I have a test version of scribedoor with extension zxp

how can I open zxp extensions with extension manager?

Double-clicking on the file should open it with Extension Manager, but in case the file associations are mixed up on your computer, you can select 'File, Install Extension' within Extension Manager.

Similar Messages

  • Have you tested external Air Superdrive with Powerbook via a USB hub?

    Have you tried plugging the Air Superdrive into their Powerbook via a powered USB hub? It seems the testing I've read with non-Air Macs has been just direct into the USB ports instead of via a powered hub. Can't a high-powered USB hub make up for the difference in power necessary to sufficiently drive the Superdrive? Does anyone know how the output of the Air's USB 2.0 port compares with that in a Powerbook G4?
    Thanks

    It has been reported outside these Apple forums that merely supplying more power to the MBA SuperDrive (in any of several ways) doesn't make it work with other machines. I've seen one website describing a hardware modification inside the SuperDrive's case (invalidating the warranty, of course) that was successful in enabling other machines to recognize and use it. It wouldn't be within the Terms of Use for these Discussions to say any more than that here; even saying that much may be going too far.

  • Have a test version in use for testing purposes and want to buy it now without loosung the files. How to do so?

    I've a test version in use for testing purposes and want to buy it now without loosung the files.

    Just buy it and enter your serial key.

  • This should not be this hard.  I have an older version of Photoshop with legitimate serial number.

    I just want to activate my copy of on my laptop.
    I was instructed to delete my version and download the version that needs no activation.
    NOW I cannot do that I am without my software program.
      My laptop is also an older version of design, but want to learn and use my Photoshop now.  How can I proceed.

    Windows 7
    and Photoshop CS  about 7 years old.
    Now learning photography and loaded my original software onto my laptop  (4 years old), and it would not activate.
    No phone activation allowed anymore.  Even though I have the case with all the legitimate serial numbers.
    The system left me up in the air, did what it suggested and did a delete of the older version.
    Now cannot get the version that needs no activation to accept my request to download.  What to do??
    PHEW as I said it should not be this hard.

  • Re: "no service" on iPhone 3Gs (version 4.3.2), my 3 kids all have iPhone 4 (version 4.1) with no issues! We are all with the same carrier (vodafone) and live in the same location. Please help me fix this!

    My iPhone 3Gs (version 4.3.2) has decided to no longer connect to my service provider/carrier (vodafone AU). There are 3 iPhone 4's (version 4.1) using the same carrier living in the same location, having no related issues. I have thought about updating firmware or restoring the iPhone, but not sure if thats the way to go?? My iPhone starts out recognising my carrier....searches & searches... but then.... connection "FAILS" and states "my network provider is no longer available"!!  Any suggestions?...please!!

    Anyone at all can advise- still not sorted :-(

  • Creating user with extension mobility on prime provisioning 10.5

    Hi All,
    Does anyone know any document or have any expirenece on creating user with extension mobility on prime provisioning 10.5?
    I'm facing challenges on it, appreciate if you have any document or experience to share with me.
    Thanks,
    Cherry

    What sort of issues are you facing?
    I'm also having problems, but I think it is system related.
    CUCM is LDAP synced.
    When PCP tries to provision Extension Mobility Access, it actually seems to be trying to update the user on CUCM (via AXL) (this fails as it is an LDAP user and the values come from LDAP and cannot be updated)
    I've got a tac case open.
    Bug details are currently hidden - CSCuo11522 - but this one is extension mobility provisioning issue
    There was also mention of another bug related to failures to provision users with directory URI's in their LDAP record. I didn't catch a bug ID for this one though.
    Cheers,
    Tim

  • Powerbook 1400 bus error (with extensions) error type 10 (without ext.)

    i have a powerbook 1400. bus error (with extensions) error type 10 (without extensions)
    no cd. floppy is dead
    the computer i put os 9 on it was a friend's 3400 witch is dead. i will see if i can get his hd.
    there are no pc cards in the slots and it has os9 so removing all the ram possable including the factory ram (i only have 16 mb noram in the expansion slot eather) it will not boot. (sad mac)
    the 1400 is my favorite computer
    I only have a dead pb 165 (no video only sad mac sounds) and a dell (i dont like pcs so i really need to get the 1400 working) and the dell has a very bad keyboard. it likes to repeat keys alot
    powerbook 1400cs/117   Mac OS 9.0.x   i want a newer mac

    macintosh lover
    It isn't what you believe that you need in the Mac so much as what its ROM tells the 1400 that it should have. Its software is integrated with what the Mac 'thinks' of itself as being, whether you use video mirroring, HDD spindown, persistent RAM Disk or any other feature that applies to PBs rather than to DTs. Why handicap the machine by omitting parts of its persona? It will be less stable, be given to unpredictable episodes of petit mal, and be downright unreliable as a result, especially if it also lacks the physical parts of its person that you mention. That is why it needs a System for its kind of PowerBook.
    Grant has outlined the best method of getting a handle on the PB, which will be much aided by its having a working HDD, a functional trackpad and so on.
    Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT     System 6.0.8 to OS 10.4.x

  • I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

    I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

    Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
    Go to System Preferences a open up the Users pane;
    On the left side of the pane, you shuold see Login Options;
    Enabled editing option clicking on the lock (it will ask your password);
    Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
    Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
    Select Enable Root Account (you can set a password, or not);
    Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
    Theorically, from this account you will be able to unistall the application.
    After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

  • Hi.  I have a Dell PC running Windows 7 64 bit.  I have the latest version of Adobe Reader,  It worked yesterday.  Today I have job training to do that is due tomorrow morning and I can't open PDF files.  I have to open a guide and read it and take a test

    Hi.  I have a Dell PC running Windows 7 64 bit.  I have the latest version of Adobe Reader,  It worked yesterday.  Today I have job training to do that is due tomorrow morning and I can't open PDF files.  I have to open a guide and read it and take a test tomorrow.  I have deleted and reinstalled the application.  I have rebooted.  I have made sure my PDF's are associated with the program.  Every PDF on my computer won't open and I get the same error message.  It simply says Attempt to access invalid address.  How can I fix this?  Thanks.

    Hi Don,
    I have seen this issue fixed for some users by modifying the following registry key:
    The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
    Set the key to 1 instead of 0 then reboot the machine.
    In case you still face the issue try the following registry key change:
    The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
    BEFORE:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
    AFTER:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
    Note: Please take a backup of the registry before attempting this change.
    Regards,
    Rave

  • Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

    Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

    yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

  • I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works

    I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works with my Aperture library.

    Gracias photo-enthusiast por tu respuesta pero hay docenas de de usuarios que tienen esta mismo problema, me da la sensación que nos tomas por gagas que no tenemos ni idea de lo que tenemos entre manos.
    Me alegro enormemente que no hayas tenido tu este problema.

  • IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK  AFTER THAT I BUY THE LICENCE? THANKS

    IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK  AFTER THAT I BUY THE LICENCE? THANKS

    NUNU
    Media cache files are not involved in the removal of the Adobe watermark from the project.prel file from a tryout.
    Just a re-enforcement mention...you cannot remove the Adobe watermark from a tryout "saved" exported product; whereas, you can from a saved/closed project file (project.prel).
    By exported product, I mean a burn to disc in the tryout or the Timeline of the tryout exported to a file saved to the computer hard drive.
    In the case of removing the Adobe watermark from the tryout project.prel, classically you delete the rendered files (Timeline Menu/Delete Rendered Files) in the purchased program. In no way is media cache involved in this. Some of us have found that there was an automatic removal of the Adobe watermark resulting from just opening the tryout project.prel file in the purchased program.
    Please review and consider.
    Thank you.
    ATR

  • When I installed the newest update it said some of the features were incompatible with this version of Firfox yet when Firfox starts it says I have the newest version.

    I got a new update. I installed it and it said that some of the features were not installed because they incompatible with this version of Fire. I figured "Okay" and continued. When Firefox opened it said I have the "Newest" version. Great, then how come some of the features are not compatible with the "Newest" version. That makes no sense!

    It is possible that because of changes made to firefox, some other software used with Firefox may no longer be compatibile (for example some toolbars) or it is possible the software may work with Firefox, but the software does not recognise the version of Firefox.
    First of all check the add-ons are up-to-date. Downloading, installing and using the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Compatibility Add-on] may help to allow such Add-ons to be run for testing, and hopefully some may actually work.
    * see [[common questions after after updating firefox]]
    If you are having problems, please state the full name and the version number of any add-on or plugin software that is causing a problem.

  • HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

    When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
    Here's the cycle:
    I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
    Click Restore
    Extracting software…
    Preparing iPad for restore
    Waiting for iPad…
    Verifying iPad restore with Apple…
    (empty bar under the Apple logo…does not show any activity)
    “The iPad “iPad” could not be restored. An unknown error occurred (9).”
    Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
    I swapped out the USB cable to a new cable and get the same results.
    I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
    I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
    I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
    It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
    So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
    Any advice would be appreciated.
    Thanks!

    Hello jaybearden,
    Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
    Resolve iOS update and restore errors - Apple Support
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

Maybe you are looking for