I have a WD MyBookWorld NAS  I had to change the IP address so how do I re-sync iTunes to pick up the device. The device is visible but when I click on it to display the contents i just get the spinning icon no content

Hope someone can help
As stated in the title I have a WD MyBookWorld NAS and it used to work well with itunes, it always came up in the shared area
I had to change the IP address on my NAS and now the NAS is displayed in the shared area but when I click on it for the contents to be displayed I just get the spinning "working" icon
I can access the unit via windows and my SONOS system but not through itunes anymore
Can anyone help please

Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID?   (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud.  Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)

Similar Messages

  • I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

    I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
    Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

    The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
    Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
    In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
    If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • When I go to itunes, my device is there, but when I click on it I get a white screen. Help?

    When I go to itunes, my device is there, but when I click on it I get a white screen. Help?

    Try here:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    ( or the link in the above for XP)

  • HT1338 i can not update software 10.8.2 to 10.8.3 , when i click on update box to start updating i just get a long waiting and at the end says :the error occured . what is the problem?

    i can not update the software 10.8.2 to 10.8.3 , something block the process and it dosen,t work , how can you help me?

    Sometimes, the OS X 10.8.3 App Store version gives problems. In your case, download and install 10.8.3 from the Support website > http://support.apple.com/kb/DL1640 It should update Mac OS X without any problem

  • Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

    Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

    I came up with an alternative solution.
    Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
    When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

  • I have itunes installed on computer but when I click on the itunes shortcut it says it has stopped working, tried to update and it said it had done it but still coming up with itunes has stopped working. Don't know what else to do?

    I have itunes on my computer and haven't used it for a while and went to click on shortcut and got message that it has stopped working so tried to update, followed all promptsd and it said it had been installed but when i clicked on shortcut again came up with same message. I have tried to uninstall and re install still get same message. Don't know why or what to do? Also tried to set up my dads Ipod Nano on his computer and it wont accept the Australian area code? ????Help Please going insane

    Does iTunes not see the phone?
    If not, make sure you're running the current version of iTunes.
    If you are running the current version and it still doesn't recognize it, see this: http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US
    As for iPhoto, you will have to purchase a newer version. It's not a free upgrade. Or, you can use Image Capture, which is built into OS X, to import the photos.

  • After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

    I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
    I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
    However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
    Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
    I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
    I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
    Any suggestions much appreciated!

    Maybe these will help:
    https://discussions.apple.com/message/17677533#17677533
    https://discussions.apple.com/message/18324129#18324129
    https://discussions.apple.com/message/18203126#18203126

  • HT1386 I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi.  How do I change the WiFi computer associated to my iPhone?

    I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi.  How do I change the WiFi computer associated to my iPhone?

    Hi Terri571,
    Welcome to Apple Support Communities.
    See these steps for setting up Wi-Fi syncing between your iPhone and new computer:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    Wi-Fi syncing
    Open iTunes
    To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
    In the Summary tab, select "Sync with this [device] over Wi-Fi".
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
    The iOS device is plugged in to power
    iTunes is open on the computer
    The iOS device and the computer are on the same Wi-Fi network
    While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
    Click Apply or Sync to sync the iOS device.
    If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
    Best,
    Jeremy

  • I have had to change my email address/Apple ID. my iPad recognisIes the change of id but on my MacBook Air, iCloud just keeps asking me for a password for the old email address/account. How can I get iCloud to recognise the new details? Help please!

    I have had to change my email address/Apple ID. My iPad recognises the new detail in iTunes and iCloud but when I go into iCloud through my MacBook Air, it requests a password for the old email account which I can no longer use. There is no Option to be able to change this email/ID detail as I cannot get further than the password request. Can anyone help please - this is driving me insane?!

    Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID?   (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud.  Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)

  • I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

    I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

    Hi Noob Søren
    There are a few things that are confusing in your question.
    As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
    You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
    I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
    You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
    Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
    If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
    Hope this helps
    WN

  • I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

    I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

    I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
    Mike Moore
    Corvallis, Oregon

    mikem
    Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
    Under the Input tab, make sure that you have your microphone selected.
    Please let us know the outcome.
    Thank you.
    ATR

  • TS1702 my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as

    my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as well. Please help I have set-up over 10 ipods and differents generations and have never had this issue like this, I even have all ratings ristriction unchecked and payment info in itunes so i need help please

    but i could download on others ipods in same gen, facebook and ice cream tower, everything i look up and try install always says that for apps so your saying that i can not ever download any apps to this ipod ever againÉ

  • Why does my iphone say i have a message but when i click on the app i dont have one and if i get out of the app it still says the messages are there.?

    When i go on my phone it says i have 3 new messages but when i click on it i really dont. I turned off and turned my phone on 3 times and it still says i have 3 new messages how do i stop that. Without actually turning on the bager icon thing that pops up on the app.

    Hey there Samimanis_.
    It sounds like your notification for messages is showing that you have a few mesages but when you go into the app, there are no new messages. I would start by signing out of your Apple ID in Settings > Messages. Then close the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone, sign back in, and try again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, I would next backup your device to iTunes, and restore it:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I have thumbnails in my iPhoto library but when I click on them the screen is black

    I have thumbnails on my iPhoto library but when I click on them the screen is black.  I have had my computer in 2-3 times for this issue and the library is corrupt, or so I was told.  This doesn't make sense since the photos are obviously in my library some where.  Any thoughts what is going on?

    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    and select the library you want to add from those in the selection window.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.

Maybe you are looking for