I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sending data to Message borker.(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to save file in SAP fold
I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.
Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam
Similar Messages
-
I transferred my 3GS photos onto my new iphone 5 ust to look at them. Now I am running out of storage. I need to save them to a computer so I can delete them from my phone. How can I do this?
Hey bizteacher,
Thanks for the question. Do you still have access to the iPhone 3GS? If so, follow these steps:
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
You could also follow these steps on your new iPhone 5, so long as the pictures are stored in your Camera Roll (as opposed to being synced to your phone).
Thanks,
Matt M. -
I don't have owner's phone number, how to get previous owner's Apple ID(email address) and send him a email let him remove the device from the account
There is no way for anyone on this forum to assist you. Apple will also not assist you. If you purchased the device thru ebay, file a claim. If you purchased it some other way, I'm sorry. there is nothing anyone can do to help you.
-
BPM Syncron Sender Exception Processing , Mapping and Sending To Asyncronus
Hi!
Im forming out a scenario in BPM where I should get the content of the syncron sending's exception and after all I would like to map the exception message content and send asyncronously. How should I grab and process the exception message in the exception branch of the block where the syncron send step located?
PI version 7.1
Regards A. Héger
Edited by: Andras Heger on Feb 2, 2010 8:51 PMThe question is resolved...
A Héger -
i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left? -
I have a ipod that had photos synchronised to an old computer that has sinced crashed and the data can not be recovered. How do I recover the photos stored on the IPOD to my new computer?
You'll likely need the assistance of some sort of 3rd party software. Keep in mind that the photos on your iPod are only scaled down thumbnail versions of the originals. So even if you do manage to copy them backt to your PC, they will not be in their full original resolution.
Do a simple Google search for "copy photos from ipod" and you should get a number of hits that can assist you.
B-rock -
N:1 Mapping and Matching Lines of Message 1 to Message 2
Hi Everyone,
I have an n:1 mapping and I need to match up the lines of message 1 to the lines of message 2 to map the target. For example:
Source 1
Key1 = A, Key2 = A, Key3 = A, Field1 = Red
Key1 = A, Key2 = B, Key3 = B, Field1 = Blue
Source 2
Key1 = A, Key2 = A, Key3 = A, Field1 = Wagon
Key1 = A, Key2 = B, Key3 = B, Field1 = Sky
Target:
Key1 = A, Key2 = A, Key3 = A, Field1 = Red Wagon
Key1 = A, Key2 = B, Key3 = B, Field1 = Blue Sky
I think that this is possible in a user defined function that basically loops over the Source 2 for each value in Source 1, and I even think I saw a solution to this common problem posted before, but I have searched and can not find it. Any help is greatly appreciated!
Thanks
PeterHi Peter,
From the example that you have given, mapping between the two source messages has been
done only for the fields("Field1"). Infact, you are combining the values of the fields
in the both the source messages-to show in the target message.
I think this can be done by creating one source message type which stores both the source
messages (n:1) and then you can map both the field1s of the source messages to field1 of target
message <b>by using the concat function</b>.
Hope this was helpful.
Regards
Sushumna -
I have an old iMac. Not sure of the operating system but the install disks say OS X. The computer will not boot anymore and all I keep getting is to restart and when I do I keep getting the same message. I do have the install disks but I can't get the computer to install, or for that matter, read the disks. I would like to rebuild the computer from these disks so that I can continue to use this computer. There is no need to save anything on the computer as I backed it up months ago. Any suggestions as to how I can save this computer and not have to recycle it?
Really need to know what version of OS X it is currently running, and what version you are trying to install.
-
APEX as frontend for Oracle Maps and Mapviewer data
Just to let you know:
I did some work with Oracle Application Express (APEX) integrating Oracle Maps and Mapviewer functionality
and published it occasionly it in my Oracle Application Express (German) BLOG. : http://htmldb-de.blogspot.com/ -
Guess you will understand from the screens, what all is possible and beyond...
An integration (application) of APEX and Mapquest for Routeplanning done in APEX can be seen (and downloaded) as well.
Feel free to have a look !
Bernhard
http://htmldb-de.blogspot.com/Just to let you know:
I did some work with Oracle Application Express (APEX) integrating Oracle Maps and Mapviewer functionality
and published it occasionly it in my Oracle Application Express (German) BLOG. : http://htmldb-de.blogspot.com/ -
Guess you will understand from the screens, what all is possible and beyond...
An integration (application) of APEX and Mapquest for Routeplanning done in APEX can be seen (and downloaded) as well.
Feel free to have a look !
Bernhard
http://htmldb-de.blogspot.com/ -
What do I need to save files as to transfer from AppleWorks 5 to iWork '06?
I have plenty of AppleWorks word processor documents and spreadsheets that I'm trying to transfer over to my new computer (I've been using Mac OS 9 all this time) and iWork doesn't seem to be able to read any of the documents. What do I need to save them as? And what does Mac OS X use for spreadsheets? It seems like iWork is just for Power Point and Word type documents, then again I have very little experience with all this new stuff so far. Thanks for the help.
Pages, part of iWork, is only able to open AppleWorks 6 word processing documents. It is not able to open any other AppleWorks 6 file types or any type of AppleWorks 5 or ClarisWorks documents. Keynote (the other application in iWork) is able to open AppleWorks 6 presentation documents. I don't know for sure, but, since presentation is a type of AppleWorks document new to AppleWorks 6, it would seem logical that it can't open AppleWorks 5 slide shows. None of this has anything to do with using AppleWorks 6 in OS 9 or OS X. If you don't have AppleWorks 6, you will have to buy it to use to "up convert" your AppleWorks 5 documents. For inexpensive options to buy AppleWorks 6, try eBay and do a search for "AppleWorks" or "Apple Works" (some people put a "space" in the name). Or you may purchase it from almost any retailer that sells Apple software, including the online Apple Store.
Peggy -
Does /sapmnt need in cluster file system(SAP ECC 6.0 with oracle RAC)
We are going to be installing SAP with Oracle 10.2.0.4 RAC on Linux SuSE 10 and OCFS2. The Oracle RAC documentation states:
You must store the following components in the cluster file system when you use RAC
in the SAP environment:
- Oracle Clusterware (CRS) Home
- Oracle RDBMS Home
- SAP Home (also /sapmnt)
- Voting Disks
- OCR
- Database
What I want to ask is if I really need put SAP Home(also /sapmnt) on cluster file system? I will build a two nodes oracel 10g RAC and I also have another two nodes to install SAP CI and DI. My orginial think is sapmnt is a NFS share, and mount to all four nodes(RAC node and CI/DI), and all oracle stuff was on OCFS2(only two rac nodes are OCFS), anybody can tell me if SAP Home(also /sapmnt) can be NFS mount not OCFS2, thanks.
Best regards,
PeterHi Peter,
I don't think you need to keep /sapmnt in ocfs2 . Reason any file system need to be in cluster is,in RAC environment, data stored in the cache of one Oracle instance to be accessed by any other instance by transferring it across the private network and preserves data integrity and cache coherency by transmitting locking and other synchronization information across cluster nodes.
AS this applies to redo files, datafiles and control files only , you should be fine with nfs mount of /sapmnt sharing across and not having ocfs2.
-SV -
I have downloaded I-Cloud and the new ios program. Where do my text go through now if they don't show up on my bill in the data usage section? When I get a text from friends sometime their e-mail address shows at the top of the message instead of their name like it use to. Then when I reply it gets returned. They tell me they are sending it through the normal text like they use to.
You are probably right - I don't have my iPad with me and was confusing myself. But on the iPad it is receive at email addresses only.
Sending to the phone number will mean ONLY your iPhone gets the message. If you want it to go to ALL devices, then you should have them send to the email address associated with the AppleID you used to set up iMessage originally. Also set that email address up as your caller id on the iPhone so as you send out messages, people will reply to that and both your devices should get them.
Although Apple's notes indicate you should be able to do it - http://support.apple.com/kb/TS2755
what if you just type in a 10-digit phone number on the iPad instead of an email?
(I originally did all this with iOS 5.0, and I know then the number did not work on an iPad, but maybe with iOS 5 updates, it does now?) -
The majority of my music 1300 of my 1500 songs are apparently stored in the cloud. therefore when I am out of wifi range, the majority of my music is grayed out.
I am going to France next week and I want to be able to listen to my music offline. Basically, I want to change my phone into an ipod. How do I do this?
John ParisEither you have to download each song from iCloud or iTunes store, or sync you phone with the iTunes library on your computer
-
I have had this problem with version 4.0 and keep trying a newer version but still have the same problem. I never had this problem with version 3.8. Should I go back to this version?
I do not have this problem using Google Chrome.
[email protected]Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
-
SAP R3 custom extract - trigger XI to map and send to Mainframe
Hello, I'm looking for the best way to occasionaly send table data (as decided by business user via custom transaction) from R3 business system to XI and eventually on to Mainframe. I'm OK with this latter portion of XI mapping, JMS / MQ config, and then on to Mainframe.
Here is my question. Our ABAP developer can create a BAPI to lookup the Ztable extract data for us in the R3 system. In this way, I would like to have it pushed from SAP rather than setting a polling interval because the extract will happen on a irregular basis. But to my understanding a BAPI is to be called / pulled rather than pushed. How can we best accomplish a push from R3? We are accustomed to using IDOCS but in this case it is completely custom.
I appreciate your experiences on what is the best method to use in this scenario.
Thanks in advance,
AaronHi, thank you for the ideas.
Our ABAP programmer is willing to try it using the RFC approach but we are unclear on how to do this. I would be grateful for some more information such as:
Does anyone have a simple example?
When we use the RFC Channel as a Sender, are the RFC Server Parameters pertaining to the ERP system or the XI system?
How does the ABAP program on ERP system actually send data to XI?
Do we need to set up any special ports to do this?
Thank you for your help,
Aaron
Maybe you are looking for
-
How to import jar & exp file into the eclipse 3.1 + jcop
hi, I am new to the javacard technology. I have implementing applet by using eclipse 3.1 + jcop plugin. recentlly, i got jar and exp file from someone. and I have to import given two files in the my applet. Q1. but i don't know how to use(import) two
-
Ipod dead (for no apparant reason)
This is very strange. I was sitting in a bus today listening to music when I was interupted and, so, turned off my Ipod. When I reached to turn it back on again (this was about a 5 minute interval) the Ipod wouldn't turn on. It was as if it were dead
-
Hi, I wish to write a program that generates and create the code for me. One example could be I see a standard SAP Module which I like, but want to change it slightly. I enter the function module in to a program click execute it it generate an identi
-
After enable "Shareable for clustering" on a SAN device and install y configure a new cluster, the 2 nss volumes on that SAN device did not mount on next reboot. I got the following error messages on /var/log/messages: Aug 2 20:00:03 bceqlnx1 kernel:
-
Approval link throws 404 error
Hi, I am running EP6 SP2 patch 5, CM patch 5. I have CM setup to show news items anonymously. When one clicks on the approval email that is sent with the link to the item it throws 404 error saying that the document is not available. The item is t