I have a question about fields and NTSC 24fps.

I shoot in DV (30fps), edit with final cut, export using compressor to DVD studio pro. The end product is a DVD that get's played on a TV in the U.S. I have always used the sequence preset DV NTSC 48kz. Which is 29.97 fps. It works fine and that's the same preset I capture with.
Today while playing around with the presets I noticed a DV NTSC 24. Which is 24 fps and has a field dominance set to none.
Can someone explain this too me?
1. Why would someone use 24fps sequence preset on footage that is captured at 24 fps on the camera?
2. Why would someone set a field dominance to none. What does that give you? I am assuming it deinterlaces the orginal video footage and makes the footage progressive?
Can anyone help me out or point me to a good website that would explain some of this stuff.
Thanks
-Fraky

1. Why would someone use 24fps sequence preset on footage that is captured at 24 fps on the camera?
Because if they shot 24P or 24PA, then they'd want to edit in a 24p timeline. (which runs at 23.98)
2. Why would someone set a field dominance to none. What does that give you? I am assuming it deinterlaces the orginal video footage and makes the footage progressive?
24P...P stands for PROGRESSIVE. No interlacing, therefore no fields...therefore no field dominance.
Can anyone help me out or point me to a good website that would explain some of this stuff.
http://www.kenstone.net/fcphomepage/24p_in_FCPnattress.html
Shane

Similar Messages

I have a question about downloading and itunes on TWO computers.

Where I work I have really fast internet, perfect for downloading movies, etc. At home, in the sticks, I have slow internet. Is there any way to rent/buy media on my work computer itunes (Win) to take home (say on my iPhone) and sync with my Mac iTunes?
Thanks!

Bartybar wrote:
I think I've gone Cross-Eyed....
Hmm, not sure this will help, but let's try...
Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
tt2

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem.

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

HT5262 Hi, I have a question about iCloud. I have an ipod 4th generation and im getting a 5th generation. i have lots of games such as subway surfers and temple run 2. I worked and played really hard on earning stuff and have also made in app purchases. D

Hi, I have a question about iCloud. I have an ipod 4th generation and im getting a 5th generation. i have lots of games such as subway surfers and temple run 2. I worked and played really hard on earning stuff and have also made in app purchases. Does iCloud save that kind of stuff?

See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
However, not all in-app purchases will transfer to another device. For which ones ill not see:
iTunes Store: About In-App Purchases

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

HT201364 Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont k

Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how. It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !
Thank you !!

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Start up in Safe Mode
    http://support.apple.com/kb/PH11212
3. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
4. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
5. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
6. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
If this does not help, you have to buy an external HD and move your movies photos.etc to
the external HD.

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hi ,
You might want to refer the following link to find your serial number and activate your software .
Here is the link for the same.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know how it goes .We'll do the best possible to get your issue fixed.
Regards
Sukrit Dhingra

I have a question about DWG files. Can I open them on my MacBook Pro with OX 10.9.5 system?What app do I need to view and print them?

I have a question about DWG files. What app will allow me to open DWG files to view them on my Macbook Pro?

Perform this Google search: ".dwg files on mac." The results should provide answers for you.

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

I have a question about Configuration of Post with Clearing

I have a question about confiruation of the post with clearing which is t-doce 'FB05'.
When I make post with clearing on 'FB05', I can change the additional selections.
Where can I control the confiruation of the additional selections in t-code 'FB05'
Please, tell me the menu path.

Hi,
In SPRO, go to
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Incoming Payments > Manual Incoming Payments > Make Settings for Processing Open Items > Choose Selection Fields
Hope this helps.
Thanks

I have a question about weblogic RMI , how can I resolve it.Thank you

I have a question about the weblogic RMI .
I have a program.web services+weblogic RMI +Data Sources When I run the program in the console application.it is ok.But When i run it with the web services(it 'is mean Get some parameter and run the different program).it's fail.The Exception is
cannot assign instance of yype weblogic.rmi.RMIServices_1033_WLStub to field demo.RMIServer_1033_WLStub.stubinfo of type weblogic.rmi.internal.StubInfo in instance of demo.RMIEsrver_1033_WLStub
how to resolve .Thank you.

Hi Charles,
Parental Controls has always had problems with https sites, no idea if it's fixed in 10.9.x or not.
When you setup your Mac it shouldv'e made an admin account, are you not running from that account, or did you somehow change it to a Managed account???

I have a question about fields and NTSC 24fps.

Similar Messages

Maybe you are looking for