I have a question about opening InDesign because I have messages I need answers to.

when I try to open InDesign I get a note:Cannot load Adobe InDesign CS3 because it requires Shortcut Editor Dialog. When I try to open Shortcut Editor Dialog it says there is no default application specified to open that document. Which application should I use?

OS X 10.6.8 I'm looking at my preferences now but don't really get it. When I went to install Shortcut Editor Dialog Plugin the message the message says : there is no default application specified to open the document Shortcut Editor. Then in the recommended application box it recommends iTunes or Garage Band. Huh?
HOw do I reset the preferences?

Similar Messages

A question about opening ports

I have a question about opening ports with the airport. I need to open up ports UDP 88 & 3074 and port TCP 3074. I am wondering if I should open these ports for the specific IP address on my network that will be using them or if I should open the ports on the gateway IP (10.0.1.1) not sure which is the right route to take. Any help would be appreciated.
These are for running an xbox over xbox live.

Typically, you will want to open these ports for the device on your local network that needs to be accessed from the Internet. In this case, it would be your Xbox 360.
Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live.
The following web blog does a great job explaining the NAT issues with Xbox Live. Basically what it comes down to is that although you can get an Internet connection for the Xbox 360 with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live game that you want to play. As such, Port mapping may be required to allow Xbox Live access.
The following ports must be available for Xbox Live to operate correctly:
• UDP 88
• UDP 3074
• TCP 3074
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the Xbox 360.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC hardware address of the Xbox>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 88, 3074
o Public TCP Port(s): 3074
o Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
o Private UDP Port(s): 88, 3074
o Private TCP Port(s): 3074
o Click "Continue"

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

Question about openning files using SDK 10.

I have written a Plug-In for SDK 9 that works wonderfully. One of the functions is for the user to be able to page (Next/Previous) between PDF files on our server. This functionality now longer works without crashing Acrobat 10. All I am doing is creating the URL path to the next/previous PDF, creating a CustomFileSys with the path and calling AVDocOpenFromFile.
Does this no longer work with Acrobat 10 SDK?
Thanks!

Should work fine, AFAIK.
For this level of issue, I would open a formal support request with developer support.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 10 Oct 2011 08:51:08 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Question about openning files using SDK 10.
Question about openning files using SDK 10.
created by Greggars<http://forums.adobe.com/people/Greggars> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3963065#3963065

I am on the Adobe Cloud, but for the past few days every time I attempt to open indesign I get the message missing plug-in Actions. RPLN, and the app will not open.

I am on Adobe Cloud but over the past few days every time I try to open indesign I get the message that there is a missing plug-in Actions. RPLN, and the app will not open. Any ideas?

Hi, when I try to open indesign itself this message comes up:
Adobe Indesign cannot load the ACTIONS.RPLN plug-in. The plug-in requires
the 10.1 version of indesign.. Please contact the vendor to get a
compatible version of ACTIONS.RPLN.
I am not able to click off the message to make the box disappear, so have
to crash out.
Paul

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
LN

Cannot open InDesign because of Shortcut Editor Dialog Plug-In

Hi,
I have a Mac with the latest OS and just got InDesign CS3 but when I try to open it, I get a pop-up box that says "Cannot load Adobe InDesign because it requires Shortcut Editor Dialog. Please install the Shortcut Editor Dialog plug-in and restart Adobe InDesign." Unfortunately, when I try to run the plug-in on my computer (under Applications), it comes up as un-openable. Anyone have a solution to this problem or link to the plug-in? Thanks.

Take a look at http://forums.adobe.com/thread/631627?tstart=120
Down near the bottom is a post about duplicate folders...

Question about opening sockets

Hello I have some questions about using sockets.
I made a program which works with sockets.
I have a class which contains this
static byte[] send(byte outbuf[], int len, byte recbyt[], long recip[])
        InetAddress dst = InetAddress.getByName(sendip);
        DatagramPacket request = new DatagramPacket(outbuf, len, dst, sendportint);
        DatagramSocket socket = new DatagramSocket();
socket.send(request);
DatagramPacket packet = new DatagramPacket(inbuf, inbuf.length);
socket.receive(packet);
}In another class I call this method like this
for(int i=0;i<rows;i++)
send(byte outbuf[], int len, byte recbyt[], long recip[])
}As you can see it opens a socket when sending something but never close. Does this mean that evrytime I call send it opens a new socket??
So that if rows is 500 after this loop 500 socket are opened??
When I place close.socket after socket.receive() it works the same. Is this better or not??

What do you mean with this line
Method ends, Socket gets GCed and closes on GCDo you mean when the method ends the socket closes??
And what is GC?

Question about opening ports

Hi All,
I've recently had some problems trying to video chat with a new person. They're on a pc using AIM 5.9. I've been able to chat with a different pc user before as well as some ichat users. I can also successfully connect to the Apple test severs. I've never done any port forwarding/triggering on my router (Netgear wgt624v3). I know that just about every thread here having to do with connection problems talks about opening up a bunch of ports. So my question is should I have to do that if I'm able to connect to the Apple servers, a different pc user and other ichat users without having done anything to my router?
Thanks,
Chris

Hi Chris,
If you can call out to many people and have one that you can not contact there are twoi possibilities.
1) They have not set up their end.
2) You and they are set up but are having problems with the way the other device does NAT.
A bit more on the subject http://www.ralphjohnsuk.dsl.pipex.com/page15.html#CertainBuddy
7:48 PM Sunday; January 14, 2007

My card expired on my payment details for my creative cloud subsciption and i changed it to my new card, it charged me 10.59 and now it wont let me open photoshop because its telling me I need to renew my subsciption, please help!

the card I used to pay for my creative cloud subscription, no problem right? just enter the new card in and taddaaa everything should work right? no
nope
it wont let me open photoshop because it says i need to renew my subscription
well it charged me yesterday when i changed my card over yesterday and its still telling me i need to renew my subsciption
even though on the adobe site it says my renewal date is july 27, 2015
sooooo... anyone help me with this?
also im on a windows computer if that helps!

This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

How to open a Cash Drawer in AS3? NEED ANSWER ASAP!!!

Is it in anyway possible to open a cash drawer in actionscript 3 (Flash CS5) that is connected to a receipt printer. NEED ANSWERS ASAP!

You're right ! But my printer is connected via the ethernet port and i need to use the print API to communicate with it. In ActionScript nothing works I tried to send the escape sequence that should open the drawer : String.fromCharCode(27)+String.fromCharCode(112)+String.fromCharCode(48)+String.fromCharC ode(53)+String.fromCharCode(53) ... it didn't work.
So i decided to call a little Java program (JAR) through the Air NativeProcess API. This program send the escape sequence to the printer using Java print API.
Thx for the answer

Down loaded new version of Pages. Now can't open a document and get message I need a newer version of Pages to open. How can I get it to open

I download the new Update for Pages (5.2.2)on September 8th. Now I can't open a document I created in 2012. I get message "You need a newer version of Pages to open this document" What can I do to get this doc to open

First, open Finder, go to Applications folder and delete iWork '06. Then, open Pages and it will use the most recent version

I have a question about Open GL and Cocoa

I want to write an application for my desktop MAC that will let you navigate through the aisles of a store. You will click the mouse to select the path you will follow through the aisles. I originally designed the picture of the store aisles using HTML, and used PHP to do the selecting processing. Is that approach reasonable, or would using OpenGL or Cocoa be the more appropriate approach? Thanks for any insight on this.

You are really in the wrong forum to be asking that, you need to become an Apple developer, I would begin by posting in their forums:
https://developer.apple.com/devforums/

Question about open and close of MySqlConnection

hi
i'd like to ask a question.
  MySqlConnection connection = newMySqlConnection(stringConnection);
                MySqlCommand cmd = connection.CreateCommand();
                connection.Open(); and i have a try catch. accoding to your opinion, i should put connection.Close() in the block of try,or outside of block of try? according to you,if i open the connection and do not close,is it bad?or i open 2 times(using different istancse,like connection1 and connecton2),is it ok? thank u very muchbest regardsmartin

This code will work in tests. But it will propably fail in a production environment. You don't even close the connection and that is bad enough. This is how you should never,
EVER work with disposeable objects!
try
MySqlConnection connectionLev = newMySqlConnection("server=P30LSIMUL;user id=root;database=cncp20l");
MySqlCommand cmd = connectionLev.CreateCommand();
connectionLev.Open();
Console.WriteLine("OK");
catch (Exception ex)
Console.WriteLine(ex.Message);
try
MySqlConnection connectionLev = newMySqlConnection("server=P30LSIMUL;user id=root;database=cncp20l");
MySqlCommand cmd = connectionLev.CreateCommand();
connectionLev.Open();
Console.WriteLine("OK");
catch (Exception ex)
Console.WriteLine(ex.Message);
If code like that runs in any production environment, you are about to get fired.
From a catapult.
SqlConnections implement Finalize so when the GC does collect them, they will be properly closed. That can be anywhere between "milisccond the reference vanishes" and "the programm is closed after 100 years of the computer running without
a hitch and reboot."
Put one of those blocks (or both) into a loop that runs 100 times and you will run out of avalible SQL conenctions.
Since you alraedy have a try...catch block, just use the construct that Magnus showed you:
Put the variable outside of the try (so finalize can access it). Check for null (in case an exception happened before/during the creation, not during the use of it) then Dispose.
Note that finalize is even run after the function it is contained in returns (about the only code that can still run then). And that you should always log/expose ex.ToString(), never only the message (that one contains only 5% of the information, the otehr
95% are much more important).
More tips about exception handling:
http://www.codeproject.com/Articles/9538/Exception-Handling-Best-Practices-in-NET
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

2 simple questions about opening and closing seperate windows via iWeb...

I'm a web newbie, so please excuse me for my lack of terminology. My questions are... 1. How do i have iWeb open a separate browser window "simultaneously" from my main page to display a quicktime movie or piece of artwork? 2. Is it possible with iWeb to create a "close" window button within that same seperate window so that the veiwer does not have to click the red button in the upper left hand corner. Thanks guys and girls!
G5 Dual 2.3 Mac OS X (10.4.5)

Sorry! i meant I tried all of the links that are on your web page. There are quite a few of them and I watched most of the movies but there aren't any that open on a new window with a link to close it. I thought that happened because I had a pop-up blocker but even after dissabling the blocker and trying opening some of them again they still opened in the same window. I did come accross a couple of links that changed the window and made it do wacky thinks like moving fast left and right and forcing the window to get smaller. Kinda fun but this is not what I had in mind.. lol The rollover javascript is nice but I couldn't find it on the page's source. Is it the part that says "<script language="JavaScript1.2" src=..."? I'm just curious to know which software you used to make the flash movies and how difficult it was. Maya rocks by the way!

I have a question about opening InDesign because I have messages I need answers to.

Similar Messages

Maybe you are looking for