I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.
I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.
I had this problem and what I did was: read the user manual. I was actually using the wrong buttons to put the Tri-BC200 on pairing mode. I also boot my I phone. Everything worked OK. Regards.
Similar Messages
-
I am unable to pair my Iphone 4 with my car stereo or hands free device. It worked preveiously; please help.
The item that was previousl paired is no longer seen by the hands free unit.
The new system, car stereo and Iphone see each other, but do not pair.
Hope this makes more sense and you have a fix!! -
Bluetooth connection with my hands-free device
Hello,
Several days ago the operation system of my Q10 was updated by 10.3.1.1779 release and now I have a problem with bluetooth communication with the built-in hands-free device in my car. My contacts app alredy is not recognized, so I cannot dial numbers from my contact's list and couldn't recognize a number who is calling. Also the numbers dialed haven't been memorizing...
Could you suggest any decision?Hi had a same problem, after upgrading to 5.0.2 on my D6633 with my Honda. I have reset the phone and as well deleted all other devices I use at home (MAP-S1, SRS-X9) plus uninstalled SongPal application that controls them and all working now. This THROW function is usless only cosing problems
-
Hands Free Devices for Complaince w/CA Law
Now that California has adopted a law effective mid-year that only hands-free devices can be used while driving, what is Apple offering in the way of hands-free dialing and access (other than a plug stuck in the ear)? Or are we out of luck here?
mikesobay wrote:
Now that California has adopted a law effective mid-year that only hands-free devices can be used while driving, what is Apple offering in the way of hands-free dialing and access (other than a plug stuck in the ear)? Or are we out of luck here?
It already comes with one: the earphones have a mic built into the cable. Just use one in your right ear so that you can hear external sounds with your left ear. -
Can I use my Bluetooth hands free device to listen/watch videos on touch 4g?
I know I can connect my motorola Bluetooth hands free device to my touch 4th gen, but does anyone know what setting to change I order to listen to music and videos through the device?
Go to Settings/General/Bluetooth and sync up the device there. Once done, you should be good to go,...
-
trying to download free trial. creative cloud screen comes up with turning circle in middle. after 2 minutes the screen just goes away and no evidence of download
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430 -
My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?
You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My iphone 4 can make and receive calls but I cannot hear the person on the other end...they can hear me. I have tried plugging headphones in and resetting...any other ideas?
If you need to use the phone now, try using speaker phone until you can take it to an Apple store and have them further look into the problem.
-
When trying to open a word document, I get the error message that PowerPC applications are no longer supported. What can I do?
Thanks.IMHO the free apps are a band aid fix. If the OP uses Office on a regular basis he will need to upgrade anyway. Personally I have used neooffice and found it substandard however that was just my take. I haven't tried Google's solution.
We both forgot to mention the OP could also use Pages and Numbers to open their Word and Excel files. If he uses Entourage then Mail and iCal would be viable substitutes. -
I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?
Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi -
I have the latest version of Firefox yet I am still getting an error message that says photoshop is no longer supported on my platfrom and thereofre it's not downloading.
Please give a bit more system details. Which OS and version are you on? Is it 32 bit or 64 bit. Try downloading the Creative Cloud App if not already installed from: https://creative.adobe.com/products/creative-cloud. You can choose to install PS from withing this app and need not rely on web page.
Regards,
Anirudh -
Just updated to ios6, tried to update an app and now its stuck "waiting". Like that for 24 hours, mail is OK, web browsing OK but cannot unblock the apps thing. any ideas?
Try update using iTune (Check for Update; see bottom right)
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/52351097ee11e908a25 cdaa4c9483fdd_zpsbaeae828.jpg -
Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks
Well Lion does not support power PC applications. They only way is to upgrade the application, or if your have SL disks, reinstall SL.
-
I am running intel core 2 duo on i Mac. The download photoshop cloud trial version, tells me that my system is no longer supported. Really?
Maybe it is your OSX, what version are you running?
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)** Even 256 MB works for OpenGL but not 3D
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.* -
I just bought a new mac mini, tried to install CS2Premium and it says it is no longer supported...help, please
You cannot install CS2 on a new Mac Mini running OS X Yosemite. CS2 is far too old.
CS2 was written for older PowerPC based Macs running OS 10.3.8 or earlier.
Modern Macs use Intel processors which are not compatible with PowerPC software.
Furthermore, Yosemite no longer includes Rosetta (a utility formerly included - but long discontinued - by Apple in OS X to run PowerPC applications on Intel Macs).
You'll either have to buy a new full version of CS6 or join the Cloud.
Maybe you are looking for
-
When I go to finder and view as columns so that the right column will open a preview of the file, I get the endless spinning graphic and when I go to Force Quit, it shows that Finder has stopped responding. When I use Finder in any other view mode,
-
Test Cases required for BW Statistics to test in QA annd DEV.
HI All, I am currently working on a support Project. My client has completed installing of Bw statistics in DEV and transported it to QA way back in 2006.Currrently before moving the BI Statistics data to PRD we have to test it in DEV and QA. How to
-
Help...Nokia N8 Charger Model No. ?
pls guys... can anyone tell me the nokia n8 genuine charger model no. ? Nokia N8 Battery Model - BL-4D i need fast charger !!!
-
Windows Server Backup - 0x80042407, seriously?
I installed server 2008 on a test server with 4x250GB drives in a RAID5 array. Windows was installed on a 60GB partition, the rest of the array was left as free space. After installing updates and drivers, I decided that I wanted a RAID10 array. Thi
-
Hi, We have a oldfusion 9 installation with Plesk11 and facing multiple problems: 1- Coldfusion administrator opens with broken images as shown in the images attached. 2- We can't see any option for the updates in the Cf administrator 4- The font man