I have a suggestion to make photos show better!
Horizontal photos cannot show better in vertical screen. On the contrary, vertical photos cannot show better in horizontal screen.
So I think I have an idea to make it better. Only shows horizontal photos in horizontal screen, and only shows vertical photos in vertical screen.
This is not a technological problem. Because the computer knows the horizontal definition will larger than vertical definition if it is a Horizontal photo. Vice versa.
Thank you very much.
Apple dose not read these forums for suggestion or recommendations. I recommend that you go here to make a suggestion:
http://www.apple.com/feedback/ipodtouch.html
Similar Messages
-
I have a Suggestion to make iTunes better.
I really have no idea if someone else has had this idea posted or not but it is a really good suggestion (i think). I sometimes find myself surfing iTunes at night just looking for music. Sometimes I run into artists that I sort of dig. My biggest problem is being compulsive buyer (YES I admit it). One thing that I do to control this impulse, is I put it on the list... that's right the WISH LIST, or as I like to think of it... the I'll Think About It, or the Maybe's list. I really feel that iTunes should get one, because I am always forgetting the names of the artists/bands that I run into late night surfing. A list of some sort would just make it easier to find the artists later.
custom Windows XPJust create a normal playlist and drag the tracks you want to remember into it from the iTunes Store. That will save them for future purchase
Be aware that in some cases, tracks may be removed from the iTMS for various reasons, so depending on how long you wait to purchase, you may find that a given track is no longer available. So if you know you want a given track, you may be wise to purchase it when you know it's available. For this reason, it's not a good idea to use the Shopping Cart as a "wish list". If an item gets removed from the iTunes Store before you purchase, it can in some cases corrupt your Shopping Cart and prevent you from buying anything further until you contact the iTunes Store and have them clear your cart.
Message was edited by: Dave Sawyer -
A suggestion--please make Itunes behave better when updating library
Whenever iTunes is running Updating Library, if I switch to another application, every 15-20 seconds iTunes pulls itself back and gives itself top level focus. I KNOW the library is updating. Why do I need to be reminded of this every 15 seconds. Basically, while the library is updating, I can't use my computer for anything else. Please make the "Updating Library" window stay in the background when the user has tabbed away to another application. Thanks!
May want to leave feedback here:
http://www.apple.com/feedback/itunesapp.html -
Why aren't all photos showing up under "Photos" in iPhoto?
Hi
I have noticed that not all photos show up when I have "Photos" selected in the Library on the left. There are photos I just imported from my iPhone and they show up when I select "Last import" or "Last 12 months" but not unter "Photos". Any ideas what is wrong here and how to fix this?
(btw. I have no hidden photos)
Kind regards
Sebastian
I am running the latest iPhoto and OS XIf the Photos are under 'Last Import' or 'Last N Months' then they are in the Library somewhere, just not where you are expecting them to be. We know this as both Lat Import and 'Last N Months' are not places, just listings of elements in the the Library.
The two most common reasons that they can't be found is either an incorrect date on the camera or the Sorting (View Menu -> Sort Photos - or Sort Events, as appropriate) has changed.
Quick route to find them: Right-click on one of the images in Last Import and select 'Show Event'. This will bring you to the image in the Library. -
My iPhone doesn't load ANY of my old pictures- they show up blurr y and with a circled exclamation- this is extremely frustrating because I don't really have any of my old photos- most of the pictures were even taken on my phone. It is getting really frustrating
Download from here: http://www.mozilla.com/en-US/firefox/all-older.html
I'm not familiar with the uninstall process on MACs so I hope you'll forgive me for referring you to this site: http://guides.macrumors.com/Uninstalling_Applications_in_Mac_OS_X -
Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself
If you have Pages you can create customs pages for your book as TD suggested. If you have Pages from iWork 09 or 11 this app will add 80 or so additional frames to those offered: Frames and Strokes Installer. Don't use it on the latest Pages version, however.
This tutorial shows how to create a custom page with the theme's background: iP11 - Creating a Custom Page, with the Theme's Background for an iPhoto Book. Once the page is complete to get it into iPhoto as a jpeg file follow these steps:
Here's how to get any file into iPhoto as a jpeg file:
1 - open the file in any application that will open it.
2 - type Command+P to start the print process.
3 - click on the PDF button and select "Save PDF to iPhoto".
NOTE: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 300 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
4 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
5 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. For books to be printed choose 300 dpi. -
I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?
You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. -
I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before
Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive. -
I am trying to upgrade to Mavericks but my system info shows not enough space, I have moved my photos except for 36.6GB to an external harddrive but it is showing that I have 2.1TB of photos on the computer. iphoto doesn't have near that many and it shows a lot of videos/movies that aren't there either!! I don't know what else to try. I need to upgrade so that I can install the photo shop that I bought and can't get to work!!
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running the app as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s. I have looked onlime at several threads and there are no real answers as to what I need to do or am doing wrong.
I am also having this issue.
I've just spoken to someone in the Apple Support Centre who advised me that since the product is in beta, he is unable to assist. I wanted to find out whether someone was able to delete the data for me, or 'reset' the photos app somehow. This apparently cannot be done. He suggested I provide feedback via the feedback page, which I will do, but to be honest doesn't fill me with a lot of confidence in the issue being fixed.
I also deactivated the service and waited the 30 days for the pictures to be deleted - this should have been completed in mid-January. Instead, my iCloud.com Photos page is now showing the photos that should have been deleted as grey squares, just as you described. I am also unable to delete these photos; every time I try, I get the same message about a server error.
I am also unable to disable the service by enabling and then disabling it on my iPhone. Each time I have tried this it hangs on uploading for several hours, with the progress bar not moving at all. When I disable it on my iPhone, the web app remains unchanged.
If anyone has had this issue and has managed to fix it, PLEASE share your wisdom. I am out of patience! -
Why aren't my scanned photos showing up in iphoto? I have an HP scanner with the option to import directly to iphoto. It says "sending to destination" but it never gets to iphoto. I scanned hundreds of photos several months and it worked fine with the photos going directly into iphoto - now it won't work. Any suggestions?
As the feature is part of your scanner set up nd not iPhoto, you'd need to ask the makers of that for help.
Regards
TD -
I have changed the dates of photos in an event, but the event is still showing the original dates.
I have a batch of old photographs that I have recently scanned and imported into iPhoto 11. In iPhoto I changed the dates to the dates when the original photos were taken (between 1971 and 1976) using the "Adjust Date and Time" and "Batch Change" menu options. This works fine as each photo now shows the date on which it was taken rather than the scan date which appeared when the photos were imported. However, the event itself still shows the scan dates so it does not appear in the right place when sorting by date. I'm finding this most perplexing because I have many scans of old photos (one goes back to 1900) and have been able to change dates of individual photos and the event has followed suit. Any suggestions would be greatly appreciated.
Within minutes of posting this question I fixed the problem. It's just a matter of holding down the Option and Apple keys while launching iPhoto and then repairing the library database from the list of options that pops up on the screen. Easy really. Just took me two days to work it out.
-
I have performed all troubleshoot suggestions to make my iphone and PC calendar update to each other via icloud.What else can I do to resolve this? This has been the most frustrationg aspect of changing to iphone and ipad. Thanks.
Welcome to the Apple Community.
1. First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
2. Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
3. If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings. -
Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!
MacDrive to provide better HFS support.
And to acces and write.
Maybe you are looking for
-
QGM for Greenfield SAP Implementation
Hi All, We are doing a greenfield SAP implementation. As of now we are done with DEV landscape build. We would like to utilize Quality Gate Management for Change Management in our project. I have few queries: 1) How should I define Transport routes a
-
I think I downloaded the latest Solaris Studio version. When I compile my code, I got the following error: bash-3.00$ gmake -f Makefile.sun CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/expo
-
Automatic Scheduling Agreement from Purchase Requisition
Hi All, Can we craete a Scheduling agreement automatically from a Purchase requisition? The scenario is like we will be craeting a third party Sales order and through ALE/IDOC system will generate a PR. Now we want to create a Scheduling agreement ag
-
Hi, I'm trying to implement logging a Netweaver application. The application must be backwards compatible with SP2. The SP2 logging works fine, but i can't get the Netweaver logging to work even though. Following are the steps i took (got this from s
-
Tools and Script for stopping and starting SAP instances in the landscape
Hi All, All our SAP system are on Windows 2003 and very few on Windows 2000. Is there any possiblity for having a script which will stop and start SAP on all the instances in the Landscape from a central system? Lets say we have some 200 SAP instance