I have a sticky cursor on my Mac Air and I can't seem to shake it.
All of a sudden I got a sticky cursor. No fluids no accidents nothing happend to think this might be the problem.
Never changed anything it just happened.
Can any one tell me how to get it back to normal again?
Reboot not working for it, changing everything on the trackpad prefs won't help either.
Thanks for the reply and did try that already, I even tried de-selecting everything but it stays the same.
It selects everything, picks up everything. And on websites it selects text and so on while I don't want it.
After rebooting it seems gone, for a while but then it starts it again.
Mac Air is not overheating, and I haven't spilled anything on it.
Tried cleaning the trackpad and thought it helped, but it didn't
Similar Messages
-
I have 2 email accounts on an IPhone 5 and can't seem to change the sound for my primary email account.
Try going to Settings>Notifications>Mail, tap your primary account, then tap New Mail Sound and set as desired.
-
Does Microsoft word and excel come automatically with a new Mac Pro 13 inch laptop?
yes you have to buy same...., but you dont buy Microsoft products from the APP store, its a Microsoft product
Microsoft Office for Mac | Office For Mac
www.microsoft.com/mac
There is a FREE version nearly identical , many people love and use it
OPEN OFFICE
http://www.openoffice.org/ -
I Have tried everything and it still won't let me open anything in Safari. I have reset the Mac and router. It's just not working.
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
If that's not what you see, post the contents of the window. -
I downloaded some games from Itunes and I can't find them to play...help???
If they are iPad or iPhone iOS5 games they won't play on your MBA. It's the wrong operating system.
-
I already have adobe digital editions on my mac pc and download books from the library to my android e-reader. Can I use the same digital editions on my ipad air, or do I need to load a different one onto my ipad?
Try following forum:
Adobe Digital Editions -
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues. -
I have an mac air and an iMac 5k - pages runs on both. I use pages on my air and save all my documents to iCloud drive. I can see the documents on my iMac but some won't open in pages which is bizarre? They will open if I change it to open with preview but then all I can do is read it - I can't add to the document - All I want is to be able to see all my documents on all my devices and to be able to have them sync so I can add to the documents from any of my devices. I also have an iPhone 6 and an iPadair2 but I would be happy just to have the iMac and macair sync for starters. I have folders within folders in my documents,. The folders which contain pdf's and individual files open OK . The one I am having difficulty with is the file which I use for ongoing correspondence - in other words it is quite long - I keep adding to it ( by copying letters in and letters out so I can see a sequential history of what has been going on by scrolling down ) in date order so that it could be 1 - 100 pages long - but I don't think the size is a problem. I don't understand why some folders can open and others not . Has anyone any suggestions please. I have been trying to get this to work for months since iCloud drive came in. It has got much better but it is still not good enough - or maybe it's me?
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
I have a desktop pc with itunes. I just purchased a Mac Air book. Can I sync my devices, iphone, ipod, ipad, to both computers. Or do I have to pick one? I would like to have itunes on my mac, but i am afraid I will run out of hard disk space. Do I need to set up a seperate account on my Mac so I can load some music on it if I plan to keep my devices synced to my PC? Would it be possible to sync only my Iphone to my Mac?
To get that much storage, you need to look to professional online services. Pro-level hosting accounts may offer you that much (well, many will offer as much storage as you are prepared to pay for), or Amazon professional cloud services. You could also store the files on a home machine and pay for a professional hosting service so you could stream them over your own account (assuming your ISP connection and agreement allows for the bandwidth used). You would still need to deal with the issue of finding an app for the iPad that supported avi streaming.
-
Question: I am new to LR and have it set up on a Mac desktop and laptop. On the laptop, the Basic function under Develop simply disappeared. I am lost. Help.
It's a common issue. The Basic panel is merely hidden.
Hiding/unhiding panels is actually a feature of Lightroom but it is unintuitive - few people know it exists - so most newcomers are thrown when a panel somehow gets hidden.
Right-click anywhere in the right hand side panel area and a context menu will appear.
Click the Basic option to make the Basic panel re-appear. -
How do you agree to the latest iCloud Terms of Service if you don't have an iOS device only a Mac computer and an Apple TV with an iCloud account?
Part 2
Thanks for the feedback Skhorchid. Glad it worked for you too.
A bit later I discovered that Photo Stream was not working on my Windows 7 PC either. If I opened the iCloud control panel and put a check in the box to turn on Photo Stream, and then closed and reopened the control panel, the check mark was gone again. Also, nothing happened when I clicked on the options button beside the Photo Stream check box. I already had version 2 of the iCloud control panel so I could not upgrade further.
I ended up uninstalling the iCloud control panel, rebooting, downloading a fresh copy from Apple, and reinstalling it. This worked and I now have photo stream working on my Windows 7 system as well. -
I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have airprot utility app downloaded on my IPAD - it shows the modem and the internet no connected?
Do you mean an Airport Extreme Base Station connected to a Comcast Modem?
-
The pc that I used to download CD music to into my itunes library was stolen and I had no backup. I have all my itunes music on my iphone and ipod. can i have music from music from my iphone or ipod transferred to my mac computer through itunes?
I have a similar problem. I recieved an IPAD for my birthday, and my daughter updated my itunes library so i can use it with the ipad...and somehow all my songs (unpurchased from itunes, and downloaded from a large collection of CDs) ...and play lists were deleted. I still have them on my old ipod, and wonder how to get them back onto my computer so I can redistribute some of them to the ipad. I must be getting too old for this tech stuff, it gets less user friendly every year.
-
I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, outlook won't work out of office, is there any way I can reset the settings in order to be able to use outlook every where?
I can see my folders by clicking the X next to my name on the Inbox Folder. So I have my folders now, just cannot see them in the left colum or see multiple windows on Outlook. At this point, I can use the folders, just with limited functionality. Thanks -Gina
-
I have built sites on my imac, mac mini and MBA all in iweb09
i have built sites on my imac, mac mini and MBA all in iweb09 is there anyway to get them all on the same machine ? (i use mobile me)
Here's what worked for me,
I have two sites, one I mad on my macbook and one I made on my iMac.
First go into the "Library" Folder. In there you will find a folder labeled application support.
Go into that folder and you will find another call iWeb. Your site is in there.
So I took the file for the site out of the iWeb folder on my macbook, and copied it to my
iMac.
I keep them separately. If i put the file from my Macbook into the iWeb folder on my iMac, it would replace the file that is already there. When you start iWeb it will automatically open from that folder.
SO to keep them separate and organized, and to open the one you want there is a little trick.
First copy them all to the machine you want them on.
Take all your site's files and keep them in their own folders in the location you choose.
Make sure that on the machine you are using there is nothing in the iWeb folder native to that machine. Just move that file to another location where you wont lose it.
Now, start iWeb. When you do, iWeb will prompt you to either create a new site or allow you to choose one from a location of your choice. Tada! That is when you can choose whichever site you want to work on from the location where you are keeping them.
Good luck.
What is your site by the way?
mine are www.kloran.com and www.myenglishimages.com
Maybe you are looking for
-
I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks
-
Passing optional parameter to subreport
Hi, I am having a CR 2008 report based on BW query. The query has optional parameter (the value can be set to NULL). When I try to use this report as subreport in my main report, I am unable to pass Null(equivalent to set to NULL) to my subreport u
-
Want to lock video to audio, NOT audio to video--I'm making a music video
Hi I'm making a music video--one long audio clip which I'm cutting video to. I've got Pogue's book and it explains how to pushpin audio to video, but the reverse doesn't seem to work. I've got one long audio clip and I want to lock video segments to
-
Why does Firefox 33.1.1 require a User Account Control dialog before loading?
I am unable to stop FF from requiring the User Account Control dialog box before it will load. I uninstalled and reinstalled a clean copy, which worked the first time, and then re-established the UAC dialog on subsequent starts. This is incredibly an
-
FCPX 10.0.3 "instant edit" problem with OLD MBP and iMac
The setting ~15Gb of footage from 5D Mark 2 (with half the bitrate through Magic Lantern) ~Short editing project. The problem In the beginning, I used my early 08 MBP I tried importing the footage from CF to an event on my USB drive (I don't have a F