I have a time capsule with a ton of media on it. Will Apple TV recognize and play the media files without itunes?

I have a time capsule with all my mdeial files. Will apple TV play the amedia files with out a need for pc or Itunes?
Thank you in advance

rfromla jolla,
What I'm hearing now is that any NSA still needs some iTunes interface to "go through". I'm going to use iTunes on my iMac as the pass through. I keep it running just about all the time.
You can use the little Apple Mac mini fine. If I were rich I'd do that.....
Oh well.....

Similar Messages

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data in addition to backing up the hard drive?

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?

Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?
Yes, but if you move the "original" data on your iMac to the Time Capsule....then the "original" data is now on the Time Capsule disk.
When...not if...the Time Capsule disk has a problem, you have no backups for this data.
Perhaps a much safer plan might be to add an external hard drive attached directly to your iMac. Then, move the data to that drive from the iMac.
Now, Time Machine will back up both your iMac and the external hard drive so you have "originals" on one drive and backups on another. Would that plan work for you?

Have 2009 time capsule with 6 month old iMac very slow cox said i needed to replace with a new time machine with newer wifi ??

have 2009 time capsule with 6 month old iMac very slow ...cox said to replace with new router or extreme with new wifi ???? confused

Replace the Time Capsule with a new one or replace your router with an Airport Extreme Base Station that has faster Wi-Fi. Or you could just connect your old Time Capsule using an Ethernet connection from the Time Capsule to the computer's Ethernet port.

I am trying to back up on my new time capsule with my mac book pro. It's been 25 hours and only done 5.8gb of 129gb. any advice. Thanks

I am trying to back up on my new time capsule with my mac book pro. It's been 25 hours and only done 5.8gb of 129gb. any advice. Thanks

You can backup 2 computers as long as the TC has enough space.
Your access might be restricted if you set it up with users.. you must log in with the correct user to get access to the files.
Otherwise you should be able to see both sparsebundles just with finder.
Look at Pondini's excellent FAQ
this one in particular may help
http://pondini.org/TM/17.html

I have a Time Capsule with the internal disk drive. I have copied my photos and music to the internal drive. Is it possible to access the photos etc. using my Apple Tv to see it on my TV, iPads etc? on my home WIFI.

I have loaded my Time Capsule with my photos, videos, music etc. I want to access these using my Apple TV on my home WIFI for display on my tv's, and Ipads, Has anyone figured out a way to do this? I can do it by access to my Macbook but that's not always convenient.

If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.

I have a time capsule with my iTunes library from a previous computer. I now have a new computer with new songs on my iTunes library. I'd like to retrieve my songs from my iTunes library which is stored in the time capsule. How do I do this?

Hello there. Wondering if there's any way I can retrieve songs that are stored in my time capsule that was backed up from my old previous computer?

Actually you always use ethernet..
MBA does not come with ethernet port.. but apple sells both a cheap usb to ethernet and a much more expensive and much faster thunderbolt to ethernet adapter. With ethernet to eliminite this silly situation of setting up wireless over wireless, so if you make any change you instantly drops you off the network. Like cartoons of people sawing off the branch they are sitting on.
But you can reset.. no reset will do anything at all to the material on the hard disk. You must deliberately erase it.
Read the info because you may only need to do a soft reset. That is hold the reset for 1sec (2-3sec is fine) as long as you don't hold it for a full reset.
http://support.apple.com/kb/ht3728
Even a full factory reset will not harm your files in any way, (or any further!!)
I am "concerned" that you have no backup to vital files on your TC. That is not wise. TC are no more immune to failure than any other hard disk.. (actually latest ones use the cheapest green WD drives money can buy) and keeping files in only one location is a receipe for disaster. An external drive is much more accessible.. cheaper and tend to be more reliable. There are too many things to break in the TC.. it is designed as a backup target for TM. Not a file store.

I have trouble getting my new Apple TV 2 to work to the internet. I have an Imac with OsX 10.6.8 using a 3G modem to connect to the internet. I have a Time Capsule with Airport. I can't get the Apple TV to see my internet connection

I have an Imac with OSX 10.6.8 dual intel core.
Apple TV 2
Timecapsule
3G modem connected to iMac for internet access.
I have tied to get Apple TV2 to see the inernet but it does not seem to see the inernet connection either via the Airport network or even if I connect it directly with a ethernet cable to the Timecapsule or the iMac.
I have tired to set up Home Sharing but it doen't see the Itunes Store so no go.
I don't have wired internet but it is probably something to do with using a 3G modem
Any tips on how I can check if the TV coonect to internet and what to do about this problem?
I was trying to connect my HD TV earlier using a WiFi USB modem but it could not see my iMac. Apple Support told me to buy an Apple TV but that is not helping as I can't see anything there either.
Regards from Michael

Thank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
I have reset the printing system, a few times for good measure but nadda.
I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date. I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable. It apparently hasn't worked either
Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac. I am so completely clueless
The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
I think it's the set up of my Mac? Our maybe a glitch in the network settings?
Thanks again

I have a Time capsule with 2 laptops using the internet wireless from it.

My desktop is wired to the Time capsule and it allows me to access the internet but my laptops cannot access the internet. I have reconnected everything but nothing seems to work. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Time Capsule with BT Home Hub - 9 hours of trying to set up and counting...

Hi...I am at my wits end having spent two long evenings trying simply to connect a Time Capsule to an iMac. We have pored over the instructions, read all the postings in all the forums, probably in the entire world (OK, slight exaggeration) and tried every possible combination, and still we end up with a non-responsive Time Capsule (blinking amber light), and the Airport software saying "Waiting for the Time Capsule to restart" in a perpetual loop. The issues may well be around compatibility with the BT Home HUb, but there again they may not. There are no clues about why it fails so consistently in every combination. For the record, these are the combinations we have so far tried: ethernet connection from WAN port on TC to Ethernet port on Home Hub...A wired connection is established successfully. But then immediately the wireless connection wizard starts up, we can't turn it off, and the wireless connection wizard fails. We have tried it in all three combinations of the Wireless wizard. The end result is always the above, the blinking amber light.
We have tried adding the TC without any ethernet connection being involved in the first place. This was the most promising, we actually finally got a green light on the TC itself, but, crucially, NOT in the Airport software: that just hung in the same perpetual loop saying "waiting for Time capsule to restart", even though it CLEARLY HAD RESTARTED (because it gave us the green light). So, after about 9 hours and counting trying to get this "out of the box" solution simply to be recognised by a Mac computer, let alone connected to any other devices in the house (heaven forbid), we are now at our wit's end. Does anyone have any advice?

hi cprelude, I have the same or nearly the setup as you a BT HH V1 and a 500gb timecapsule this is hardwired to bt hh and works well so fear not it can be resolved. first hold the reset button on the HH with the TC disconnected, then while the HH is restarting unplug the TC for a couple of mins then replug inyour TC with the reset switch at the rear pushed in and then let the TC restart and plug in the ethernet cable to thr HH then use Airport utility to connect to the TC. then if all goes well you can set up two wireless networks first being the HH and the second the TC 5ghz. if I was you I would do the first backup on TC via ethernet as the first wireless backup can take hours and hours depending on the amount GBs you already have on your hard drive
good luck
john

Time capsule with Windows 7

Hello,
I have a Time capsule, with one Tbyte disc, connected by ethernet cable to a Windows 7 computer. I cannot open the disc. It says "Disc not accessible, access denied".
It works perfectly with another computer under Windows XP.
Does somebody have an idea?
Also I did not find how to update Airport and Time capssule software.
Thank you for help
Palou707

Just an update to the above i can now no longer see the time capsule in network places!! All i have done is retstarted!!! I can still see the time capsule from my mac and access it!!!

Accessing the hard drive of a Time Capsule with Windows XP

Hi,
I have a time capsule configured in client mode so that I could share a printer and a hard drive on my existing wireless network. I now can print from both computers and I can acces the hard drive with the mac that I used to configure the time capsule.
But I can't find anyway to access the hard drive from the pc. When I use AX to connect as a guest it's giving me an error "user unknown or session desactivated contact the admin (67)". (The config is authorizing guests so it should work)
What's wrong ?
Thanks for your help,
Julien

FireWire Target Disk Mode requires two Macs.
Can you remove the hard drive from teh PC laptop? If so, you can use one of these:
Newer Technology Universal Drive Adapter USB 3.0 - connects any 2.5", 3.5" or 5.25" drive
to mount the drive on the Mac. most Macs will read PC drives. You can't salvage applications but you may be able to recover data files.

Time capsule with internet connection problem

I have connected time capsule with my Airtel India Broadband modem. I am not able to access internet. When i see them in Airport utility Time capsule blinks in yellow and internet in stable yellow. Help required!

Open Airport Utility and select the Time Capsule. What does the Status show?
For Airport Utility 5.5.3 and 5.6, open Airport Utility and click Manual Setup. Check the Status.

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

I have a time capsule with a ton of media on it. Will Apple TV recognize and play the media files without itunes?

Similar Messages

Maybe you are looking for