I have a strange 3g data problem.

I have a strange 3g data problem. At home I have zero 3G connectivity even though all bars are showing and says "3G" and wifi is "Off" ... unless I am on the phone and then magically the 3G data connection works perfectly!! Does anyone have any idea what is happening? Also when I bring my phone to my dad's or my friends house the problem disappears!! Is this a hardware or a AT&T network problem? os is 4.3.3
Also called ATT and they said there was no problem with the network and that it was a hardware issue. Also restored the phone several times but the problem did not go away.

OK, no trouble shooting. The first thing I'd attempt is restarting in Safe Mode. If you still don't have luck try doing both a SMC and PRAM reset, it wouldn't hurt to do the SMC reset a couple of times. If still no luck let us know.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

I have a strange second display problem.

I have a late 2007 20"iMac with a Dell UltraSharp 18" second display. I am running Snow Leopard with all updates.
This setup has been working great for some 3 1/2 years up to about two weeks ago. Suddenly it is like the left 20% of my second display is unresponsive to the mouse, display is displaying everything OK and the muse pointer can move there, but the click is not doing anything. For example, if I put a Safari window on this screen and click of any of the links in this area nothing happens, however if I move the whole Safari window so the left side is 20% or more from the left edge of the display the same links are just fine.
Anybody ever seen this and know how to fix it?
Thanks, Bjarne

OK, no trouble shooting. The first thing I'd attempt is restarting in Safe Mode. If you still don't have luck try doing both a SMC and PRAM reset, it wouldn't hurt to do the SMC reset a couple of times. If still no luck let us know.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Interpreting error message; insight into data problems?

I own a 8310 on AT&T running OS 4.5.011. I have been having intermittent data problems that have gotten worse over the last week; e.g., the connection box autonomously becomes unchecked, the browser cannot find a connection, data randomly goes form GSM to edge and back, Vlingo cannot find its server.
AT&T Service suggested a "Master Reset" and I have backed up my data with BB Desktop Mgr. as a first step. I got the following error message:
"Uncaught Exception:Application net_rim_bb_app(53) is not responding; process terminated"
Please help me 1) translate and 2) does that suggest a source of my problems?
Regards
Rob

You need to enclose carData[0],carData[1] etc in single quotes, if they are String(s). Otherwise you can use PreparedStatement.
PreparedStatement ps = con.prepareStatement("Insert into car values(22 questions marks)");
ps.setInt(1,temp);
for(int i=0;i<21;i++) ps.setString(i+2,carData[ i ]);
int count=ps.executeUpdate();
Sudha

Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

I have a related but different problem... I prefer that the photos/events on my iPhone and iPad be in "date created" order. Does anyone know if this is possible? Apple...please give us some options.

I have a related but different problem... I prefer that the photos/events on my iPhone and iPad be in "date created" order. Does anyone know if this is possible? Apple...please give us some options!!!

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

I iPad 3 fails to recognize cellular data In a number of locations Displays "searching and No Service" I have narrowed this to device problem. What can I do?

i iPad 3 fails to recognize cellular data In a number of locations Displays "searching and No Service" I have narrowed this to device problem. What can I do?

Hello there, OSOSANYA.
The following Knowledge Base article provides a great checklist of steps and additional recommendations for troubleshooting issues with cellular connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Follow these steps for help troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Make sure that your software is up to date:
Check for a Carrier Settings Update: Tap Settings > General > About.
Check for an iOS Software Update: Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet.

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

The specifications define an operating range up to 35 degrees.

Strange audi sync problem & different, stranger video sync issu in sequence

I have two strange occurances with one particular set of media that was downloaded from the same original source mini-dv (recording in dvcam) tape. I have not found the same issue on any other footage.
1) when the media is imported into FCP, the audio is out of sync. it is slightly out at the beginning and then gets progressively worse.
2) when this footage is used in a sequence, the video that show in the sequence is not the same as the video that is exported when this sequence is exported as QT movie (or any other export option) Like the audio the video out of sync gets progressively worse.
- The original media is perfectly in sync looking at the digitized source ie: in Quicktime. There is no audio out of sync problem.
- the only difference I could see in the file was that this media is 3.5mb data rate whereas all the others are 3.6mb.
- other tapes from the same camera do not have a problem
- I do all my downloading from a firewire deck and not from the camera
- I upgraded from 6.0.1 to 6.0.4 (as did the QT 7.5 upgrade also) to see if that fixed the problem but to no avail.
Very perplexing. I managed to work around this problem in a sequence whos deadline was looming by manually slipping the footage in the sequence the required number of frames. This is where it also gets odd. I was able to do this by
- double click the clip in the sequence which then loaded that into the viewer.
- position the playhead at the beginning of the clip
- from the canvas select the go to position in master clip option which then loaded the masterclip into the viewer. the position in the masterclip was always the correct frame (ie the frame I expected to see as per my edit). The frame showing in the canvas was also the correct frame (but this would not be the case when exported)
- the next thing i did was to use the slip tool, as soon as i held the slip tool over the sequence clip, the frame in the canvas would be the wrong frame (the frame i would see when I exported).
- then i would just carefully slip the sequence clip back to the matching correct frame. So watching in the viewer, I would align the frame that showed in the viewer to the frame in the canvas.
When done the frame showing in my sequence would be a completely different frame but when exported, the frame that I expected to see would be the exported frame.
I could find no logic to the amount I needed to slip each time (I am sure there is logic but I couldnt figure out what that was). the clip at the end of the footage needed to be slipped -10:09, and this got progressively smaller to the clip at the beginning of footage needing to be slipped -:16
Hopefully that wasnt too confusing.

btw, i have tried recapturing the footage and i have offlined it, copied it to another location and onlined it in the new location to no avail. still have the sync and video in sequence issues.

Date problem with timezones

Hello
I have very strange problem, i have two computers
1.client computer - on this machine timzone is set to AZST
2.server computer - on this machine timezone is set to GMT+4
location are set to United States , both machines
so my swing application calls ejb2 method from client machine to server and passes date which is 31/08/2011(Wed Aug 31 00:00:00 AZST 2011)
but server logs it as 30/08/2011(Tue Aug 30 23:00:00 GMT+04:00 2011), i pass it by Date object , so my question is would it be better/helpful if i try to pass with long value and construct date on server side? or how is teqnique at this situation?

The Date essentially IS the long value, it just has some (mostly deprecated) methods which allow you to treat that long value as a Date. So passing a long value doesn't fix the problem.
What we did when we had that problem was to pass a Date and a Timezone; the Timezone we passed was the default time zone for the client. On the server side we formatted the date using the timezone passed from the client, not using the server's default time zone.

Time Capsule writing data problem

Hi,
I have a strange problem with my Time Capsule. I can access all the backups and the data I have stored, and I can write small files (<1MB)in it, but when I try to write a larger file (>1MB) it gives me the following error:
"The operation can't be completed because an unexpected error ocurred (error code -50)."
Any idea what is the problem and how can it be fixed?
Thanks!
Jordi

If you have a Gen3 TC.. A1355 (check the model on the bottom foot), they have some fairly severe hardware issues as they age.
Your testing across several computers suggests to me that the issue is the TC itself. There is no way to check the drive in the TC.. no tools can access a network drive. And Apple used only the most minimal use of the local OS in the TC.. there is a SMART check and integrity check at boot.. if either of these go off you will get a disk fault in the airport utility.. but they are not repairable.
The best check (if you can call it that) is to do a full one pass erase of the disk.. this is a low level format of the disk.. and if successful will pretty well prove the drive is intact. It will also of course wipe out all data so backup if you have stuff on it you need. The erase will take several hours.
If the TC is actually <3years.. and you have current applecare on a computer.. apple will replace it.
If the TC is >3years.. there is some stuff you can do if you are suitably mad. But IMHO.. 3years is the economic life of most consumer stuff now.. I think you should consider replacement.. unless you are mad.
I also class myself in the later category and hate throwing stuff away so I attempt repair of most things.
Gen3 TC have some tricky faults though. See
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
Some faults may show in the log of the TC.. you will of course need a v5 utility to do that which will not install on Mountain Lion.. but can be tricked in.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Help needed with missing data problem in CRVS2010

We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
I think I have identified two potential issues that document the possibility of data not being included in the report.
The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
Is this related to ADAPT01483793? Will it be fixed in service pack 2?
If more details are needed, I would be happy to provide a sample report with stored data.

Hi Don,
Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also.
There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
Don
Edited by: Don Williams on Oct 26, 2011 7:40 AM

Is it wise to keep the Nikon camera files "DSC's" after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera'

Is it wise to keep the Nikon camera files "DSC's" after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera's DSC files?

DNG files do not contain some metadata supplied by the camera, which can be used by the manufacturer's software. Thus, if you don't keep the original Raw photo, you will lose this information.
If your 1000% sure you're never going to use the manufacturer's software, then this isn't a problem. But who can be sure what software you will be using 10 years from now?

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

I have a strange 3g data problem.

Similar Messages

Maybe you are looking for