I have a question to HU16E about OCing for P67A-GD65 board
im currently struggling with OCing on P67A-GD65 B3 board.
it seems like 2600k going to 4.4GHz with 1.3 vcore fine.
but going over is bit confusing.
i noticed HU16E has gone over 5.0~ speed. do you mind to share which settings you put in the bios?
my goal is to go about 4.8-5.0GHz.
thanks in advance :]
Quote from: jksluv on 23-April-11, 13:36:36
whoop sorry about that. i was just in hurry to have more stress tests.
these are the components that i have
MSI P67A-GD65 B3 Board with 1.10 BIOS
Intel 2600k Sandy Bridge D2
Corsair H50 Liquid CPU Cooler
4x4GB Corsair Vengeance 1600mhz
GeForce GTX570
i was able to OC 2600k up to 4.4GHz by just by upping the vcore to v1.300.
but i feel like going up to around 4.8 will need me to config all other voltages but i cant figure them out :S
im testing 4.5GHz with the same vcore ATM. but im sure it'll BSOD anytime soon
Imo enable int ppl set vcore to 1.4ish and go 48*100, if your lucky ull have 4800mhz stable, i use these settings didnt really change anything els and im getting 50*100, works perfectly.
Similar Messages
-
I have few questions to ask about the Expert Series and Valet Series
Hello.
I have few questions to ask about the Expert Series and Valet Series.
1. I see there aren't any print server/bridge/access point for these two new series. Do I have to use previous ones? Or the new ones are in planned in near future?
2. Do I "HAVE TO USE CONNECT SOFTWARE"? Can I just use web interface to do every setting that these routers features?
3. Does expert series routers support guest network and parental control?
4. When I look into informations of these router, some router doesn't give information about backward compatible to older standards. Do I have to consider that as they are backward compatible with older standards?
Ok, that's all for now.
If I need to ask more questions I will do that in this thread as replyWith the New Expert or the Valet Series Router, you still can use the Print Server / Bridge and Access Points.
Well with the Expert and Valet Series router, you have an option to User Cisco Connect Software or you can User Web Interface of the Router. But with the Cisco Connect Software you have an Advantage of creating a Guest Account and using Parental Control , which is not available using the Web Interface.
These both the routers are backward compatible and they can connect to your G Series Product. -
-newBee-Im tring to use Creator 2 EA 2 and have several questions -
Hi
Im tring to use Creator 2 EA 2 and have several questions - i will be thankful for reciving answers.
0-It take 300 meg of my memory in small 10 page sample project / is it normal ? (memory shown in task manager windows XP)
0-Where i can find documents about Creator way of using RowSet technology ?
I have several question which i could not find answers in documents or online tutorials my questions are :
1-for example i have a table in a data source ? how i can access my table ?
2-i bind fields of jsftest table to texteditors i can save changes to current field
by using : jsftestDataProvider.commitChanges();
Now how i can insert a new ROW ?
i tried jsftestDataProvider.appendRow(); in another button action but it insert null items
into database / how i can add a row to my table
3-how i can delete a field based on a field value ? or even primary key value ?
should i write the sql Script in Session bean method and use that in my jsf pages ? or maybe RowSet technology has some
solution for this ?
4-How i can use HTML tags (not jsf tags)inside a jsf file ?
is it possible to use them or not ? for example to generate a table with some dynamic column number?
5-is it possible to use JSP tag libraries like DisplayTag in jsf ?
6-does Creator 2 EA 2 support Myface ?
7-can i add html tags to result page in java source file ? for example in Action on a button add some HTML tag to result page ?
8-how i can pass url parameter between pages ? if i do not like to use request bean.
Its my question for Now ;)
Thank you for answeringHaha.... thats normal.
I've 768mb of ram, and i can still feel the lag, especially when the server and pointbase is one,
worst still.... i having JSC and Netbean running together -_-"
i think 1.5GB of ram wld be gd
Regarding the tutorial part, there are api in the "Dynamic Help" box,
What i did was extracting the java doc into my desktop for easy reference. JSC's screen is too small.
U can find these references under "C:\Sun\Creator2\rave2.0\docs". Just unzip them -
Question about statement for all entries
Hi Abap experts,
I have a question concerning the ABAP statement for all entries.
Explanations:
Let’s say that my source package (Source table) contains 2 types of data:
-type1
-type2
I would like to use the statement select from table into internal table
For all entries in source package
But the where statement changes depending on the data type (2 keys when data type is 1 and only 1 key when data type is 2) .
So that would be:
Type1:
Select fields
From table into internal table
Where field1 = source_package-field1
And field2 = source_package-field2.
Type2:
Select fields
From table into internal table
Where field1 = source_package-field1
How can I merge them assming that the field od data type is ftype?
Thanks.
AmineHi amine,
i think this is helpful for you.
there are 2 ways to use the for all entries...
1. with header line: this method is old one. in this method the internal table (ITAB) is automatically create workarea (WA) with same name, this method 1 drawback is there where we can use WA and ITAB confused that's why this is come difficult.
2. without header line : this is nowadays we can use this method. in this method we create separate ITAb and WA. very clear this method.
EXAMPLES:
1.WITH HEADER LINE METHOD:
PARAMETERS p_kunnr TYPE kna1-kunnr.
DATA:it_kna1 LIKE kna1 OCCURS 0 WITH HEADER LINE,
it_adrc LIKE adrc OCCURS 0 WITH HEADER LINE,
it_adr2 LIKE adr2 OCCURS 0 WITH HEADER LINE,
it_adr6 LIKE adr6 OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM kna1 INTO TABLE it_kna1
UP TO 100 ROWS.
IF NOT it_kna1[] IS INITIAL.
SELECT * FROM adrc INTO TABLE it_adrc
FOR ALL ENTRIES IN it_kna1
WHERE addrnumber = it_kna1-adrnr.
ENDIF.
IF NOT it_adrc[] IS INITIAL.
SELECT * FROM adr2 INTO TABLE it_adr2
FOR ALL ENTRIES IN it_adrc
WHERE addrnumber = it_adrc-addrnumber.
ENDIF.
IF NOT it_adr2[] IS INITIAL.
SELECT * FROM adr6 INTO TABLE it_adr6
FOR ALL ENTRIES IN it_adr2
WHERE addrnumber = it_adr2-addrnumber.
ENDIF.
LOOP AT it_kna1.
READ TABLE it_adrc WITH KEY addrnumber = it_kna1-adrnr.
IF sy-subrc = 0.
ENDIF.
READ TABLE it_adr2 WITH KEY addrnumber = it_kna1-adrnr.
IF sy-subrc = 0.
ENDIF.
READ TABLE it_adr6 WITH KEY addrnumber = it_kna1-adrnr.
IF sy-subrc = 0.
ENDIF.
WRITE : it_kna1-kunnr, it_kna1-name1, it_adrc-city1, it_adrc-street, it_adrc-po_box_reg,
it_adr2-telnr_long, it_adr6-smtp_addr.
ENDLOOP.
2. WITH OUT HEADER LINE:
TABLES: KNA1 , ADRC.
DATA : IT_KNA1 TYPE STANDARD TABLE OF KNA1,
IT_ADRC TYPE STANDARD TABLE OF ADRC,
WA_KNA1 TYPE KNA1,
WA_ADRC TYPE ADRC.
DATA: BEGIN OF STRTYPE ,
CUSTMERNO LIKE KNA1-KUNNR,
FIRSTNAME LIKE KNA1-NAME1,
LASTNAME TYPE NAME2,
CITY TYPE ORT01,
STATE TYPE REGIO,
COUNTRY TYPE LAND1,
ADDRESS LIKE ADRC-ADDRNUMBER,
END OF STRTYPE.
DATA : IT_1 LIKE TABLE OF STRTYPE.
SELECT-OPTIONS K_kunnr FOR kna1-kunnr NO-EXTENSION.
SELECT * FROM KNA1 INTO TABLE IT_KNA1 WHERE KUNNR IN K_KUNNR.
IF NOT IT_KNA1[] IS INITIAL.
SELECT * FROM ADRC INTO WA_ADRC FOR ALL ENTRIES IN IT_KNA1 WHERE ADDRNUMBER = IT_KNA1-ADRNR.
ENDSELECT.
ENDIF.
LOOP AT IT_KNA1 INTO WA_KNA1.
READ TABLE IT_ADRC INTO WA_ADRC WITH KEY ADDRNUMBER = WA_KNA1-ADRNR.
IF SY-SUBRC = 0.
STRTYPE-ADDRESS = WA_ADRC-ADDRNUMBER.
ENDIF.
APPEND STRTYPE TO IT_1.
WRITE : / WA_KNA1-KUNNR, WA_KNA1-NAME1, WA_KNA1-NAME2, WA_KNA1-ORT01, WA_KNA1-REGIO, WA_KNA1-LAND1, WA_ADRC-ADDRNUMBER.
ENDLOOP.
regards,
roopa.k -
P67A-GD65 to P67A-GD65-B3 question...
Hi all...
I have a MSI P67A-GD65 board that I will be replacing with a MSI P67A-GD65-B3. Will I have to reinstall the OS or will I just be able to do a swap, reconnect my HDDs, etc. and be off on my way?
Has anyone tried this?
Thanks for any info...Quote from: kingbobyjr on 15-April-11, 03:10:07
I have a MSI P67A-GD65 board that I will be replacing with a MSI P67A-GD65-B3. Will I have to reinstall the OS or will I just be able to do a swap, reconnect my HDDs, etc. and be off on my way?
IMHO it will be fine.
PS: My P67A-GD65 get W7 system after ancient Asus P5B-Dlx. I was worried a bit but it went ok. It was necessary to install some new drivers, that's all. -
I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened
https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem. -
Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
HeatherIn researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR -
Hi, I have a question about iCloud. I have an ipod 4th generation and im getting a 5th generation. i have lots of games such as subway surfers and temple run 2. I worked and played really hard on earning stuff and have also made in app purchases. Does iCloud save that kind of stuff?
See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
However, not all in-app purchases will transfer to another device. For which ones ill not see:
iTunes Store: About In-App Purchases -
Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how. It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !
Thank you !!Hope this helps.
1. Empty Trash.
http://support.apple.com/kb/PH10677
2. Start up in Safe Mode
http://support.apple.com/kb/PH11212
3. Delete "Recovered Messages", if any.
Hold the option key down and click "Go" menu in the Finder menu bar.
Select "Library" from the dropdown.
Library > Mail > V2 > Mailboxes
Delete "Recovered Messages", if any.
Empty Trash. Restart.
4. Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
5. Disk space / Time Machine ?/ Local Snapshots
http://support.apple.com/kb/ht4878
6. Re-index Macintosh HD
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409
If this does not help, you have to buy an external HD and move your movies photos.etc to
the external HD. -
I have a question about extracting pages. When I do the function, adobe saves the individual files as "<file name><space><page number>", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I am using excel to concatenate some data to dynamically build a hyperlink to these extraced files. It casues me problems, however, for the space to be the the file name. Is there any way to change the default behavoir of this function to perhaps use a dash or underscore instead of a space?
No, you can't change the default naming scheme. You can do it yourself if you extract the pages using a script instead of using the built-in command.
-
I have a question about DWG files. What app will allow me to open DWG files to view them on my Macbook Pro?
Perform this Google search: ".dwg files on mac." The results should provide answers for you.
-
I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do
Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I have a question about Configuration of Post with Clearing
I have a question about confiruation of the post with clearing which is t-doce 'FB05'.
When I make post with clearing on 'FB05', I can change the additional selections.
Where can I control the confiruation of the additional selections in t-code 'FB05'
Please, tell me the menu path.Hi,
In SPRO, go to
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Incoming Payments > Manual Incoming Payments > Make Settings for Processing Open Items > Choose Selection Fields
Hope this helps.
Thanks -
Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot afford to move to the creative cloud.....
there's no way for you to identify which machines have or had cs3 activated, and you can no longer purchase a cs3 license from adobe.
you can request an activation count reset (Contact Customer Care) and deactivate your cs3 on all your computers. you can then install and activate on up to two computers. -
I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?
Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC
Maybe you are looking for
-
Media Smart DVD, not that smart.... Will only play some blu ray, not all.
When I get a computer with a blu ray player I expect it to play blu ray discs... all of them. It works with some but not all. The discs it does not work with, what happens is it will ask me "Do you want to check for updates" and there will be a box t
-
HT4623 How do I get my hotspot back on my IPhone 4S?
I updated my phone to get the IOs 6.1.2 and it didn't work. I tried to restore my phone back to the update, but accidentally chose a restoration back to October prior to my acquiring a new data plan with a hotspot connection. Where do I go to restore
-
General Ledger Calendar Re-open Log
Hi, Is there a log report for the open - close - reopen of periods in GL? I want to know if a closed period is reopened and when. thanks, MangVoc
-
11.1.4 and 11.1.5 not working in windows 7 64bit
I updated to 11.1.4 and experienced the same problems as many others- uninstalling and re installing eradicated the error messages but the store never opened and my phone would not sync. I've up graded to 11.1.5 and now it is freezing, crashing- incl
-
My norton cards and logins has stopped working with firefox. how do I fix this?
I depend heavily on my Norton Cards and Logins Tab. I noticed that it has disappeared from my FireFox window and I have not been able to put it back. Is there an issue I don't know about or some way to fix it?