I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do
I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do
The little lock has nothing to do with speaker volume. It means you have locked the rotation on your iPhone.
Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls?
Similar Messages
-
I have two ipods and i want to be able to seperate them where my oldest childs stuff wont be on my smallest childs stuff what should i do
Each ipod will only sync what you select to sync
-
I've bought headphones for iphone 4g and want to use them in my ipod 4g. When i want to use pilot it don"t work. What should i do ?
If you have an Apple store nearby you can make an appointment at their Genius Bar.
Apple Retail Store - Genius Bar
You can also try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device -
appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?
ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped -
my ipod touch has on activation required with a lock at the top of the screen and my computer is not able to connect
Mine too, and mine was due to liquid damange (took it outside with snow).
-
Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.
Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me? The volumn is turned up but I can't seem to resolve the issue? Thanks
Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
I upgraded the software on my iphone 4 and now it's downloading every email message from all my accounts (all previously read). 200 at a time. Manual delete is a problem since there are 3500. Suggestions?
Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice! -
When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?
There is no Info tab in Mavericks
if you use OS X v.10.8.5 or earlier. If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad -
The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi. How can I fix this problem?
Follow the steps in the article below to try and resolve the issue:
iOS: Wi-Fi settings grayed out or dim
If after all the steps the issue remains I'd suggest to book an appointment at an Apple Retail Store to have your iPhone evaluated or contact AppleCare for assistance.
Hope this helps -
I tried to update my iphone through my itunes and recieved an error message. The phone then became frozen on the conect to itunes screen and I can not use the phone. I tried to reconect to itunes but it does not recoginze my phone it just stays frozen.
Try recovery mode as described here. You may have to try to get into recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808 -
hi there
Is the phone new? If so, have you peeled off the protective plastic from the face of the phone?
-
Please help i don't want to lose all my info and pics from the last week for the 4th time.
If the computer does not recognize it and you've forgotten the passcode, there is no other option.
If you've been using the device as designed and syncing regularly, only the data since the last backup will be lost. -
I only get the top half of my screen displayed when in Safari, not sure how ths has hapened or how to resolve it, any ideas?
It's not at the bottom of the screen but the Safari pane/window. Its very small. See below.
Ciao. -
How do I stop the menu from showing up when I hover to the top of a full screen app?
I am running Parallels in full-screen on Lion and when I move the cursor towards the top of the full screen app the menu pops up. How do I stop the menu from popping up? I keep hitting an icon on the menu bar that pulls it out of full screen mode and it's getting very annoying. Thanks.
Use VMware Fusion? But seriously, Fusion does what you want. It just puts a mini VM control menu at the top when running full screen (and that's configurable, too), so the main menu bar doesn't appear at all. Which means that it's up to Parallels to handle this. Are you running Parallels 7, which is designed for Lion? If you are and Parallels still doesn't offer something similar, you need to contact Parallels.
Maybe you are looking for
-
How to use a bind variable in a table-validated flexfield
Hi, I want to prepare a table-validated descriptive flexfield, which uses as source a select statement. So, in the form "Validation table information" I use as table name the statement: (SELECT my_procedure('test_value') FROM DUAL) Up to here it work
-
Verizon Customer Service is Terrible. How do I freaking talk to a real human?
I am signed up for auto-renew, but EVERY month, it fails to renew and my phone stops working and I need to contact Verizon to get it working again. ***? Right now, my phone DOES not work because my balance is 0. When I log in and check Auto-Renew thi
-
Help on the ADOC history table in SBO 2007
Hi I am interested in writing a report on changes to sales orders so I thought the ADOC and ADO1 tables would be a good start However if I place a sales order in my system I can't see the order in the ADOC table Is there some setting I need in SAP so
-
Iphoto wont let me edit info
-
View Object / setWhereClauseParameters()
Hi, I am using BC4J in a servlet to access a database. I have a view that uses "?" style parameters. I am successfully setting the parameters and executing the query. My problem occurs the second time I set the parameters and execute the query. Here