I HAVE A SERIEUSE PROBLEME WITH N70
hi my brothers i have N70 and yesterday i has upload a v 5.0638.3.0.1 to my phone and in the final of upload all is normaly and the phone started normaly but after restare a phone the language has changed and i trought to change it but it can't change this is a chinees or i don't know ? i tray to format it but doesn't change so please helps me im sorry for my english because i live in algerie thanks a lot
Enter *#7370# into phone. Phone will format and restart, you will then be able to enter which country (And therefore language) you wish to use.
This will erase all data on your phone.
Useful links: Phone firmware update | Nokia support site
Similar Messages
-
I have a serieuse probleme with a luanguages of N7...
hi my brothers i have N70 and yesterday i has upload a v 5.0638.3.0.1 to my phone and in the final of upload all is normaly and the phone started normaly but after restare a phone the language has changed and i trought to change it but it can't change this is a chinees or i don't know ? i tray to format it but doesn't change so please helps me im sorry for my english because i live in algerie thanks a lot
Enter *#7370# into phone. Phone will format and restart, you will then be able to enter which country (And therefore language) you wish to use.
This will erase all data on your phone.
Useful links: Phone firmware update | Nokia support site -
Recently i have been having problems with my N70 if i try to send a message i get a Error message come up ' Sending failed' and when i click on info it says : General: Memory Full. Close some applications and try again. the thing is i have plenty of space on my memory card and my fone memory.
Before this problem occured when sending quiet a few messages some of them didnt send came up with resend on my outbox so when i restarted my fone it sent i kept doing that for a few weeks... now even if i restart it doesnt send messages what seems to be the problem?? i have had this problem before on a previous nokia model 6600
I tried reinstallin the phone but Nokia Software update doesnt work on vista so i need you Help please!
For my nokia 6630 i have the problem where for some odd reason my phone doesnt reset the new messages once i read it e.g. if a new message came it would say 1 new message but after i read it that one new message stays... currently it says i got 87 new messages even though i have read them. I have another problem where my phone doesn't beep or vibrate or ring when i get a message. But if some calls me it does.
again can't use nokia software update doesnt work for vista please help!it's pretty cool! it works (a little bit)
try that:
<key>AllDayEventFormat</key>
<string>AllDay> night</string>
<key>Birthday</key>
<true/>
<key>Charset</key>
<string>UTF-8</string>
<key>DueDate</key>
what will happen on your n70:
all birthday entries, all day events (notes and public holiday) will beginn and end at highnoon (12:00am)
just real all day events beginn at highnoon and end at 23:59. not perfect, but much better than before.
for all who don't know which file to edit:
/Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/P lugIns/PhoneFamilySync.phoneplugin/Contents/Ressources/Metaclasses.plist
the line nummbers are 873 and following.
be sure to backup this file before edit
greetings horst -
Problems with N70
Helo! its been six months now i purchased N70, im facing two irritating problems
1: whenever i prees *100# (to check balance) my N70 RESTARTS
2: i cannot switch on my cell if memory card is installed in the phone.
So i wana now is this a common problem or m d only guy who is facing this?
Plz reply
thx in advance.hi there
try this remove ur mmc and give a hard reset b pressing the following keys.*#7370#.
please note :ALL DATA WILL BE LOST.
and then format ur mmc using a mmc reader.this should solve the issue and check in the software version by pressing the following keys *#0000#.if it is older than 5.0737.3.0.1 then u can get it upgraded.cheers.
tongue is too confused on what to speak -
After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!
Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration... -
I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.
I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.
-
I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
I have been having problems with my iPod touch and my WRT...
I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
Message Edited by AlliW on 10-02-2008 02:06 PMI had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
1. Settings - wifi - linksys
2. Erase your DNS settings & input same numbers as in router
Settings.
3. Http proxy should be
in off position.
4. Close out & open safari you should now have a wireless
connection. -
I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?
Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP -
So how do I fix this? How do I get this to go away? It's prompting me for a password that I haven't ever set up!
I have the same problem with three pop-up prompts:
(1) com.apple.iCloudHelper wants to use the "login" keychain. Please enter the keychain password.
(2) CalendarAgent wants to use the "login" keychain. Please enter the keychain password.
(3) AddressBookSourceSync wants to use the "login" keychain. Please enter the keychain password.
I can enter my login password and the prompt goes away for a little while, but eventually returns. Or I can click on "Cancel" many multiple times and it goes away for a little while, but returns again.
I want a solution too and hope this additional information will help. -
After a fairly recent update, I began having the option to paste text disappear, I've had backspace cause the browser to go back to the previous page while in a text box, and other issues which are apparently a matter of Firefox not recognizing the fact that I am typing in a text box.
After the last update, suddenly YouTube video page URL links no longer translate into links containing the title of the video, and also things like the use of bookend asterisks in order to have text appear in bold typeface no longer work.i have the same problem with the above..firefox is running too slow with the games in facebook..but it runs good when browsing my updates, msgs, photos...firefox is totally opposite of IE..IE is faster with the games and slow while browsing..i love to use mozila but when i do games it really pisses me off...hope you could help me..
-
Hi , I have an iPhone 5S and I have got a problem with the app store : iI can't update my apps , it is asking me to change frim the UK store to go to the french one , but i have already changed it and I am in the French one !! Help !
Have you tried signing out of your iTunes & App Store on your device and then back in again - Settings>iTunes & App Store, click on Apple ID, then on Sign Out. Then sign in again and see if it accepts the password.
If that doesn't resolve the issue, try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Slide to Unlock screen will display. See if the problem is resolved.
Cheers,
GB -
Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.
Try Here > http://pondini.org/TM/Time_Capsule.html
Perhaps P 2 > Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109). -
Helloo! I have super big problem with my Air.
Helloo! I have super big problem with my Air,10.8.5 ,it asks every 10 sec to make some changes and asks me for password all the time!! I cant acces my documesnt,pics,music,NOTHING at all! Finder is not working,i cant open any folder,icons are missing also,i cant open any of them,mozzila,chrome..im really going crazy.. i updated tonight my phone on new IOS 7 through my comp,cant be that i messed up everything because of that..this comp.is like 10 days old.
btw. i created new user,and everything is working ok.Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar.
Maybe you are looking for
-
Hi all, I am using BPM 10.3.1. I configured BPM enterprise and try to start process engine from Process Admin console. but i can't able to start it. I found the following error. [HTTP:101216]Servlet: "engineStartup" failed to preload on startup in We
-
Hi, I have a table which contains XML in a clob. The xml looks something like this: <form> <formfield> <fieldname>FieldA</fieldname> <fieldvalue>aaaaa</fieldvalue> </formfield> <formfield> <fieldname>Field
-
Getting a new macbook, questions about transferring files with Time Machine
I now plan to switch computers to one of the new Macbook pros. Since I now use Time Machine, I'm planning to just upload the backup to the new computer when I get it. the backups are able to be transferred to a new one for an upgrade right? Also, I h
-
Iphone shuts down when making a call
Please help my iphone shuts down when making a call restored and set to new phone but still shuts down after 2 to 3 mins HELP
-
Hi all, Is there a way of naming the axes titles of an excel plot created using the Report Generation Toolkit? There does not seem to be such an option in the excel specific functions of the toolkit... Could it be done through activeX?? I tried to fo