I have a question regarding emails being marked as unread when syncing with an exchange account.
I have a question regarding emails being marked as unread when syncing with an exchange account.
In the evening I can see I have 10 unread emails on my exchange account. I leave them unread. The following day, at work, I view and read all my mails from today and yesterday, so that I have NO unread messages. When I then sync my iphone it marks only the mails from today as read but, leaves all the mails from yesterday marked unread. Only solution so far is for me to go through the mails on my iphone one at a time for them to be marked as read.
My mail account is set to sync 1 month back.
I have had this problem on all the iphones I have had.
I currently have an iPhone 5 and my software is up to date.
What am I doing wrong?
Hey kabsl,
Thanks for the post.
What type of email account is attached to your BlackBerry Z10? (POP3, IMAP, Exchange). Also have you tried removing and re-adding the email account to test?
Is this email account only setup on one computer or several computer?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!
Similar Messages
-
Email being marked as unread after a reply in 2013 Pro Plus
Starting this week, anytime I reply to an email from Outlook 2013, the email is being marked as unread. This causes my phone, ipad, and other devices to show that I have an unread message when I do not.
Hi,
Do you have any add-in installed in your Outlook? If so, we may try to start Outlook in safe mode to see if this issue is caused by nay problematic add-in. To do this, press Windows key + R to open the Run command, type
outlook.exe /safe and press Enter. If this issue would be gone in safe mode, please go to File > Options > Add-ins and disable suspicious add-in to resolve the issue.
If this issue continues in Outlook safe mode, we may also try to login to webmail interface and check if this issue can be reproduced from there.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Problems with email addresses when syncing with MS-Exchange
When I sync with MS-Exchange, everything is great except for the email address. I get IMCEAEX-o=BlahMail_ou=BlahUS_cn=Recipientscn=[email protected] I tried to play with the email address in exchange, but it is always doing some auto-lookup to the person and never taking just the text.
Thanks for any help.It seems the imceaex is Exchanges "IMC Encapsulated Address Exchange". Something for simulating X.500.
Anyone have any idea? -
Received emails being marked as read when they are unread!
Since downloading the ios7 update on my iphone 5s I have had an issue with my emails. I have two accounts (both yahoo) linked my phone which I use for business. Therefore receiving emails is of the utmost importance. Basically what happens is this. I will receive a tone to say I have an incoming email. When I look at the home screen it may show as an example that I have 2. However, when I click into the email icon on the home screen to read the incoming mail it shows many more received earlier that I was notified if and they are shown as read. I spoke to apple about this several weeks ago and they advised me to reset my phone, which I did. It fixed the problem but now several weeks later it has come back. Can anyone help as apple have no clue as to how this happening. It is getting to the point where I am losing business as clients email me to say they sent a mail several days previously which clearly I have missed. I don't have this problem with my ipad - the emails are working perfect on that.
Sounds like you both have the same messed up add on. Try restarting Thunderbird with the add ons disabled and see if things go back to normal.
You can do this from the Help Menu. -
Among my new problems.
1. The alphabet is now missing from the opening page of my Address Book.
2. How do I set my email page as the opening page?
3. When I finish answering an email, send it and click “Delete” on the just answered email, it doesn’t delete but instead opens a new email page I have to then close and go back to the in box, check that old message and delete it that way. How can I correct this?
4. How do I set up a default type and size large enough for me to read?
5. How do I turn off the automatic paragraph indentations when I number or letter paragraphs?
6. Sometimes when I click “Send” on an email, it takes many seconds to leave. Why?
I’ll sure appreciate any help.
BruceThis should answer your questions
http://support.apple.com/kb/index?page=search&src=supportsite.home&locale=enGB&q=transfer%20itunes%20to%20new%20PC -
Emails for Current Day are not sync with Microsoft Exchange server
I have bought a Z1 and configured my microsoft exchange server email on it. All is working well. However it is only showing emails till yesterday. I have tried all sync settings including automatic, all, one day and all others but still it is not showing emails for current day. I have also tried all sort options but still no improvement.
The same setting are working perfectly fine on my Samsung Galaxy Note 2. What is the issue and how to fix it? Please make sure i have purchased a new phone and would use the stock email app and no third party email app.
Already there is a downgrade in Z1 stock email app. It is not supporting formatted signatures and formatted outgoing emails. Which is now very common on all phones of its price and class.
What is Sony doing on its phones? i do not understand.
Please let me know how to fix my issue of most recent emails sync.http://office.microsoft.com/en-us/support/set-up-email-on-an-android-phone-or-tablet-HA102823196.asp...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
How do I have my iphone (3gs) override the desktop address book when syncing with iTunes?
My desktop address book is incorrect and I can't seem to restore it from time machine. My iphone contacts are correct. How can I have the iphone override the desktop address bookwhen I sync it with iTunes?
For some reason during the sync it finally asked me what to do about the conflict - it hadn't asked me before. So problem has been fixed. Thanks.
-
I have some questions regarding setting up a software RAID 0 on a Mac Pro
I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html -
I have a yahoo email account setup on my iPad & iPhone. The new mail is never marked as unread when downloaded to my iPad or iPhone. Is there anyway to fix this?
Hey there Fabian,
If I understand correctly you are going to Settings > Mail, Contacts, and Calendars > Add Account but that last option is not usable because it is gray. In testing this for you, I was able to reproduce this by enabling Restrictions and denying Account Changes. You can configure that with this article:
About Restrictions (parental controls) on iPhone, iPad, and iPod touch
Thank you for using Apple Support Communities.
Regards,
Sterling -
I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?
I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone. -
Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6./*line 957 error */
public void select()
for (count = 0; count <= p; count ++ )
if(P[count] != null){ /* validation */
m = (int)(P[count].getX());
n = (int)(P[count].getY());
if (Math.pow(-1, m + n) == 1)
piece[m][n].setBackground(wselect);
else
piece[m][n].setBackground(bselect);
step = 2;
} -
Opened emails marked as unread when I have read them?
I have an ipad mini. Why are all of my emails marked as unread when I have read them all. This has only happened in the last two days!
On my iPad with OS7 I had a red dot showing 1 unread email which would not go away. I cleared it using this procedure: Open Mail - Inbox - Edit - Mark All - Mark as unread. Then straight back to: Edit - Mark All - Mark as Read. Works for me; see how it goes. Best of luck!
-
Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx 65 KB -
I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?
It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Maybe you are looking for
-
How to create a document with sections that differ in margin and layout
I'm trying to add a pages document 'B' into my new pages document 'A'. A and B have two entirely different layouts and different document margins. So whenever i copy B into A, B's margins become A's margins and thus B's layout turns into a mess. I tr
-
Is there anything that might possibly be done to try and fix this? I have only had my touch for about 10 months. It was working fine and when I was using it to take photos it said low battery,I hit ignore took a few more pix then put it away.When I g
-
One computer on network will not print.
I am using a HP LasterJet P2055dn network printer on a small office network that has 3 computers on it. All computer are wired. For some reason I can not get one of the printers to print. It is using XP. I have used all the HP utilities to try and fi
-
XF-I & Call Of Duty-United offensive EAX odd noi
When I set Call of Duty: United Offensi've to use EAX (,2 or 3) I'm getting sudden bursts of environmental sound. Maybe 2 or 3 every minute or so. e.g. sudden bursts of tank noise or footste ps. I'm running a Shuttle SN95G5, X-FI Extreme Music, XFX 6
-
Hopefully someone can help me with the following problem, I'm trying to setup a demo of portlets for a customer. I've downloaded the latest portlet wizard addin that supports JSR 168. But after following the installation instructions it did not work