I have a regular service that cleans up my computer. We have had to remove the latest version three times because of compatibility issues. To report issues you have to download the latest version which appears to be the problem.

Mozilla sometimes goes a head and loads the new version and we do not get it in time. We may switch to Explorer to avoid continuing problems. Contact iYogi or McAfee for clearer explaination.

If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.

Similar Messages

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

    I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

    Hi anatuta, 
    Thanks for visiting Apple Support Communities. 
    It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard. 
    If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store. 
    You may find the steps in this article helpful with finding the items:
    Mac App Store: Finding your purchased apps - Apple Support
    If you do not see the items in the Purchased section, they may be hidden:
    Hide and unhide purchases in the Mac App Store - Apple Support
    All the best,
    Jeremy 

  • The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

    I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    OR
    Asked to sign in after paying may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    or
    http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

  • We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problems happens to a lot fo friends after the upgrade! Is it possible to remove the problem?? Thanks. Mauro, Italy.

    We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!

    We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!

  • I have changed my apple password three times because I keep getting an error message that my password is wrong when I try to log into the App storer

    I have changed my apple password three times because i keep getting an error message when i try to loggin to App Store.

    You may want to. I know that I've activated a few iPhones that belonged to other people on my own Mac and for some reason, no matter what they did, it always asked for my account password. I have no idea why this happens though.

  • HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

    After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

    Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
    Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
    Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

  • The computer that I original used with my ipod touch is dead, so I am now synching and backing up to a new computer.  I had to restore the software to this ipod.  I can drop and drag my tunes back into the ipod, but not my apps.

    The computer that I originally used with my ipod touch is dead, so I am now synching with another computer.  I had to restore the software of the ipod, I am able to drop and drag my tunes back to the ipod but not my purchased apps.  I have no problem doing this with other ipods that I have synced and backed up to this computer.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. H

    I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?

    make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    copy the installation files to a desktop folder and install from there.

  • I have Adobe Acrobat 9 Standard on both of my computers.  Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.  After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software v

    I have Adobe Acrobat 9 Standard on both of my computers.
    Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
    After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
    The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
    Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.

    ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/

  • I have to downgrade from Yosemite to Snow Leopard because of compatibility issues with some of my software.  Can I use PS Elements 12 with snow leopard?

    I have to downgrade from Yosemite to Snow Leopard because of compatibility issues with some of my software.  Can I use PS Elements 12 with snow leopard?

    PSE12 became a 64 bit app for the first time on Mac. The recommended system requirements are Mac OS X v10.7 through v10.8.
    Are you not able to use lion or Mountain Lion?

  • HT5654 I had to remove my old version of itunes because I was having problems with the latest update. Now I am tryin to download the lates version and it keeps telling me I am not the administrator.How can I downdoad itunes?

    How can I reinstall itunes without it telling me that I am not the administrator?

    The iTunes app on your device is bundled with iOS.
    The latest version of iTunes for your PC is 10.7:http://www.apple.com/itunes/
    If you have the latest version of iTunes installed on your PC, and are still having trouble with the device, try this:
    1.  Connect your device to your computer.
    2.  Listen for the "new hardware found" beeps.
    3.  If you do not hear the beeps and if iTunes does not automatically start, try a different USB port. 
    4.  If you still do not hear the beeps and iTunes does not run, try a different charging/docking cable.
    5.  If that fails, then try connecting your device to a different computer.
    6.  If this fails, the device is defective.

  • I have just downloaded OSX Mavericks and am having a lot of problems with my iCloud account. I get a message "this iMac can't connect to iCloud because of a problem with (and then it quoted my e-mail address) Does anybody know what the problem could be??

    As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
    I do this and no matter what I seem to do this message continues to return.
    Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
    Many thanks
    Mike

    Hello John
    Sorry I haven't got back to you sooner.
    Thanks very much for your help, your solution solved my problem.
    Thanks again and kind regards
    Mike

  • I'm working on my iMac PowerMac8,2 PowerPC G5 (3.1) 2 GHz machine and have been having problems with the computer shutting down unpredictably. After the problem becoming impossible to work with, I shut the machine down. Now a little better, but reoccuring

    I'm working with my iMac PPC G5, PowerMac8,2, 2 GHz machine running OS X 10.4.11, and was having a problem for a while with the machine shutting down unexpectedly. There was no clear pattern to when it was shutting down as far as I could tell. For a while, it would also not restart when buttoned on.
    I set the machine aside for a while, probably a month or more, and then got it back out after its rustication. It started up and runs significantly better than it had been, but I have noticed it shutting down sometimes now again, though not as frequently as before. Sometimes it runs for a good long time between active work, sleep mode, and active work again. Once in a while it does shut down when no one is working on it (while asleep). But now it always restarts when buttoned on.
    I've done the thorough vacuuming of any dust from the unit vents. I wonder if there's anything else I should try. In most other ways the machine works pretty well and has become the family desktop for basic uses, so I'd like to keep it running if I can. A little frustrating to not be able to upgrade all programs (iTunes) to useable versions, but that's another story....
    I would appreciate any ideas about the shut down problem.
    TCC

    Option 1
    Reset your PRAM.  Press and hold down the Command Option P R keys while starting your computer.  You will hear the startup chime.  continue holding down those keys until you hear the startup chime a second time.  Release the keys.  If the computer restarts, you will need to reset your Date and Time.  It might be time to replace your PRAM battery.  The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
    http://eshop.macsales.com/item/NewerTech/CR2032/
    You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
    If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself.  Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
    http://eshop.macsales.com/installvideos/imac_g5_mem_m/
    While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can.  Also inspect the 28-30 capacitors on the logic board.  Look for dark spots, if they look puffy or swollen, or leaks.
    Option 2
    Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer.  Let it sit for one minute.  Press and hold the power on button on the back of the iMac while plugging in the power cord.  Release the power on button.  Count to five, the press the power on button again.
    Option 3
    Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer.  (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.) 
    Continue holding the C key until you see the OS starting to load.  DO NOT do an OS installation.  At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility.  On the left side of the window that opens,select your normal OS drive.  Click First Aid at the top middle of the window if it isn't already selected.  Click Repair Disk from the lower right area of the window.  When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
    When that is done, quit Disk Utility.  From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk.  Restart the computer.  If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
    Good luck.

Maybe you are looking for