I have a Time Capsule as my router. I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.
I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.
No, its is connected direct to the providers fiber box.
Similar Messages
-
I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my housActually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice. -
I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.
On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time. -
My mac mini will not shut down. I need to manually shut it off with the power button.
My mac mini will not shut down or restart. I need to manually shut it off with the power button.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
Setting up time capsule on a router using my existing wireless network
how do i set up my existing time capsule to my wireless network.
Earleir i was using TC as a wireless hub too but i do not intend to do so now . please adviseNot sure exactly what you mean..
The best way to setup the TC is plugged in by ethernet to existing router. You can then turn off wireless.. or setup wireless as roaming network.
See http://support.apple.com/kb/HT4260
It doesn't matter if the main router is apple or not apple, but the same ssid/security setup will work.
It is possible to extend wireless with another apple router. That has limitations but is much preferred to using non-apple router.
If you are trying to join a TC to a non-apple wireless network.. it can be done.. but the setup is extremely slow and poor reliability. It is not even available I think as option in v6 airport utility.. it might be in the setup. You can choose it in v5 utility by holding the option key when you choose wireless network mode.. it is so poor Apple do not support it.. and the TC becomes a dumb wireless client.. ethernet ports are shut off.. all wireless is reduced to single band client.
But there it is if you want to try.. Join a wireless network.. hidden so use option key to reveal. -
My mac mini will not display internet properly on my Sony 55" hdtv!
I have a older mac-mini that when on the internet overlaps text and info. It does not matter what resolution you use, what size or zoom your on. I even took it in to apple recently and had them install new software, Snow leopard 10.6. I bought new software took it to apple to install because drive doesn't work. Even after all of that I still go on websites and things overlap and you can not see all info making it impossible to use. I doubt very seriously anyone out there will have an intelligent response. If your reading this your probably stupid and don't know it, or your answer will not work. O yeah imagine me ******* your dog, then killing it while ******* it!
What is the resolution of the monitor you are using?
What web browser are yo using?
Have you tried another browser?
Do it do that on all sites?
Can you post a screen shot? If you click on the camera icon in the Reply box you can upload a photo/image -
Out of the box Mac mini will not startup
Hello all, just set up a new mac mini(meaning I plugged everything in and turned it on) I get the startup chime then nothing. My screen shows a system folder with flashing ? I tried everything in the manual, and then some(except calling Apple) Checked cords, unplugged wait plug back in, etc. Can anyone help?
Unfortunately, it sounds like you may have gotten a "bad apple". You should call AppleCare Support or take the Mac mini in to an Apple Authorized Service Provider or Apple retail store.
To get your disk out, restart the Mac mini and hold down on the mouse button. This should eject the disk.
-Doug -
I am tired of getting the run around. I want to have Win 7 on this computer for gaming and a few other things that I can only do with a Win machine. Please help me if any one knows about this problem or has had the same issues. I cannot be the only one!
Carey NuyenHi Carey, not much to go on, but so we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
Time Capsule used as router attached to Comcast Modem. Wireless stops working with no light showing and Link indicator on modem off.
All I have to do is unplug the TC and plug it back in.
TC cycles up and green light appears as well as the Comcast modem operates correctly.
TC 4 yrs old. How do I correct?I have the latest and greatest Time Capsule and Comcast. Here is the weird thing. If I have one network set up, then occasionally that network will wedge. If I set up a 5GHz and a 2.4GHz network, then one of them (usually the 5GHz) will wedge. I saw this with a previous Time Capsule, Apple said call Comcast. They checked it out and said it was Apple's problem. Apple said maybe you Time Capsule is bad, so I bought a new one. The problem persists.
Tonight it's not complely wedged, but super slow. The 5GHz network is getting 0.45Mb/s while the 2.4GHz network is getting 17Mb/s. Both are coming in from the same Comcast cable modem. Apparently the Time Capsule treats them as separate.
Is it the cable modem or the Time Capsule. I am betting on the Time Capsule, since rebooting it fixes the problem. Resetting the cable modem does not.
Apple is NO HELP at all. They say reset the Time Capsule. Did that fix it? Yes. Problem solved! No, problem not solved. It will happen again in a few hours.
Here's the traceroute. Note what happens a few hops away. At hop number 7 the ping times go up by a factor of 200.
Huginn:~ darrell$ traceroute 128.114.48.10
traceroute to 128.114.48.10 (128.114.48.10), 64 hops max, 52 byte packets
1 10.0.1.1 (10.0.1.1) 0.952 ms 0.886 ms 3.428 ms
2 67.170.200.1 (67.170.200.1) 43.269 ms 27.611 ms 21.004 ms
3 te-7-1-ur01.scotts.ca.sfba.comcast.net (68.85.101.53) 11.252 ms 8.450 ms 9.778 ms
4 te-1-5-0-7-ar01.sfsutro.ca.sfba.comcast.net (68.87.226.14) 15.026 ms 27.372 ms 15.516 ms
5 he-3-9-0-0-cr01.sanjose.ca.ibone.comcast.net (68.86.91.45) 14.374 ms 17.450 ms 24.752 ms
6 pos-0-0-0-0-pe01.529bryant.ca.ibone.comcast.net (68.86.86.122) 14.627 ms 15.408 ms 14.460 ms
7 xe-1-2-0.0.paix0.tr-cps.internet2.edu (137.164.130.233) 1583.490 ms 2697.533 ms 3240.337 ms
8 xe-1-1-0.482--2152.paix0.tr-cps.internet2.edu (137.164.131.62) 2413.800 ms 2937.085 ms 2667.384 ms
9 dc-svl-core1--svl-px1-10ge-3.cenic.net (137.164.46.14) 4362.188 ms 2399.774 ms 1397.535 ms
10 dc-svl-agg1--svl-core1-10ge.cenic.net (137.164.47.120) 588.755 ms 2447.772 ms 1795.253 ms
11 137.164.3.49 (137.164.3.49) 3179.385 ms 1718.755 ms 240.350 ms -
Hello I am having problems with my Time Capsule (2nd Gen) and being able to get the wireless signal working throughout my house. I have concluded the only step I need to try to fix this is to reset the Time Capsule.
My concern is that if I reset the capsule I will lose all of the documents off of the external hard drive of the Time Capsule. Will this happen?
Is there anyway to avoid losing these files, or is there some way to attach a USB cord to the Time Capsule and be able to retrieve my files?
Thanks for any help out there.Correct.. no files are lost in resets..
Plug the TC straight into the computer by ethernet.. use a LAN port of the TC. <-->
Factory reset.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
When it comes backup the TC will have an IP of 10.0.1.1 and the computer will be 10.0.1.2
You can access all your files on the TC.. with very minimal setup.. but Mavericks can be a right royal pain.
If the disk doesn't show up in Finder.. manually mount it.
Go, Connect to Server..
AFP://10.0.1.1 and when the computer finds the resource it will ask for a password.. type in public unless you changed it.
You should now be able to access the files.
I recommend if you have important stuff on the TC you do not want to lose.. get a USB (or faster) drive today.. plug it into the computer and make a backup.. the TC is not adequate as a NAS or file server as it has no ability to either backup itself or even have TM back it up. -
Hi,
I just moved to a new place. I used to have my own internet setup and used my Airport Time Capsule as my router. Now that I don't need to use it as a router I would still like to use it as a storage device for my pictures. Can I still do that wirelessly or do I have to plug it into my computer? And if I do (which would really be crumby) do I just use a USB cable?
Please help. I have a lot of work stored on it and I am feeling pretty stuck at the moment.
Thank you,
CharlieYou can use your Time Capsule in your new network in a number of ways. One would be as a NAS device which I believe you are looking to do.
To do so, you would connect the TC to the new router by Ethernet. You would also want to reconfigure the TC as a bridge and disable its wireless radios.
You can do both of these using the AirPort Utility, as follows:
Run the AirPort Utility.
Select the TC, and then, select Edit.
Select the Network tab.
Change Router Mode to: Off (Bridge Mode)
Select the Wireless tab.
Change Network Mode to: Off
Select Update and allow the TC to restart. -
I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.
Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you. -
Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
I am unable to connect to my internet via. wifi on my Playstation.
I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
Please help?
I tried being the most descriptive I couldI am only able to connect to the internet on my main computer.
What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
When you open the airport utility on the main computer.. click on the TC what errors does it show?
They will list in the summary.
What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
What model TC do you have??
You can slow the LAN port down or specify the actual speed in the Gen1-4. -
Do i have to hardwire connect the Time Capsule to my router?
do i have to hardwire connect the Time Capsule to my router?
My plan was to just add it to my wireless network and keep it for security away from my mac and in a completely different part of the house.You can but it is a NOT recommended method.. it will be slow and unreliable.
-
Airport Time capsule behind cisco router download speed
My airport time capsule is connected to the internet in bridge mode via a cisco router.
The cisco router provides a 99Mbps download speed. However, when I " bridge" my time capsule in between (wired) the speed slows down to 9 Mbps.
I have already tried to assign a static DHCP IP to my time capsules MAC address and disabled DMZ for that specific IP address, but am failing to get the speed up to par.
Any suggestions?I have used Time capsule 1.5 year behind a copperjet modem on ADSL, no problems.
Changed provider and am connected by cable with new cisco modem including router.
So the set up looks like:
internet>cisco modem/router>airport time capsule>macbook pro
The cisco modem without airport time capsule is working ok: when logged in speed is 99 Mbps as it should be (wired and wireless)
Connecting cisco router with UTP cable to time capsule and time capsule with UTP to macbook slows down speed to 9 Mbps
(time capsule in bridgemode)
Specs:
Macbook pro OSX yosemite
Airport Time capsule 2TB 2013 (v 7.7.3)
Cisco modem/router:EPC3928
Maybe you are looking for
-
Hi, There is a scenario that there are some branches which are considered as sales office. when spares materials are sent to this branches the stock should be available at this branch levels . To do this storage locations are made for each branch. Bu
-
How To Use Logic Express To Change The Speaking Voice
I'm new to Logic. I've been messing around with it for awhile. I can't seem to find what I'm looking for. I'm looking for a filter, or a way to setup a filter that will automatically change the speaking voice (for podcasts etc.). I want the voice to
-
How to get values of Dialog Overview node in RZ20
Hello, In ECC 6.0. In T-code RZ20 when i clicked on node EC6 it showed me a tree structure with following nodes below EC6.0 System Configuration \System Buffers Change & Transport System File System Operating System Performance Overview System Errors
-
Hello Experts, I have one requirement in which I need to include one tab from t-code MM02 to MM12. How can I achieve this? Can it be achieved through configuration (using spro) Or there are any User exits in which we can enable
-
Where is 'recording level' slider in new GB?
In GB 6.05 there was a slider to adjust the input's recording level. I can't find it anywhere on the new version. I know there's a track volume level but that does no good if what's recorded was clipping to begin with.