I have a Touchsmart 512UK and microphone not working

On using Skype and sitting infront of my computer and talking it has been no problem. Since an overhaul by a computer expert! this is not happening and he says I have no microphone, so how was I able to do this??

See Kappy's previous write-up.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
for got security questions: Apple Support Communities
natalia2000 wrote:
yes i am entering the card code and when i do it states that i able to use my card because of my security questions not being answered correctly then i reset it and still not able to use the card

Similar Messages

HT201412 My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

Try resseting the network settings in settings>general then go to reset a the bottom.
Then reset NETWORK settings.

I have a ipod 5 and its not working and i will like to get it fixed and i want to see if i still have my warranty

I have a ipod 5 and its not working and i will like to get it fixed and i want to see if i still have my warranty

Check Your Service and Support Coverage: Apple - Support

Internal Webcam and Microphone not working after Screen Fix

I own a HP Envy Spectre XT Ultrabook, and last week I tried to use the webcam and the microphone for the first time in a few months.
However I was shocked to find that Skype kept saying that the webcam was not detected. The microphone also could not register any sound.
Device Manager did not show any imaging devices or the webcamera, even after setting it to view non-present devices.
A check using msinfo32 did not review the webcamera either, and there were no problem devices.
Control Panel >> Sound showed that the Internal Microphone using IDT High Definition Audio Codec was enabled and working, however it could not detect any sound. All drivers are checked to be up-to-date.
I suspect this has something to do with the screen repair last month which a HP on-site technician came down to replace my screen, although I cannot be 100% sure. Although the screen is now working, the technician did not do a good job reassembling the screen - the bottom left corner of the screen cover has not be able to attach properly to the screen.
I have gone through my BIOS setup to make sure that there is no webcam disabled.
I have tried rolling-back and reinstalling the drivers for the microphone but it did not work.
I have tried uninstalling CyberLink YouCam (laptop preinstalled webcam software).
Please help, these two components are very important to me as I am going overseas soon. The laptop is still under warranty.

Hey ajun,
Thank you very much for the information!
For troubleshooting your Webcam, I would suggest taking a look at the document Webcam Troubleshooting (Windows 7). I would suggest the two options Video does not appear in your webcam software (such as YouCam, Skype, Messenger, ect.), and Webcam is not listed in Device Manager.
For your internal microphone not working either, please take a look at the document Resolving Microphone and Line-in Problems (Windows 7). From this document, I would suggest following the top two symptoms.
Please let me know the outcome of these troubleshooting steps.
Good luck, and have a great day!
I worked on behalf of HP

New i6 is not working with Acura - have tried a reset and still not working. This is urgent as I must be able to connect via bluetooth in my vehicle

My i6 is not connecting to handsfree in vehicle - have reset a few times-still not working as handsfree. Can dial but then goes to device. Also continues to disconnect.
Verizon carrier
Acura MDX 2014
i6
ios 8
Please help ASAP!

You have to go to autherized iPhone agent.

Brand New TouchSmart 300 internal microphone not working.

I have been trying to get my internal microphone to work with Skype.
I have done all the tests suggested on this forum and everything says that my microphone is working!
When I record anything I get a muffled noise not anything like speech.
If I record on Windows 7 Sound Recorder the green bar stays at 25% but no sound.
Is there a simple fix as really do not want to take it back to the shop to have it sent away under warranty.
This question was solved.
View Solution.

Re-install Skype, and the drivers.
Reinstall drivers from Recovery Manager or download them from your update site at http://www.support.hp.com .
You can find your PN by pressing CTRL + ALT + S.
Update skype, or reinstall it, as I'm sure the latest version is compatible with Windows 7.
After you perform these tests, please post with the results.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Satellite A200 - Headphones and microphone not working (Win XP)

I have fully operational Windows XP with everything working just fine. However, today I tried to connect a microphone to the notebook, the software noticed it, muted the internal speakers, but there is no sound in the headphones whatever I do. I tried if the microphone jack is all right only to find out that I have the same problem - the realtek software notices me, that I plugged in a microphone, but doesnt record any sound.
I would be more than grateful for any help.

Are you sure that you have checked all necessary sound settings?
Im not Satellite A200 owner but Ive got a similar Satellite A series and I have installed both OS (Vista & XP) on my HDD.
From my knowledge you have to check different microphone settings in the sound & audio options.
In Control Panel you will find the Sound & audio devices. Choose it!
Then choose the tab called Audio.
There you could find the area Sound recording which provides information about possible devices for sound recording.
First of all you should check if the Volume settings are set to a higher level.
Secondly check if a right device was chosen (in my case its a Realtek HD audio input).
In the other tab Voice (near audio tab) you can test the voice recording too. This could be very helpful to check if the mic functions correctly
Please do this!
Bye

Speakers and microphone NOT working, all devices said to be working

Hello, looking for help. My speakers and microphone suddenly stopped working and I do not know why. Whenever I got to my volume control or drivers it says they are working fine and they are on the original settings. When I go to skype it says that it cannot access my sound card for both speakers and microphone. I have gone to the control panel and whenever I try to test the mic or speakers it gives me an error report that no test can be performed or that it failed. Please someone help!!?
Product name: HP Pavilion g6 Notebook PC
Product number: C2N50UA#ABA
Windows 8 64-bit

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59620.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the desktop Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if the microphone and audio are now working.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have downloaded PDF Converter and its not working properly

the pdf I am attempting to convert to edit is not working. I have converted it to all that is available and the lines are off in someplaces and some data is in the wrong place when I try to Move it I can't or it makes it worse. what can I do?

As Pat said, which PDF Convertor are you reffereing to here? Which adobe application are you using for the same? What's the operating system that you are using?

Vista x64 and Microphone not work

Hi folks,I've installed and am running Vista x64 and the sound is working fine but the mic is misbehaving. In the 'Speakers Properties', 'Levels' tab, I have the microphone set to 85 and unmuted. This way the microphone works but I get bad feedback and I have to listen to myself droning on through the speakers. I've tried muting & unmuting this but nobody can hear me speaking in Teamspeak. Am I condemned to having to blast my neighbours with feedback or is there a way I can talk through the mic and have my voice come through on Teamspeak instead of coming through my speakers Many thanksPete P.S. System is a 4gig, dual core, Audigy 4Drivers are the latest Vista ones from the creative site.Oh and it all worked fine on XP by the way

Go to recording properties, select levels and increase mic to 85. Also add 20db boost.go to speaker properties, select levels tab and mute the microphone.....Fixed..

I have a prepaied card and its not working

I have a prepaid card and it's not working

See Kappy's previous write-up.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
for got security questions: Apple Support Communities
natalia2000 wrote:
yes i am entering the card code and when i do it states that i able to use my card because of my security questions not being answered correctly then i reset it and still not able to use the card

No sound and microphone not working on windows 10

Hey, Since i switched to windows 10 my microphone stoped working, also i cant hear my caller. Sometimes if i play in settting and change microphone for mix source i can hear others. In other applications like windows sound recorder or razer comms everthing works just great. Should i try some older version of skype or what can i do? alredy resinalled my audio drivers. Im using laptop build in microphone.

Shkleinik wrote:
Hey! I had the same problem just after I installed Windows 10 Pro N. In my case problem was in invalid device order in speakers settings:1 Tools2 Options3 Audio Settings4 Show Advanced Options5 Speakers List control I tried to play with order of devices and this solved my issue Thanks - very helpful indeed. I'm now up and running with Skype on Windows 10 (no thanks to Skype or Microsoft of course!!)

My headphones don't work. I have tried other ones and still not working

My headphones stopped working. I have tried other headphones and tried resetting ipod to no avail. Any ideas?

Does it still work in iPod docks or other adapters where it plugs into the bottom? That is what happened to mine and there was nothing they could do to fix it. I had a friend who said that he found a kit online to do it yourself, but that's risky. If it's still under warrenty, just take it in to an apple store and they should replace it. I was given the option to trade mine in for a brand new identical one for half price because I was past warrenty. They no longer made the 80g that I had anymore, so I ended up getting a 120g for the same price. I was prettty happy.

I have an activex prompted and still not working why not

I have called customer service earlier today to try and
resolve why my flash player will not show movies. I have had flash
player in the past and it worked fine.
Now I have prompted my system to allow activeX to "prompt"
and still now movie will play after it has been downloaded and
uninstalled and downloaded again and again.
Please help me.
/kc

There are two different versions of Flash for Windows, the '''''ActiveX''''' version for IE and the '''Plugin''' version used by Firefox and most other browsers.
1.Download the Flash Plugin version setup file from here: 
[http://download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe Adobe Flash - 32-bit Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/

Comcast Online Seems to Have a Broken Link and is not working!

Seems that when i sign into http://xfinitytv.comcast.net/ to watch online content, this is the message i receive: "Hmmm, we're having trouble finding that page.It's probably because the page has moved or is no longer available. If you typed in the address, you may want to double-check your spelling. If you think you've found a broken link, please let us know.Go to the XFINITY TV homepage." I only watch via online due to being out of the country for a month. Please advise!

sethascope69 wrote:
Seems that when i sign into http://xfinitytv.comcast.net/ to watch online content, this is the message i receive: "Hmmm, we're having trouble finding that page.It's probably because the page has moved or is no longer available. If you typed in the address, you may want to double-check your spelling. If you think you've found a broken link, please let us know.Go to the XFINITY TV homepage." I only watch via online due to being out of the country for a month. Please advise! The link you supplied worked for me, so I'm going to guess that since you said you are out of the country, that might be the issue. Sometimes content is only allowed to be streamed within the borders from where it was produced. The error message you are receiving might not be very helpful, but I think you are getting it because you are out of the country.

I have a Touchsmart 512UK and microphone not working

Similar Messages

Maybe you are looking for