I have a samsung s4 and i need help downloading the photos to my macpro, i have a samsung s4 and i need help downloading the photos to my Mac Pro

i have a samsung s4 and having trouble downloawding my photos to my macpro

If you're talking about an iPhone, iPad, or iPod Touch, a good place to start would be in the Settings App. Open Settings, go to General, then Reset down at the very bottom. Choose Reset Home Screen Layout there. The apps are obviously installed, so they likely just have the icons hidden.
If that doesn't work, or you're using a Mac, please let us know your device and operating system version like Seventy One asked.
Good luck!

Similar Messages

I have a Mac pro(1 free bay) and a mac mini I need to back both of them Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

Mac pro 1,1 (using 10.6.8 - Need 10.7) thanks to Lightroom 5

Hello has anyone with the
mac pro 1,1 (aprox year 2007) been able to use Lion OS 10.7 or above?
its a Dual core intel Xeon 2.66 L2 4MB
I upgraded my video to ATI radeon HD 5770
I have been running nicely on 10.6.8 with CS6 / Lightroom 4
but now i need to go to 10.7 OSX to use LR 5
has anyone had success using 10.7 or above on these mac pros.?
holding out on this old soldier till the new units launch this fall! hope i can make it
i cant seem to find anyne in the threads who has worked this out.
thanks in advance!
Ben

I'm in the same boat. I have a 1,1 and LR5 won't run on 10.6.8. I'm upgrading to 10.7.5, which I hear isn't as stable as 10.6.8, but not awful (well, I should know this...I still have 10.7.5 on my 2011 MBP and it runs fine).
The lack of EFI64, while there are workarounds, is probably the thing that will push me to upgrade, and for a desktop, I won't be continuing with the Mac Pro series. I enjoy Apple's work on their laptops--they're built beautifully, and I got lucky owning a 1,1--the best built of the series, but I had bouts of frustration trying to upgrade it. I know I can get the same power with a self-built machine, despite the lack of thunderbolt...which isn't as useful for desktops given PCIe is enough.
But that's it. The Mac Pro 1,1 is starting to show its age. Natively 10.7.5 will be its last OS X that it can support. 7 years ain't bad for a desktop! If I can get to 10, that would be great, but I'm missing SATA III and other technologies.

Transmit Rate on my Mac Pro and MBP

Hi,
I have a early 09 MBP and an early 08 Mac Pro. I recently upgraded both from SL to ML. Both are running on the same wireless network, set up with anAirport express. I am experiencing really erratic wifi signals on my Mac Pro (it'll drop out w/i a few min. of connecting to a wifi), though my mbp stays on the network just fine.
I opened up system profiler and wrote down the following numbers
                         MBP                              Pro
Signal/ noise      -66 dBm / -86 dBm          -84 dBm / -85 dBm
Transmit rate     117                                   26
MCS Index          14                                   9
What does these number mean? do I need a new airport card for my pro?
Thanks
Angela

If you download and use OmniDiskSweeper, It will tell you what is using the disk space.
Allan

2 questions: validity of my machine's status as a 3.1 Mac Pro, and what PCIE cables for Radeon 4870?

Hello, I bought a used mac pro from a guy that said it was a 3.1. It runs great and when I go to "About this Mac" and then to "More info" and look at the hardware info, it says that it is indeed a 3,1. However, the serial number sticker on the back says it's a 2.8! Any insights into that? I'm very new to Mac Pro desktops and I just want to make sure I didn't get ripped off.
My second question. The machine came with the standard X2 quad 2.88 GHz processor, 8gb of Ram, and a Radeon 2200 graphics card. I bought an ATI Radeon HD 4870 from a guy on craigslist but he didn't have the power cables for it. He said it wasn't a big deal and after I did some research it looks like I need some PCIE power connectors. The card takes two, 6 pin power cables. My question is where do I plug them in on the logic board? Should it be a 6 pin plug in also meaning I want a 6pin to 6pin cable like this (http://www.newegg.com/Product/Product.aspx?Item=N82E16812200975&nm_mc=KNC-Google Adwords&cm_mmc=KNC-GoogleAdwords-_-pla-_-Internal+Power+Cables-_-N82E16812200975 &gclid=CMW8u4Po5LUCFcdDMgodx2AAyA).
So yeah, the simplest answer I'm looking for is what cables do i need to power my ATI Radeon 4870 in my Mac Pro? Another way to answer that I guess would be to explain to me the way my power supply works in my mac pro.
Thanks!
Mickey

That is an 8-pin. And I just posted Amazon link to 6-pin in another graphic card upgrade thread minutes ago.
And it had a ATI 2600XT. good thing you replaced it.
10.6.8 tends to run best but try - andkeep 10.8.x and see how it goes. Also more options later in graphic cards.
Call Apple and have them check the serial number and they can provide for small $20?fee the OEM DVDs it shipped with (10.5.x) and Apple Hardware Test. They can also sell 10.6.3 DVD
I would have looked for the ATI 5770, better support, the 4870 lacks some ML (Mountain Lion) support for OpenCL.
ATI Radeon 5770
http://store.apple.com/us/product/MC742ZM/A
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
How To Install and Remove Memory Mac Pro
https://support.apple.com/kb/HT4433
2008 Mac Pro Memory Arrangement
http://eshop.macsales.com/Customized_Pages/Framework.cfm?page=install_videos/mac pro/macpro_quicksheet.html
2x2GB FBDIMM DDR2 667MHz @ $31
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
Hardware Monitor
http://www.bresink.com/osx/HardwareMonitor.html
UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
PCI-e Power Aux Power cable
http://www.amazon.com/PCIe-Power-Cable-nVidia-Video/dp/B002UR1654/

Mac Pro and Dummy Terminals

Here's my situation: currently my household has 6 people in it and we all have PC's, but we want to switch to apple.
The problem is I would like to get the Mac Pro but cant afford 6 of them. I also cant have everyone share because that never seems to work.
I have an idea and want to see if its possible. I would like to set up a home network similar to an office. With one Mac Pro and 6 dummy terminals.
I was hoping then everyone could get the power of the mac pro without the cost of buying 6.
Is this possible?
What do i need to do?
What do i need to buy?
Do i buy 6 mac mini's as the terminals, or use older macs?
Can it be done with the Mac Pro or do i have to buy xserve?
Message was edited by: jonahmargolis

What you want is possible with the underlying BSD system that OS X is built on, but not with the actual client or server GUI and API's that make a mac a mac. It would be similar to the old timeshare systems that ran on mainframes and mini computers, where all processing was done on a single CPU in effect by virtual machines accessed by dumb terminals.
Buying six mac mini's and networking is the way to go, but each mini is its own CPU and is not dependant on any other machine for processing.

Mac pro and bluetooth/ m. mouse bt

hi!
i bought a new mac pro last week! it's my first apple computer and i'm so exciting.. but there's a problem..
i have the bt and airport module built in, now i have also the bt apple mouse and keyboard.. the keyboard is ok, but the mouse is slow and skip in the screen... i also used an alternative driver/software but the usability is the same.. now i called Apple phone service and they send my a new kit bt (mouse and keyboard)..
i read that many people have the same problem.. well, what can i do in order to fix the bt problem with my mouse wireless?
there's a pic's guide? help me! anyway can i add a dolgle bt?
thank's a lot guy!
sorry for my bad english

Very interesting. After reading your post I was reminded of some threads I looked over weeks ago and forgot about, relating to this very problem.
I unfortunately assumed that I would actually need to open up the case and play with the wires just to disable the internal BT module so that I could connect a BT module.
Then I noticed that a few people seemed to be saying that they connected a dongle without playing with any wires, and things got better.
So I tried it! And it works!
I just plugged my D-Link DBT120 ( http://www.dlink.com/products/?pid=34 ) into the back of the cinema display and the internal bluetooth seemed to instantly turn off and switch to the new dongle. Of course with that both the BT keyboard and MM disconnected and I needed to use the old wired MS mouse to get them connected again, but once they were they were at full speed!
The BT MM still isn't anywhere near as fast as the MS wired mouse but it's quite usable and many times faster than it was while using the internal BT module.
Here are a few of the other threads related to this problem:
http://discussions.apple.com/thread.jspa?messageID=4353470
http://discussions.apple.com/thread.jspa?messageID=3095257
http://discussions.apple.com/thread.jspa?threadID=633522
@ imax05 - I'd recommend getting a separate BT dongle. They're quite cheap and fix the problem. I know, it's annoying having payed for an internal BT module but...
Mac Pro - Two 3.0GHz Quad-Core Intel Xeon 5300 series Mac OS X (10.4.9)

Universal Audio Card in mac pro and logic together.

Hello, I am thinking on purchasing an Universal Audio Card and using it with a mac pro and logic studio.
Does anyone know if they have used or know about using a Universal Audio card (UAD-2 Nevana 32), or any other universal audio card?
Can you use this card with a mac pro and logic studio and does it have any latency issues? And can you use the Universal's mixor and logic's mixor at the same time, Or do you just use the plug ins on the UAD when using logic. Also it looks like it comes with one input on the card, so how do you plug in multiple guitars and bass and piano, or do you just run one input in and buy a input device for it (what would I need to buy for that?), Thanks so much.
Lou.

Universal's documentation says that it is compatible with Logic 7 and Logic 8. You might want to ask in the Logic forums about hands-on experiences. Universal also has their own forums where you'll probably be more likely to get useful information from experienced users:
http://www.studionu.com/uadforums/
Regards.

Wee Problem with Parallels Desktop and the Westmere Mac Pros

Just got my new Westmere 8-Core Mac Pro last Friday, and spent the last four days in agony.
I used Migration Assistant to transfer over my accounts from my old Mac Pro, but it crashed hard -- so hard that I had to reformat the hard drive and do a clean install of the system. So I decided to do a clean install of all of my programs as well, and the Westmere crashed on the Parallels Desktop installation. And, again, it crashed so hard that I had to reformat the hard drive and do a clean install of everything all over again.
Today, I read a review of the Westmere Mac Pros in Macworld (http://www.macworld.com/article/153704/2010/08/quad8_core_macpro_2010.html?lsrc=top2), and learned:
We ran into a problem running Parallels on the Westmere-based Mac Pros, so we could not complete the Speedmark 6 suite of tests. When booted into 64-bit mode (as the new Mac Pros do by default) the systems would crash with Parallels installed. Booting into 32-bit mode would allow the systems to start up, but we still couldn’t use Parallels. We eventually tried a complete wipe and reinstall from the Mac Pro’s systems disc and downloaded the very latest version of Parallels to eliminate any other potential problems, and had the same issue. Apple and Parallels are aware of the problem and assure me that Parallels is working diligently on a fix. The application worked just fine on the new quad-core Mac Pro with the Nehalem processor.
Hoped I saved somebody some time.

Hi akapod,
Looks like they may have the fix out.
Mac Pro (Mid 2010): Kernel panic when installing or restarting Parallels Desktop 5 for Mac
Please let me know if it's available and fixes it.
Thanks,
ivan

Mac Pro display flickers with a white screen and then display closes

Hi,
The display on my Mac Pro started showing a white screen and flickering.
So I tried formating and re-installing 10.4.10. I am able to complete the installation of first DVD without flickering. But when after the restart after installation using first DVD then the flickering resumes.
Any idea what is the issue and how we can solve this issue.
The AHT test shows this code 4 SNS/1/40000001:ICAC. According to
http://support.apple.com/kb/TS2081?viewlocale=en_US the code should have a trailing number - but my report does not have any number. Is this error code fine? If no, can some one tell me what is the error in the system?
Thanks,
Ed
Message was edited by: esg123

Same symptoms here. We tried AHT on a good Mac Pro with the video card from the bad mac, and got the 4 SNS/1/40000001:ICAC error. Looks like a bad video card.
Here's another thread discussing the problem: http://discussions.info.apple.com/thread.jspa?threadID=2071334
Dave

Dell 2407wfp and card reader and Mac Pro

Does the card read work when monitor is plugged into a MacPro?
I did not install any software but just plugged my 2407wfp into my Mac Pro using DVI port and it recognized the montior. I inserted a cf card into the monitor but nothing happend. Do I need to install any software for the usb ports and card readers to work on my Mac Pro?

It should do. What I think you've missed is to connect the USB uplink cable (a standard USB2 A to B) from the display to your MP.

Mac Pro and Airport Extreme Card

I have a new mac pro and installed the airport extreme card. I cannot see my network but the system tells me the card is on. Any suggestions? I can connect with a direct ethernet connection.

I bought a mac pro last year and went for the wireless option with it. You know the upgrade. Anyway it came as a seperate item and i had to install it myself. It doesn't look anything like the one pictured here, well it just doesn't have a cover like it. So anyway i can't pick up any outside networks and when i share the internet connection with it i have to put my psp right next to the case to get a profoundly amazing 12% signal, Any ideas?

Mac Pro 2008 and ATI Radeon HD 5770

According to many other threads in this forum the ATI Radeon HD 5770 graphics card is said to work fine with the Mac Pro 2008 (model no. 3,1) though the Apple Store lists the Mac Pro (Mid 2010) under system requirements. Well, before I’m going to upgrade my Mac against Apple’s will, I’m just curious to know if anyone has found out why Apple restricts the compatibility to Macs from mid 2010 on. Is there an issue that affects only a small number of machines? Or is there a software incompatibility popping up under rare circumstances? What is the reason for this? Why does Apple not grant downward compatibility?

Apple does marketing and doesn't do a bang-up job on writiing technical requirements on hardware upgrades and testing. It doesn't make sense, there is no reason for not just "works with 10.6.5 or later on ALL Mac Pro models."
something nice and clear and so avoids all the questions and discussion.
Radeon HD 5870 versus 5770
2008 has PCIe 2.0 so no lose of bandwidth.
And I guess you ignored the numerous comment section on the product page? where people said it works.
ATI Radeon HD 5770 MC742ZM A

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

I have a samsung s4 and i need help downloading the photos to my macpro, i have a samsung s4 and i need help downloading the photos to my Mac Pro

Similar Messages

Maybe you are looking for