I have a question about removing scratches from your iPod?
Hi,
I was looking though a flyer I got in the mail from a computer store and they sell a product called "Apple Suace" that is supposed to remove scratches fom your iPod in 2 steps. I was wondering has anyone tried a product like this for their ipod Does it work and is it safe to use on your iPod?
lizabler
Fifth Generation iPod Windows XP
I have tried Apple Sauce, and have to say that
iCleaner does a better job, and it also cleans the
back of the iPod which the sauce does not.
http://www.ipodcleaner.com
Thanks for the tip. Can you buy the iCleaner at the store or do you have to buy it on the internet?
Thanks for your help,
lizabler
Fifth Generation iPod Windows XP
Similar Messages
-
Removing songs from your iPod?
I've heard of software that allows you to remove songs from your iPod. anybody know if this exists? i went to the macstore and they sold me on Tune Transfer which allows you to upload songs from an ipod to my mac but the songs remain on the iPod. thanks
Kristin,
sounds like the software transfers a copy of the song to your computer. Check your hard drive for the music (most likely in your iTunes Music folder) and if your music is in there, you can then delete the songs from your iPod using iTunes. -
Question about Removing Permissions from the System Folder with chmod
Hi
I have a question about the removal of permissions from the System folder (and sub directories and files).
Background
Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
The Problem
The issue that remains is a permissions check using Disk Utility keeps reporting
ACL found but not expected on "System".
followed by an extensive list of sub directories and all.
Attempts to repair take hours and the same errors are reported.
Found Solutions
I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
sudo chmod -R -N ./System/* ( to remove all ACLs)
or
sudo chmod -R -E ./System/* ( to replace all ACLs )
My Question is ( to the UNIX gurus):
What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
Many thanks!!OK
So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture... -
I have a question about data aqusition from PCI bus
Hi.
I am designing a PCI card.I wonder if I want to do some process in LabVIEW,such as power spectrum analyse, oscilloscope, do I have to transfer the data continuously from my card?
Thank you.Simple answer - no.
More complex answer - LabVIEW is just like any other programming
language when it comes to data collection frequency. The
frequency (intermittent, continuous, timed, etc.) depends upon the
analysis you are attempting. To do power spectra or display
waveforms, all you need is one set of data at a time. The data
does not have to be continuous. There are classes of problems
which require continuous data. If you are trying to address them,
you will need to have this mode of operation available. Most NI
input boards offer both modes - continuous and intermittent, with
intermittent being the most used, by far.
Note that with proper buffering, both modes end up being about the
same. Whether your buffer resides on the card (preferred, is more
robust, data transfer timing is not so critical) or in the computer
main RAM, the LabVIEW side of things will always take a single set of
data at once. Admittedly, this data set can be one point at a
time, but you really don't want the overhead of that in LabVIEW (or any
other higher level function - should be in your driver).
This account is no longer active. Contact ShadesOfGray for current posts and information. -
Question about moving music from an iPod to your computer.
In my household, we have iTunes on three different computers. My mother downloaded music on my brother's computer, and it's on his library. We want to burn a cd with the purchased album, but his computer does not have a cd burner, but the other two do. Is there a way to move music from one computer to another, or possibly moving music from an iPod to a computer's library?
Music is synced to iphone from itunes.
Plug in iphone and select whatever you like to sync from itunes to iphone.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf -
so i have been trying to remove some music from my iPod but some of it it isn't letting me cause i used a older version of iTunes to download it on my old computer but know i can't remove it any help
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Can Anyone help I have a question about ordering items from iphoto
HI,
My question is .... Ive just moved from Australia to London & I am unable to order items Ive made in iphoto & have them sent to London.
Previousely ,living in AustraliaI had no problem & Ive ordered items from iphoto that Ive created here in Lonond & had them sent back to Australia no problem.
But I just cannot create here in London & then have them sent here,even if I change the credit card details ....
Does anyone know how to tackle this ?
Regards
Lyndajane28Thank you LarryHN, you are a superstar... Ive been struggling with this for a while now & you have solved my problem ..Thank you Thank you Thank you
Regards
Lyndajane28 -
Removing scratches from an iPod Mini
I have a silver/aluminum iPod Mini which has a few small scratches on the body & screen. The body isn't much of a problem but the screen is. Which of these 2 should I use for just the screen: iKlear iPod Apple Approved Screen Polish Cleaner Kit -or the- iKlear Apple Approved iPod, iBook, LCD/CRT Monitor Cleaner-Travel Singles.
Once I get the scratches out of the screen, the whole iPod will have a 'skin w/screen protection' put on; so I may not need to use the scratch remover more than a few times.
iPod Mini 2nd Gen Windows XP ProTry iCleaner their stuff works really well. iKlear sells it on their site or try this link
http://www.ipodcleaner.com -
Question about receiving mesage from those not on ...
I have a question about recieving message from those who are not on my contacts
I enable anyone to contact me through IM and call. a friend who I did not yet add as a friend (not in contact)call me by mistake. he sent message of apology to me, say "sorry for mistakeing call,"
but, i did not recieve such mesage, even thoughh i got notification of call, why did not i recieve his mesage if i Can receive IM from anyone not on contact list??
i try to send him mesage to test. He also did not see my mesage show up ,, on his screen it only show that he call by mistake and that he sent mesage ((which, i never recieve).
i try this on some of my friend's friend who has enable all call and IM through, they also did not recieving mesage I sent them however can see notification of call i make.
does this mean, Only you can see mesage of those in contact list even though you recieve from any body? am i misunderstand How skype is working? Please enligthen me, thx...
thx for info.....I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.
-
I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened
https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem. -
Question about tranferring data from iPhone 3gs to iPhone 4
I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution. -
Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
HeatherIn researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR -
Hi, I have a question about iCloud. I have an ipod 4th generation and im getting a 5th generation. i have lots of games such as subway surfers and temple run 2. I worked and played really hard on earning stuff and have also made in app purchases. Does iCloud save that kind of stuff?
See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
However, not all in-app purchases will transfer to another device. For which ones ill not see:
iTunes Store: About In-App Purchases -
Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how. It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !
Thank you !!Hope this helps.
1. Empty Trash.
http://support.apple.com/kb/PH10677
2. Start up in Safe Mode
http://support.apple.com/kb/PH11212
3. Delete "Recovered Messages", if any.
Hold the option key down and click "Go" menu in the Finder menu bar.
Select "Library" from the dropdown.
Library > Mail > V2 > Mailboxes
Delete "Recovered Messages", if any.
Empty Trash. Restart.
4. Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
5. Disk space / Time Machine ?/ Local Snapshots
http://support.apple.com/kb/ht4878
6. Re-index Macintosh HD
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409
If this does not help, you have to buy an external HD and move your movies photos.etc to
the external HD. -
Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!
Maybe you are looking for
-
How do you go back to iOS 7 on iPhone 5?
My iPhone doesn't work properly after update to iOS 8.
-
How to Save a file in InDesign 5 so it will open in InDesign 3 (no InDesign 4)
How do I save an InDesign 5 file in InDesign 5 so it can be opened by my graphic designer in In Design 3. Neither of us have CS4. She thinks she cannot open an .IDML file on In Design 3. Can she? What do I do to save it to get it to her so she can o
-
How can I download a movie bought in itunes in my new ipod?
I bought couple of movies about a year ago for my iPod touch 3G but it got broken so I´ve got me a new one, the problem now it´s that I can´t download the movies, iTunes is asking me to pay for them again! The rest of my apps and music it´s already
-
Alphabetize documents in iPad pages not imported in the same session
I had to import over 40 files to iPad pages from Word 2007 on a Windows laptop. It was confusing to have to import one at a time and so I missed two or three. When I went back to add the missing ones they are then added to the end of the group rather
-
Run procedure in Application Server from the command line
Hi I created a procedure (VARKPI and placed in C:\Program Files\SAP BusinessObjects\Strategy Management\ApplicationServer\home) to call another procedure (VAR_CRE, this is created in the model). Nothing is happening and no error message also. This is