I have a Samsung printer CLP that used towork on Airport and no longer does, Printer works oK when plugged in as USB What can I try?
Mabook with Snow Leopard Samung CLP 510 Airport
You cannot install the apps on the car.
The cars head unit is merely acting as an interface to the apps on the device.
If you want to use those apps in the car, plug the device in and leave it plugged in.
Similar Messages
-
I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.
I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK. It keeps telling me that this router is not supported. There is no firmware to roll back to. It worked fine until a power outage. HELP!
If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router. -
I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem?
Did you go through all the options?
Also this:
Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again. -
I have a mac book pro 9,2, with intel corei5, 2.5 GHz., 1 processor, 2 cores, L2 cache (per core) 256KB, L3 Cache: 3MB, Memory 4GB, Boot Rom Version MBP91.00D3.BO8
System Software Version : OS X 10.9.5 (13F34)
Kernal Version: Darwin 13.4.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Secure Virtual Memory: Enabled
Regarding the Macintosh Hard Drive:
Available space 208G.66GB , Capacity 499.25GB
Intel 7 Series Chipset, Link speed 6 Gigabit
Apple HDD Toshiba MK5065GSXF, Revision GV201B
Using Kodak ESP Printer 5200 Series AiO
Memory slots Bank0/DIMMO 2GB DDR3 1600MHZ and BANK 1/ DIMMO 2GB DDR3 1600MHz
The problem I am experiencing is a slowness of response between changing from various applications. What steps could I take to clean up the boot speeds, the applications speeds and general performance of the computer? I would like to restore the speeds of that when it was new.
Thank you for any suggestions you may have.Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Does anyone know it the Recorder apps only works in the U.S.? I think I made a mistake buying this to record some phone conversations for work and now I cannot record a phone call to a number in Spain. I mean my phone number is Spanish. Please help. Can you return an app if you are not satisfied?
Sorry, no. The terms state, you buy it, you own it, there are no refunds.
-
Using Two-Phase Commits and Data Sources does not work with OCI
Hi,
i tried to configure 2pc with OCI.
when i use thin like shown in :
http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14012/datasrc.htm#sthref578
everything works.
If i change the url from thin -> oci
the transaction is rolled back.
The documentation says
http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14012/datasrc.htm#i1085507
for using oci. But if i use this in thin mode, it breaks even the thin mode.... ;-(
Can anybody help?It is fixed in 10.1.3
-
I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer. How can I get my new Imac to read these dvd's? Will the mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with the Mac? Do I need anything else to get the dvd material onto my mac? Thanks!!
No DV port in camcorder. Just a yellow AV port/hole. I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's. Can I use this with a Mac? Could I connect a dvd player to the Canopus and transfer the disks onto my Mac? Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way? Thanks again!
-
I have a macbook pro 5,3 white I am trying to hook up to a samsung hdtv. I have used a mini dv to hdmi adapter but I get no sound on my tv. What can I do to get sound?
The Mini DisplayPort-to-HDMI adaptor will only pass video in most cases. You will need to run a separate audio cable along with it. Likely a 3.5mm (male-to-male) cable. Or a 3.5mm (male) to red/white RCA (male) cable. Just depends on what audio input ports your TV has dedicated to the HDMI input.
-
I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..
Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media. -
Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8 years, and no longer have password. Any ideas how I can re-access/recover that music?
Apple ID FAQs > http://support.apple.com/kb/HT5622
-
I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this? I am a total MacBook nube and can use any help you may offer! Thank you so much.
How you enable double-sided printing can depend on the applications from whick you wish to print. Example: if I print to my HP PhotoSmart from Safari, I get this print dialog box:
(Edit: OOPS! Note that I forgot to switch printers when i took the scene-shots, so ignore the "Brother" reference. It's should look the same for your HP.
Note the selection labled "Safari" near the bottom. If I change that form "safari to "Layout: I get this:
Note the option for two-sided printing appears for your selection. If I print from Word, the box is different:
The "Copies & Pages" option can be changed to "Layout" when you click it, again allowing the selection of two-sided printing.
If you tell us what applciaiton is vexing you, we may be able to give better-focused information.
A -
Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a pop-up menu in the cells in time format, does it have any consequence on the formula?
Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a pop-up menu in the cells in time format, does it have any consequence on the formula?
-
I have a MacBook Pro using my Apple ID and Password, can I home share with my wife's iPad that uses her Apple ID and password
You have to all be signed into the same Apple ID and on the same WiFi network, but yes you can do it. You have to sign into her Apple ID on your iPad in the store settings.
-
I have installed printer software that needs to be uninstalled and reinstalled and I keep getting an error message saying that the application is running and needs to be closed before proceeding. I do not know how to close applications and uninstall software. Any help????
If its an actual application and appears as an icon in applications then click and hold over the icon and drag it to the trash can. That should uninstall it as far as I know.
If its like the HP printer software then there is an uninstalled icon within the folder.
Hope it helps. -
Please help! I have an ipad that I purchased in Australia and my iTunes account is Australian, but when I try and watch Australian TV shows on Australian websites it says that the content is not available because I am not in Australia. How can I fix this?
Are you using a proxy server to access the net?
Or another cause could be that your router thinks it's in its home country (probably china)
I just don't know how to fix it. There's a way but I don't know enough to advise.
You could try googling your router model and 'wrong country' or keywords like that and see if something comes up.
Maybe you are looking for
-
Hi all, In a report, I must change the cost center for Purchase Requisition and Purchase Order. In my opinion I must use the bapi: "BAPI_REQUISITION_CHANGE" and "BAPI_PO_CHANGE", but I don't know how to use. Is this correct ? If yes, can someone expl
-
How to put files in Oplayer hd with itunes
I am trying to setup oplayer hd to watch movies on my ipad. To stream them from my IMac using Oplayer hd to my ipad mini. I have found a description of how to do this at: www.blogtechnika.com/watch-any-video-on-your-iphoneipad-with-oplayer/ The desc
-
I have 3 ipads and when i got them i started to link them or register them..whatever u call it. The first one hooked up right away, the other two were easy and linked to my wifi ..but they both say that they are NOT connected to internet?? the first
-
CastCastException with OracleCallableStatement
I'm trying to use Oracle JDBC extensions with the Oracle thin Driver (to read a cursor returned by a PL/SQL function). When I attempt to cast a CallableStatement to an weblogic.jdbc.vendor.oracle.OracleCallableStatement, the weblogic wrapper class, I
-
IBook G4 won't wake up or restart
System: iBook G4, purchased June 2005, running 10.4.x (whatever the latest update is) A little backstory: For the past few days I've had trouble waking up my iBook. When it didn't wake up, I just restarted. I also noticed that the charging light wasn