I have a therory and need some tech heads and CL to give it a t
Ok, the popping and crackling issue many have has gone on? long enough I would think. So I am thinking could it possiably be a power issue?What I mean is, like any kind of device that uses power if it is not getting the FULL required amount then what are the chances of failure if even on a small scale. So, is there a way to read the power usage going to the sound card/s? I know you can read the power going to Video cards, thus to trouble shoot an issue in regards to BSOD, crashes and the like concerning the VGA device. If the power goes under the required amount, you can see it and then simply wait for the system to crash. Seen this many times myself. Same with CPUs and mainboards. If the power goes under whats needed for stable operation, you get issues. I then would have to think the same thing goes for sound cards. Im not to sure but what is the required amount of amps for a sound card anyway? 5V or something running via the PCI slot? I dont know. So how can we gauge the amount of power going to a sound card and then assertain weather or not enough power is indeed getting to the device?I cant do anything to messure this but I would have to think the CL team would have the tools to read power usage then perhaps force a lower current to test weather or not the device fails or gives issue in regards to popping and crackling. My main thought here was when a light, be it a tourch or a lamp is not getting the fully required amount of amps, the light flickers. So would a sound device, not getting enough power flicker so to speak, hence popping and crackling. Anyway, its just a thought and I have not read anything anywhere on power consumption in regards to sound cards and the adverse affects if the devices is not getting full power. Plenty of listings on CPU , Video , memory and mainboards though. Any thoughts from anyone would be great as I think a power usage range on sound cards has not been fully investigated. well not to my knowlage anyway. Cheers
It could be but i think its unlikely, if it was the other stuff in your pc would suffer. I think its more due to the old creative?cards do this on certain boards chestnut which?at a glance seems to be plaguing?nforce 4 & 3 users, nforce 2 also had the same thing with the audigy 2 range, but that seemed to be more prevalent when?a sata controller was used. They both seemed to be fighting over ?pci bandwidth, there were loads of fixes ranging from changing your video card pci latency to 32 to wrapping the card in tin foil. None of these were a fix for all though and that never seemed to get fixed to my knowledge. I got the chance to try out my x-fi in an nforce 4 board last night and i can only say i pity you guys the crackles coming from my once nice clean x-fi dumbfounded me, and got me worried to. Back in my motherboard the crackles are not present thank god.
Similar Messages
-
I have project I want to run and need some information
Hi
I have project I want to run and need some information about technical, consultancy, architecture design
and what I need for this project (hardware and software(
I planning to stream live streaming 24 channels,
The feed is analog from pal STB cable or satellite.
I want to stream in 2 different resolution and bit rates
1. full screen 750-850k
2. 240x360 400-600k
the format is flash h.264
The channels are series, sport, news, and movie.
What recommended card (i have osprey 450e)?
What kind of requirement of computer I need (CPU, MHZ, CORE, RAM).
can i use i7 cpu or xeon cpu?
how many channels i can run in 1 computer?
I need cheap solution for this project around 20-30k$ for hardware.
thnaksI am working on a similar project.
Actually, i can encode 2 streams in h.264 with a resolution around 640X480 on a Intel Xeon E3120 (2 core) 3.16 GHZ configuration.
OS is a windows XP 32 bits. CPU usage is around 75%.
(note: FMLE instances are run with FMLEcmd not GUI mode)
Does someone know if i can gain performance with windows XP 64bits ?
My goal is to encode 4 streams on a single machine, does someone know if a dual CPU, let's say 2 X (4 core) Xeon, is enough ?
I don't know if FMLE support multiple processor with multiple core configuration.
I am maybe wrong, but after reading this forum, it seems many people have problems using FMLE under windows vista. Do we gain performance on Vista vs XP ? -
Some problem about SAP R/3 ~ I need some detail solutions and suggests
I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
Problem 1.2: In DOS, startsap command cannot start SAP R/3.
Problem 1.3: Oracle 9i database automatically shutdown by itself.
Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.
Problem 2: Problems in User Maintenance and Security of the SAP R/3 System
Problem 2.1: Super user account password was lost (e.g. SAP* password was lost)
Problem 2.2: Super users DDIC and SAP* were dropped in table usr02 in Oracle.
Problem 2.3: Some users have been locked or deleted by an ABAP programmer who has been granted with almost superuser profiles. For example, an ABAP programmer has been granted a profile of SAP_ALL and SAP_NEW but the system administrator would like to restrict all programmers form using SU01, SU02, SM01, so that no programmers can maintain other user's accounts.
Problem 3: Problems in the configuration of client copy
Problem 3.1: A copied client from the Client 000 cannot be customized.
Problem 3.2: No sample data in IDES after a successful client copy.
Problem 3.3: Logging on without being authorized. A new client is created and client copied and transported successfully. However, anyone can log into the system using user SAP* with the default password PASS.
Problem 4: Problems in the installation of SAP R/3 Server
Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.
Problem 5: Problems in the backup and recovery of Oracle 9i Database
Problem 5.1: A redo log file was lost and the database could not be started.
Problem 5.2: A group of data files were accidentally deleted and the database could not be started.
Problem 5.3: Both the online redo log files and archived redo log files have been damaged.
Problem 6: General problems regarding the general operations and the connection to the SAP R/3 System
Problem 6.1: After a reboot of the Windows 2003 Server, SAP service is not automatically started.
Problem 6.2: Some users complained that the performance of SAP R/3 is really very slow.
Problem 6.3: A user complained that his/her password was correct but he/she could not lock on the client because it was locked.Problem 2
2.1 If user account of the sap* is lost u can retrive by loging into os level as sidadm type this command
DELETE SAP<sid>.USR02 where BNAME='SAP*' AND MANDT=100
This 100 is the client in which u want to delete the sap*
after that restart the server and login as sap* with the default password as pass
there is also another way of doing this if needed u can catch me at [email protected] -
My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????
It seems Apple is having some issues at their end. There have been hundreds of posts on the forum with the same problem.
-
I need some detail solutions and suggests about below these problems ?
I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
Problem 1.2: In DOS, startsap command cannot start SAP R/3.
Problem 1.3: Oracle 9i database automatically shutdown by itself.
Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.3.1 - If you client copy from client 000, you need to go to SCC4 and set the client to customizing chnages allowed;
3.2 - If you do a client copy from client 800 (the one that SAP delivers data in) you should have data. Client 000 is empty (almost).
3.3 - You should be able to change the password of SAP* PASS user.
I am not sure which version you are dealing with, but ERP2004 and ERP2005 allow you to change the password suring installation.
Also, there is a parameter that can be maintained that allows you to log on as SAP*. If you set as not available, no one can log on.
Hope it helps,
Leonardo De Araujo -
Replaced zd8000 motherboard and need some troubleshooting help please............
Hello All,
I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before? Where can I go to get a free decoder that will work, as Windows only shows paid versions? We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing. Is that a normal temperature because I only have one of three fans running on the laptop? Is there anyway of making all three fans run to be sure there are no issues? I am positive I hooked up everything but again only one fan seems to be running?
3) I discovered some of the pins were damaged in the card reader. I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again. No such luck though. Is there anything I can do, BIOS update etc, to make the battery charge?
5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
Thanks, Ralph
P.S. This was a correct replacement board according to MB serial numbers. Everything else seems to be functioning properly other than mentioned. Our graphics went out on the original MB.
This question was solved.
View Solution.Some of the wires had pushed out of the harness that connected the other two fans. I double checked and re-attached those so now the laptop is running quite a bit cooler.
EVERYTHING IS GOOD TO GO! -
I am making a multiple page document and need some pages to be landscape and others to be portrait. How can I do this?
In pages you can only have one orientation of the Page. You have to rotate the content on the pages that you want horizontal. Save the document in Pages format so you'll have a original version to work on. Then Export to or Print to PDF and open the document in Preview. Here you can rotate the pages to horizontal viewing.
-
How do you access your .mac email from a PC? We migrated to icloud and need some guidance. Thanks.
We migrated our .mac email to icloud and need some help in accessing our email from a PC. Many thanks!
iCloud account not necessarily needs to be an Apple ID. Make sure, if you have both, to you enter the correct one.
-
I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit songs without actually downloading the songs that are explicit?
See if there's a non-explicit version and download that? Just download the individual songs you want, and not the others?
Honestly, your phrasing doesn't make sense. You're asking how to download an album without downloading its tracks? -
Why do I need a membership to install Lightroom 5 when I have paid already for the software and need to activate it and I will be finished?
you don't need a cc subscription to use the purchased copy.
download the installation file and use your serial number to activate when given the licensing option during installation. you should install 5.7 instead of installing 5.0 and updating.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information
Try a search with Google.
Why should we do your homework for you? -
I just downloaded a pdf form and need to open it and fill in blanks but how can I find the file in Adobe so I can open it??
Thank you in advance.Hi Steve Odem,
If you downloaded the file from a web page, it most likely went into a Downloads folder on your computer. If you don't know where that folder is, the easiest thing to do may be to use the Find feature of Mac OS or Windows (whichever you use), to search for the PDF form. Once you know where the file ended up, you can easily navigate to that folder in Reader. (Choose File > Open in Reader, then navigate to the file in the Open dialog box.)
Please let us know if you have additional questions.
Best,
Sara -
Is Adobe Photoshop cs3/10 still being supported? Mac crashed and need to get up and running again.
Is Adobe Photoshop cs3/10 still being supported? Mac crashed and need to get up and running again. Thank you for any info on cs3. mayord
I believe if you were to ask Adobe Support they would tell you that CS3 is no longer supported by their services, if that is what you are refering to when you say "being supported". That means they are not likely to offer assistance with you re-establishing it.
But you can probably re-establish it yourself. If you need to download it there is a place for that available:
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html -
hello, my friend's i pad locked and need the apple id and password to unlock the setup and open the i pad but he don't remember any one of them nor his email and security questions the serial number of tha i pad is DYT*******PH and the part number is MC979ZP/A what can we do about that please solution?
<Edited by Host>Your friend will have to remember or find his account id and password, without them he won't be able to re-activate the iPad.
Does he have any of the account's downloads in his computer's iTunes library : Recovering a forgotten iTunes Store account name.
Or has he tried finding it via http://appleid.apple.com : Apple ID: How to find your Apple ID.
If he can find the account id he can then get its password reset via http://iforgot.apple.com
(As these are user-to-user forums, you're not talking to iTunes Support nor Apple, I've asked the hosts to remove the serial number from your post.) -
September 26, 2011
Dear Mozilla,
I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
Sincerely,
Randy Brown
[email protected]You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada
Maybe you are looking for
-
The latest update to CC has caused brush lag across all versions of Photoshop. How can I fix this?
Ever since this past week's update to CC, I have noticed a decrease in performance across all versions of Photoshop I have installed, CS6 and CC. Many of the brushes I have, both in Photoshop's default and my own custom sets, lag horribly when drawi
-
Error 1603 in deploying Office 2003 by creating an application object using its MSI package!
Hello, I got the error of 1603 when I ran Office 2003 MSI package through NAL. I have no idea how to resolve this problem. Even though I enabled logging in Office 2003 installation, I still could not figure out what went wrong and what caused the err
-
Apply validations on internal table fields before updating table
I have to upload data from a CSV file to R3 ztable, but before that I have to apply diffrent validations to check if fileds does not contaion invalid characters .... eg for a currency field I want to check if user has entered value in decimail format
-
Oracle9i jdbc on linux with Sun App Server7
Hello all, I'm having trouble setting up oracle9i jdbc drivers on linux. I downloaded ojdbc14.jar from oracle's download site and put it in sun/domains/domain1/lib. I also added the jar file in the server classpath suffix, but somehow the connections
-
Hello, i bought an iphone 4 more than two years ago from t-mobile austria an asked for an unlock one week ago, now ive got an message that it has been submitted to apple an i have to connect my device to itunes with another sim card. After i had done