.
Not too sure if this helps others, but at least it explains why this is occurring

My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

Anything?

TS1702 I have a problem with some of my apps what can I do.

I have a problem with some of my apps

Again, we need full details. What do you mean by "do nothing"? Do you mean the app won't launch at all when you tap on it? Or does it try to launch and then crash? Or what, exactly? And is this with all your apps or only specific ones?
We can't offer suggestions unless you tell us the exact nature of the problem. It will also help if you tell us what model of iPad you have and the version of iOS it's running.
Regards.

HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

What is the exact name of the application you're trying to launch? Is it in the Applications folder?

I erroneously deleted some background icons, that now have left me with only thumbnail images, what appears when I want to enlarge is a grey circle containing a black exclamation symbol, how can I get back full function and undo my mistake

I have erroneoulsy deleted icons repetious images from the computer which then affected my iphoto images, leaving me in some cases only with the thembnail image. When I try to enlarge or perform any other function all that appears is a black field containing a grey circle with a black exclamation symbol( !)
within it. How to I get back full function of these affected images and undo my goof up. I have tried restore, but my attempts have not proved successful.
Help !!!
silvercoho

What exactly did you do to delete these?
How did you try to "restore" and what did you try to restore?
Probably the only solution is to restore your backup of the iPhoto library from before you did this
LN

Firefox asks what to do with some PNG images instead of just displaying them

Not sure what is going on here, but some PNG images seem to confuse Firefox, while others are fine. While some PNGs just display when clicked on (eg: when wanting to see a full size image from a thumbnail), others make Firefox ask what I want to do with it. When I select "Firefox 3.6.8" it ends with an error:
/tmp/elementary_gtk_theme_by_DanRabbit-1.png could not be opened, because an unknown error occurred.
Try saving to disk first and then opening the file.
... but when I manually made it open with "/usr/bin/firefox" (I'm in Ubuntu) the image opens fine. I was beginning to think this was now universal for PNGs, but I was opening offending ones from the same site, and going elsewhere showed that some PNGs will be displayed as usual. Does anyone have any idea why this would happen to some PNGs but not all? Here is a link to one of the problem PNGs:
http://s.linux-mag.com/i/articles/7811/elementary_gtk_theme_by_DanRabbit.png
It opens without issue in Opera. Hope someone can make sense of this. Cheers

You can look at this extension:
*Open in Browser: https://addons.mozilla.org/firefox/addon/8207

Exchange the SAP logo image in masthead with some othe image.

Hi Experts,
Actually i need to change the image of SAP logo in the masthead of the portal and i have gone through many forums ,blogs but didnt get the exact way of exchanging the logo with my company logo can any one help me please.
Thanks& Regards
Pooja Gehani

Hi Pooja,
If you unable to change branding image thro Themes then try in this way..
steps for importing the existing masthead:
1. Administration -> Support -> Support Desk -> Portal Runtime -> Browse deployment
2. navigate to ROOT/WEB-INF/deployment/temp
3. download com.sap.portal.navigation.masthead.par.bak
4. import to developer studio (File -> import -> par)
5. Open the HeaderiView.jsp file from PORTAL-INFjsp there you can find the code, here give the image name what you want to place
<TD nowrap><img src="<%= componentRequest.getWebResourcePath() +"/images/image.gif" %>" border="0"></td>
6. Finally repack as Par and deploy in portal
Please check the following blogs for more info
Portal Branding - Go beyond portal themes
Re: Pictures in Masthead
plz reward points if helps
cheers
dev

Most efficient way to insert into a story with many floating images?

I have a document with many floating images. They must all be floating because otherwise I do not get the Caption numbering right and it is impossible (because some images take an entire page) to use only anchored images.
Now, I have to insert a large part into the middle / at the beginning of a section. If I do that the text will flow, but the images remain in place. This is extremely slow working because of all teh movements I have to do on all the images. What I would like to do is to let the pages after the page where I am entering remain the same and when I insert text and images this should just move up one page at a time. Then, at the end, I can do the fine tuning of attaching both parts again. Is there a way to do that in an efficient way?
What I now often do is move all the floating images out of the pages, then insert the new stuff, move the images back, then make sure all the references are fine (e.g. if they refer to an image on another page, the style becomes paragraph number + page numer). For some sections this is a hideous amount of work (many, many images).
Is there a smarter way. I have been thinking about splitting and later rejoining a section. If I add pages to one section, the following sections are not damaged, after all.
What is the best way to do this?
Thanks in advance.

I have a document with many floating images. They must all be floating because otherwise I do not get the Caption numbering right and it is impossible (because some images take an entire page) to use only anchored images.
Now, I have to insert a large part into the middle / at the beginning of a section. If I do that the text will flow, but the images remain in place. This is extremely slow working because of all teh movements I have to do on all the images. What I would like to do is to let the pages after the page where I am entering remain the same and when I insert text and images this should just move up one page at a time. Then, at the end, I can do the fine tuning of attaching both parts again. Is there a way to do that in an efficient way?
What I now often do is move all the floating images out of the pages, then insert the new stuff, move the images back, then make sure all the references are fine (e.g. if they refer to an image on another page, the style becomes paragraph number + page numer). For some sections this is a hideous amount of work (many, many images).
Is there a smarter way. I have been thinking about splitting and later rejoining a section. If I add pages to one section, the following sections are not damaged, after all.
What is the best way to do this?
Thanks in advance.

Using local/testing server with cs5 inserting images look fine in the split screen but do not show

Hi
If I open example: header.php and insert any photo jpeg/.html ecs i can see the images in the split screen but not in the browser if i save then refresh. I am able to make any change to the code ecs. and they are reflected just fine. I have tried this with my fireworks images .html and when that did not work i tried a strait jpeg off the desktop. This all did not work. I have deleted the local server then step by step created a new one via devnet instruction. This did not work! everything looks fine i even tried in 3 sep browsers with 0 luck....There is no remote server connected at this time because i am making a child theme for my current site. After all changes are done we will the ftp the word press files to site and change.
Ps i even started over from scratch with 0 positive affects....

After a lot of pain!!!!!!! the issue is fixed lol After 3 weeks I have overlooked the obvious !!! so the simple fix was the path of the image. Yes i feel stupid 10 years in lol....
Apparently dreamweaver cs 5 will not use the full path when inserting images into the page example: If you drag the image out of your assets folder or however you do it, DW will give you a path like this <img src="images/glass.jpg" width="800" height="729"> This is not the full path and when your pist!!! you cant see things like that ;( so the image path should look like this:
<img src="wp-content/themes/adszoom/images/glass.jpg" width="800" height="729">
also in the html files example of bad then good!

<img name="navigation" src="navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>

</body>
NOW THE GOOD!

<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>

</body>
THIS LINE IS YOUR ISSUE
<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
Ok thanks and if there are any issues with dw please ask: [email protected]

System Image Utility - Issues with making bootable images

During the image creation process for a Netboot, the System Image Utility reports an error. I've included the log file (everything before the removal of the bad image below).
------------Begin Log File --------------
2006-06-02 13:19:25 -0400 Initiating user authentication
2006-06-02 13:19:28 -0400 Image creation in progress
2006-06-02 13:19:28 -0400 Starting image creation
newfs_hfs:
2006-06-02 14:10:30 -0400 b=400: bitmap clump size is too small
--------------End Log File--------------------
I have no issue creating images from restore disk sets (that shipped with machines) or retail masters of various OS's. This issue seems to be related to the particular drives I am trying to create images from.
The drives that give me this error are hardwarily OK and the software works great. I can boot from these drives and have no issues with the machines imaged from them after the fact. I just want to Netboot off of these so I don't have to lug a million drives around...
Any clue?

i know that was the case in Leopard and Snow Leopard but i just mounted a leopard image to create a new netrestore on my lion server. i was not able to boot any of my images created on Leopard or SL when running Lion Server. I assume i need to recreate the images on Lion. Right now my Lion server is using a leopard image as the source to create a netrestore i can push on the Lion server.

Problem with some files with Adobe Audition 3.0

Hello everybody, I have a problem with some files. For example, when I open a .mp3 file, it says "The selected file it's not a supported file type". Instead, with other .mp3 files all works fine. What should I do? Thanks for the attention.

I strongly suggest - in fact this is probably the only thing you can do at this point - that you have a look at the FAQ here, and do exactly what it says.

Hierarchy with some other fields behind

Hello I have a problem with some a little SQL
I have this SQL and that works fine:
SELECT Lpad(Unit_id, Length(unit_id) + LEVEL *4,'-') || ' ' || unit || ' ' || unit_level_id || ' ' || unit_rel_to_parent_val_from as Hierarchie
from ua_unit where unit_type_id = 1 and unit_rel_to_parent_val_from <= sysdate
start with unit_parent_id = 'CH'
connect by prior unit_id = unit_parent_id;
Now I have somthing like this
Hierarchie
----A ASR 2
--------A10 ASR FS 3 01.07.2002
------------100 ASR FS Bnk East 4 01.07.2002
------------105 ASR FS Bnk Central 4 01.07.2002
Thats create a hierarchy but I need some other fields beyond this hierarchy...how can I do that?
Greets
Tierrii
Edited by: user10411886 on Mar 16, 2009 2:37 AM
Oh I see the columns are there but miles away from the hierarchy column ( working with SQL Developer 1.2.1) how they can be near to the hierarchy column?
Edited by: user10411886 on Mar 16, 2009 2:54 AM
Now I have what I want. Thanks for all the help and Inputs from you guys!

Thank for the fast reply..
this with the other columns is the right way first, fist I have now this hierarchy and now after this hierarchy
there should be some other columns listed, but when i do this
SELECT Lpad(Unit_id, Length(unit_id) + LEVEL *4,'-') || ' ' || unit || ' ' || unit_level_id as Hierarchie, unit, unit_id
from ua_unit where unit_type_id = 1 and unit_rel_to_parent_val_from <= sysdate
start with unit_parent_id = 'CH'
connect by prior unit_id = unit_parent_id;
That will not work...
I hope you now what I mean :8}
Edited by: user10411886 on Mar 16, 2009 2:27 AM
Oh I see the columns are there but miles away from the hierarchy column ( working with SQL Developer 1.2.1) how they can be near to the hierarchy column?

Interesting phenomenon with some FM

Hey,
i have a problem with some FM which check the existence of a material. When i test the fm in SE37 i get the right result. But when i call the fm in my report i always geht the Error ID back.
For example with this FM: BAPI_MATERIAL_GET_DETAIL. I read the data from an EXCEL file. Afterwards i want to check if a material exist to work further with this material but i can't because i always get in the importing variable return the error id.
i also tried with a hard coded material --> also error id.
Maybe some have an idea?
Regards
Alex
PS: the coding
IF sy-tabix NE 1.
      lv_matnr = ls_upload-matnr.
      CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
        EXPORTING
          material              = lv_matnr
          plant                 = '0010'
*         VALUATIONAREA         =
*         VALUATIONTYPE         =
*         MATERIAL_EVG          =
        IMPORTING
          material_general_data =      ls_material_general_data
          return               =                   ls_check_material
          materialplantdata     =           ls_materialplantdata
          materialvaluationdata =        ls_materialvaluationdata.
*material exists?
      IF ls_check_material-type EQ 'S'.

Yes, check the conversion-exit associated to domain MATNR in your system can be ALPHA or MATN1, then use CONVERSION_EXIT_MATN1_INPUT (or ALPHA) to convert external format (displayed at screen) to internal format (database and parameter of BAPI) SE37
did implicitly execute this conversion during PAI.
Regards,
Raymond

Satellite L870-16C -display problems with some games

Hi,
I've bought this laptop recently and it turned out that i have tearing problems with some games.
But really not with all games, just some of them (ex: the witcher, borderlands, trine...).
So i was wondering what the problem could be?
So far, i've heard it could be a v-sync problem, but everything i've done regarding this didn't change a thing.
Is it just a software issue or could it be a hardware problem with the graphic card?
I'm considering sending back my laptop to Toshiba, so i wanted to know if this was the only solution (and if it was a solution indeed).
For information, it's a L870-16C with a ati radeon HD 7670m graphic card (driver version: 12.10-130101a-151427E-ATI), operating on windows 8 64 bit.
Does anyone have some clues?
thanks
Message was edited by: Bakappoi

What game problems do you have exactly?
Could you be more precise?
You said that you have some problems but NOT with all games.
Therefore I dont think that you have an hardware problem
In most cases (any) games issues are related to graphic card drivers in my long gaming experience, all issues which I had in the past were related to compatibility problems between driver and game.

I have a prolbem with some vinculaited images

Similar Messages

Maybe you are looking for