I have a Stuffed New Board?

Please Help before I chuck this board back to where it came from...
Iam having major issues with a K8N Neo Platinum NF250g and a New WINXP Pro with SPK2 on it already.
The problem is that WINXP Pro wont get pass the setup stage after a full format.
It gets to about 45 to 56% and then the famous Blue Sceen of Death appiers with a problem saying that " If you have any new Hardware or Software installed to remove it or disalble it...
My first thourts where I havent plug somthing in right. So I go and check everything and find that theres nothing wrong. I do it again and same thing BSOD again. So me thinks maybe my graph card has **** it self. Put my old MSIFX5700.
boot up, quick format and samething again. So I think maybe the ram isint sitting in right. Move Geil DRR 400 512m to DIMM2 and well it didint boot up. LOL.
So I move it back and take out me Sound Blaster Live 5.1 and then trying the whole all over again. Quick Format. Now in Setup 45% Blue Screen of Death...
I have even tried swapping HD's around and still got the same resault.
So I decided to install a Coppied Version with WINXP Pro with Service PK1 on it.
It acuttuly got passed the setup and finaly booted windows.
I was starting to think that the WINXP pro I brought was stuffed. Untill I installed Doom3, StarWars BattleFront and FarCry. All of the games will with in 5mins of starting up. I get the windows saying that it has encouted an error at this adress
STOP: 0x000000A (0x408ce16c, 0x00000002, 0x00000000, 0x80818652)
This is same as what I get with the Blue Screen of Death.
The only thing that I can think of is that the AGP port is stuffed.
Please can someone help me solve this problem!!!.
System Specs:
AMD64 3000+
K8N Neo Platinum NF250g
Geil 512 DDR 400
Thermal Take 400w PSU
Sapphire 9800XT 256m
2* WDJB 120g 8m Cached
1* WD200g
Sound Blaster Live 5.1
Thermal Take : Tsunami Dream Case

Quote
Originally posted by DarkSpeed
System Specs:
AMD64 3000+
K8N Neo Platinum NF250g
Geil 512 DDR 400
Thermal Take 400w PSU
Sapphire 9800XT 256m
2* WDJB 120g 8m Cached
1* WD200g
Sound Blaster Live 5.1
Thermal Take : Tsunami Dream Case
How many amps on your 12v line on that 400w , looks a bit low for a amd64 system.
turn agp fastwrites off, use sata 3 and 4, dimm 1 and 2, turn all oc featuers off in the bios, use usb only keyboard and mouse, do an install with the mimium of hardware and add things afterwards. I think installing XP SP2 from the start is not a good idea, the support for the NXE bit is not so stable yet. better to install XP Sp1 and upgrade later..

Similar Messages

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

I have a brand new ipod touch and it wont connect to itunes or my computer!!??

I have a brand new ipod touch however when I connect it to my computer, itunes does not recognise it and neither does my computer. The drivers have downloaded and are showing working. I have tried uninstalling and re-installing itunes as discussed in support centre however nothing seems to work. The ipod itself just has the connect to the computer on the screen, is fully charged and when plugged in a little lock sign comes up for a second or two above the itunes icon!!! Let me know if you have any further suggestions please.

Thanx for you suggestions, I used my old xp laptop...update software and my ipod connected however the memory is not large enough to hold my itunes library so I could see it was not the cable or the ipod at fault.
I have tried to connect to my vista laptop again and have tried all of the suggestions in troubleshooting again...I have even upgraded to windows 7 to see if that cleared the problem....and....my computer has located my ipod but is only recognising it as a digital camera so back to the drawing board...
Please have you any other suggestions???

I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone

I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone

Basics from the manual are restart, reset, restore from backup, restore as new. If you've been through ALL these steps and you still have the problem, you'll need to bring the phone to Apple.

Petalinux fails to build for new board configuration

We’ve successfully brought up our new board running a simple application that loads off the SD card and prints “Hello World”, blinks a LED and accesses DDR3 memory. I’m trying to port 2014.4 Petalinux to work on the design and am having the following problems:
Running petalinux-build, I get the following errors building u-boot:
[ALL ]   CC      lib/asm-offsets.s
[ALL ] In file included from /home/robert/Superior/build/linux/u-boot/src/u-boot-plnx/include/common.h:89:0,
[ALL ]                  from /home/robert/Superior/build/linux/u-boot/src/u-boot-plnx/lib/asm-offsets.c:15:
[ALL ] /home/robert/Superior/build/linux/u-boot/src/u-boot-plnx/include/flash.h:20:14: error: 'CONFIG_SYS_MAX_FLASH_SECT' undeclared here (not in a function)
[ALL ]   ulong start[CONFIG_SYS_MAX_FLASH_SECT];   /* virtual sector start address */
[ALL ]               ^
[ALL ] In file included from /home/robert/Superior/build/linux/u-boot/src/u-boot-plnx/include/common.h:1063:0,
[ALL ]                  from /home/robert/Superior/build/linux/u-boot/src/u-boot-plnx/lib/asm-offsets.c:15:
[ALL ] /home/robert/Superior/build/linux/u-boot/src/u-boot-plnx/include/environment.h:153:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function)
[ALL ] #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
[ALL ]                    ^
[ALL ] /home/robert/Superior/build/linux/u-boot/src/u-boot-plnx/include/environment.h:161:21: note: in expansion of macro 'ENV_SIZE'
[ALL ]   unsigned char data[ENV_SIZE]; /* Environment data */
[ALL ]                      ^
[ERROR] make[4]: *** [lib/asm-offsets.s] Error 1
[ERROR] make[3]: *** [prepare0] Error 2
[ERROR] make[2]: *** [sub-make] Error 2
[ALL ] make[2]: Leaving directory `/home/robert/Superior/build/linux/u-boot/src/u-boot-plnx'
[ERROR] make[1]: *** [/home/robert/Superior/build/linux/u-boot/u-boot-plnx/u-boot] Error 2
[ALL ] make[1]: Leaving directory `/home/robert/Superior/build/linux/u-boot'
[ALL ] make: *** [sub_build_component_/none/u-boot/single/u-boot-plnx] Error 2
[ALL ] make: Leaving directory `/home/robert/Superior/build/linux'
In trying to understand what is causing this error, it appears it may be due to the fact that our design has no QSPI in it, which is listed as optional in the Petalinux manual. The u-boot code appears to expect that it can read its environment information from a section of QSPI. We’d prefer to not add one. Any idea if there’s a work-around for this, assuming this is the problem? I also tried configuring a system and telling it we have a QSPI. I get the same error compiling.
So now I'm at a loss. Any ideas or suggestions would be greatly appreciated.

It now works fine after changing my platform-top.h to:
#include <configs/platform-auto.h>
#define CONFIG_SYS_NO_FLASH
/* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE                 (128 << 10)
#ifndef CONFIG_ENV_IS_NOWHERE
# define CONFIG_ENV_IS_NOWHERE
# define CONFIG_ENV_SECT_SIZE           CONFIG_ENV_SIZE
# ifndef CONFIG_ENV_OFFSET
# define CONFIG_ENV_OFFSET             0xE0000
# endif
# define CONFIG_CMD_SAVEENV
#endif

Cant get into Bios, New board (K8T Neo-FIS2R)

I just put in a new board and cpu, everything seems to start up fine. BUT I press DEL to get into the bios settings and it tells me theres no bios installed. My HDs wont autodetect at the start so i havent gotten to windows yet, HD taken from old pc with winxp on it already.
Im totally lost here as what to do.
Can i just DL the newest bios drivers and flash?

Quote
no bios installed
...that's the Promise controller...you have to press Delete when you first power on, you're probably missing the timing because of the Core Cell screen...
...you don't want to flash the BIOS until you get a stable system...well, you could, but...

New boards: Music, Imaging, Navigation and Phone A...

Today we have opened up a few new boards to Support Discussions. We hope these new sections help you to find the right place for your questions and get faster responses from other members.
In the next few days, we'll be moving some old threads from the other boards to the new ones. For example, existing topics about gps that are now in the Nseries-board may be moved to the new Navigation-board.
I hope the new boards make sense!
See you on the boards,
vandelay & Nokia Support Discussions Team
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

You need the "PC and MAC software" board under the "Software" heading.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

New boards created

Greetings
As you may have noticed we have added 2 more boards this afternoon within each Category to better assist the community in having a more focused conversation.
We added to Notebooks
"sound and audio"
"display and video"
We added to Desktop PC
"sound and audio"
"monitors and video"
We added to Printers and All in Ones
"mac printing"
"software and drivers"
Finally we moved some of the most active threads on these topics to the new boards. If your message was moved you will see a placeholder note indicating where its new location is.
Thank you for your ongoing participation in the HP Consumer Support Forum!
Message Edited by DaniW on 12-17-2008 09:30 PM
DaniW
HP Forum Admin
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

pagecontext.putsessionvalue(String,Object) method doesnt exists. I need to pass a dictionary object. Please let me know if any other options are available.
Thanks,
Viswanath

RMA'ed K8N Neo4 Platinum board, no sound on the new board's output

Hi Folks,
I just got back the replacement for the K8N Neo4 Platinum boad I sent in a month ago. The good news -- my mirrored RAID array came back up and my WinXP/SP2 setup looks fine. The bad news -- my front speaker output doesn't put out any sound. My Amplified 2.1 speaker set was plugged into my older machine and working fine, and I just swapped the speaker cable into the green output plug on my MB, and no sounds comes out. Sounds was working on the previous MB which I sent in for RMA, so the software on my HDD's should have been set correctly to generate sounds on the new MB.
First, any suggestions on how to get the sound outputs working? Second, any pointers on how to diagnose what's going on? Should I be seeing "Realtek '97" (or something like that) for the playback and recording devices, for instance?
Thanks in advance for the help!
Clark

Couple of things come to mind. Power on the system and head on' over to the bios. Ensure the audio onboard is actually turned on...or if the board they sent you had it disabled.
Check the Device manager for any "!" in yellow next to anything in the audio dept. (windows control panel/system/hardware...yadda yadda....) If the onboard audio is turned 'on' and windows is seeing it? You'll have a heading for AC '97 listed, and also under sound effects options in the control panel it should be listed. If it's listed as working 'ok'? I seem to remember a set of jumpers on the motherboard for audio output. In the manual it's listing as follows:
"If you don't want to connect the front audio header, pins 5&6, 9&10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise the line-out connector on the back panel will not function" That's out of my manual regarding JAUD1 connector. And I have the Neo4 K8N board.
Best of luck!
S-

New board wont power up? [DV6]

hi guys, recently bought a motherboard on ebay(it was marked that it DOES power up and all fan works and everything) and i made the swap from my DV6 3210us to a DV6 3160us, and unfortunately it wouldnt power up, HOWEVER the charging light is on and when i press the Power button the LED would turn on then off no fan spin or anything(see video) what could be the cause of this?
what im thinking is the AC Adapter trying to power the motherboard was rated at 65w from my DV6 3210us, the new board i receive is from a DV6 3160us and it requires a 90w AC Adapter, could it be the issue? or is the motherboard bad? CPU from the 3160 works just fine, infact im using the CPU on my 3210 as i write this up. so what should i do?
this is the video with me trying the new motherboard with the necessary cables plugged, you can see what im referring too
http://vimeo.com/23890296
please let me know whats wrong with it, thanks
UPDATE: read up on a thread regarding someone who trys to charge a notebook that requires 90w ac adapter with a 65w and one guy mentioned that the 65w might cause the laptop issues and wouldnt let it turn on... could that be just a safety issue? because idk how HP laptops work, if its really needed to have the right ac adapter wattage to make it power up

well i had the necessary cables plugged in order to make the board powerup, did the same with my current laptop and it did fire up, however the new one thats in the video doesnt want to but im assuming its the low 65w adapter trying to power a 90w motherboard you understand what im trying to say?
and ive stated that i took the CPU which is a Phenom II Quad Core from the 3160 which is the one i bought from ebay and move it to my 3210 which is a Phenom II dual core and its working just fine so it isnt the processor issue, the board has an ATI 5650 Dedicated
The person said that the client just gave it to them, he did the test, Motherboard LED lights up, fan spins, CPU works etc.
like i said could it be that the 65w ac adapter is too weak to power up the 3160 board? because of the fact it has that dedicated graphics card which im sure needs more juice?

H61M-E33 (B3) powers on then hangs and enters boot loop (new board)

Hi guys bought all the kit in my sig and I put it all together connecting to my screen via VGA on MOBO and powered up.
I get one long beep and a message on the screen
The top half details all my components and it looks like everything is detected properly
under that it says
all settings were reset to default values
Press F1 to setup
Press F2 to continue
If I press either the the system shuts down and restarts over and over with nothing making it onto the display.
It gets stuck like this so I reset CMOS and takes be back to square one (rinse and repeat)
I have tried
Reset CMOS
Re seat and change slot for RAM
Push RAM more firmly into socket
Swapped for tow different sticks of RAM I had
Disconnected everything from MOBO headers accept bare minimum ie power and PWR Switch
Removed board from case laid it on cardboard and tried again.
Every time same result
I don't know where to go from here
Any one got any ideas?
Cheers Jake

just an update sent this board back to supplier who said there was no problem but would send me a new board anyway.
New board arrived and looked like it was a newer addition so possibly has an updated BIOS. Anyway put it all together and worked like a charm.
No trying to connect to an Onkyo tx-sr607 receiver via HDMI but having big problems. With amp clicking and not getting sound to come through properly and no bit-streaming of DTS-HD
Do I need to use the realtek sound and drivers?
all the sound should go through the HDMI cable.
Anyone know of any settings I need to adjust?

One worry about buying a new board - X2 CPUs?

i am planning to build a new system in august and have decided on a 4400+ (dual core) with the MSI neo4 platinum mobo.
i've built plenty of pc's in the past but have never flashed a bios (never needed to). one thing i am not clear on is what will happen if the board i get has an older bios and wont recognise the 4400+? will it boot normally but only see one core, or will it simply not boot at all.
i know some boards let you do an emergency recovery thing off a cd or floppy, either with a batch file or just the rom image. Is this the same for this board? i mean if it wont boot because it wont detect the CPU, can i still flash the newer bios to the board?
thanks for any replies - i did a search for neo4/x2/ bios etc but didnt get anything so apols if already answered

Quote from: tommo123 on 01-July-05, 01:07:26
i hope you're right rsheppick
no idea what i'd do if it wont boot.
I promise if it doesn't boot it has nothing to do with your motherboard needing the newest bios for that cpu.
I want to point out that if the motherboard knows what a 90NM cpu is then you are fine which all new MSI boards do.
For further proof I will quote an artical from Anandtech that can be read HERE!
Updating DC BIOS & Revision E Memory
Updating BIOS for Dual Core with an x2 Processor
This brings up the nagging question that is always asked when BIOS upgrades are required for certain CPUs. What do you do if you have a board that needs a BIOS upgrade for dual-core and you only have a dual-core chip? We asked AMD this question and got the following reply:
"If the BIOS you are working with (original BIOS in the board) supports a rev E single core (AKA... 90nm as most new boards should), it will allow you to flash the BIOS to a BIOS that supports rev E dual core. In my experience, a DC processor with single core rev E support will run fine, but only as a single core. If the BIOS doesn't support rev E (In other words, you may have a good board, but the BIOS is pretty old), you will likely need to install a pre-rev E (AKA-130nm) AMD processor to flash the BIOS.
I'm told that if a customer can't flash their BIOS, many mobo vendors will mail out the BIOS chip to them (if it's not soldered down, obviously)"

Should I buy a new board?

Im looking at maxing out my CPU on my K7n2-Delta L board
2.2Ghz is the fastest cpu the board will take.
Need help making up my mind.
I have $100-150 to spend.
DO I buy the new cpu?
Do I buy a new board/CPU combo?
The new board must be able to take x8AGP
Enermax p365 PSU
IDE
ALSO MAJOR here It must be 100% compatable with DDR PC3200 • CL=3 • UNBUFFERED • NON-ECC • DDR400 • 2.6V • 128Meg x 64 Crucial Ram.
So, do I look at BOARD/CPU upgrade or should I just max out the cpu for the board I have?

Quote from: Glenn on 23-August-05, 07:13:51
Save your money and by an Athlon 64. You'd be pissing away your money. You won't get much more that is unless I am reading your first post incorrectly.
What are you saying here? You ONLY have 128MB RAM or what?
More RAM will give you a boost, spend that money on some good RAM that will go in your next system. For instance some good Mushkin http://www.newegg.com/Product/Product.asp?Item=N82E16820146355
Otherwise save your money I personally think it would be a waste ATM.
BHA! No I cut and past the wrong one in sorry. I have 2 sticks 1GiG each. Total of 2 gigs in Dual Channel mode. It is Crucal DDR400 ram

HT1386 I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
(83068)

HT1449 i have bought a new iPod touch and when i went to sync my iTunes library most of the songs didn't come across they get a explanation mark at the side they are whole cds of music. but i didn't have this problem on my old ipod touch when i was using

I have bought a new ipod touch and when i went to sync my music library on to it only a few songs went over, the ones that didnt had a ! next to them. I had no problem when using my last ipod touch but i was using a pc at the time not a mac though.

Hi there,
This usually meas that iTunes can't find the original files. I would recommend taking a look at the article below for some tips on locating that lost media.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
-Griff W.

I have a Stuffed New Board?

Similar Messages

Maybe you are looking for