I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkr

So am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck!

Similar Messages

I have switched the sim card from one iphone to a different one, and i added my music from my old phone to the used one, now the old music on the used phone won't delete. im really frustrated and annoyed please help

i have switched the sim card from one iphone to a different one, and i added my music from my old phone to the used one, now the old music on the used phone won't delete. im really frustrated and annoyed please help

Do you just want to delete the music or wipe the whole phone since you've switched to the other one?
If you plug the old iPhone into your computer you can remove stuff via iTunes or remove stuff directly from the iPhone too.

Can I export my sidecar files to two or more hard drives at the same time from one computer?

Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?

Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that.

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

Hi Drgeert-
The hub may not be broken per se, but Apple has made adjustments to the limits on current that can be drawn from ports.
You probably need a new hub.
These may be helpful and/or interesting:
USB: High Bandwidth and Isochronous Devices Must Be Separated
USB Product-Specific Details
Luck-
-DaddyPaycheck

HT1386 After downloading music to my Playlist, when I try to sync the music to my IPod, it gives the error (The IPOD cannot be ejected because it contains files that arer in use by another application. What does this mean?

After downloading songs to my Playlists, when I try to
sync the music to my IPod, an error msge says
"The IPod cannot be ejected because it contains
files that are in use by another application".
What does this mean??

- Terminate the sync
- Reboot the computer
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try again. If still problems try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP\
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I have recently bought a second I phone4 and have the same apple ID on both of them, strangely I noticed the messages sent from one phone appearing the other one along with any pictures I sent from one of my Iphones. Is it possible to see the same msgs.

I have recently bought a second I phone4 and have the same apple ID on both of them, strangely I noticed the messages sent from one phone appearing the other one along with any pictures I sent from one of my Iphones. Is it possible to see the same msgs.

You need to setup different Receive At addresses for iMessage.
If you don't want the same pics on each, turn off PhotoStream.
User Guide

I have two users on my iMac, i want to transfer the font book from one to the other ?

I downloaded a bunch of fonts on my first User profile, now I don't use it because of problems and I now use a new profile.
How can I get the font book from one user to over ride the other one ??
thanks in advance

Font Book is an application available to all accounts.
There are three Font folders (provided by OS X)
/System/Library/Fonts
Contains fonts essential to the proper working of the OS and various included applications.
/Library/Fonts
Contains the standard set of fonts provided with the OS version, and is where you should put any fonts that you want to be shared by all accounts
~/Library/Fonts
Is the folder in each account. Fonts in here will be available only to that account.
Log into your old account and transfer the fonts from
~/Library/Fonts to /Library/Fonts
"/" indicates the root (Macintosh HD), "~/" is shorthand for your user folder.

How to copy the Pricing conditions from one Distribution Channel to another

Generally we use VK11 transaction to create conditional records .
but I Need to Know whether is it Possible to copy the Pricing conditions from one Distribution Channel to another with same name and same internal Characteristics .
Since we have around 70+ of Condition type with different parameter Sequence.So Instead of Going for BDC whether is there any standard Funct Modules/programs/BAPIs to do this?
How to make a copy Condition types from One Distribution Channel to another.
since SAP has already provided to copy conditions from Customer to customer.
Likewise i need to know whether SAP is facilitating for these feature also.
Iam Dubious in this issue.
Hope Fully looking for the answers.
Harish.N

- IDOC_INPUT_COND_A (you can create IDOC, but also call directly)
- call transaction / batch input (use transaction XK15, as used by LSMW)
- use group of function modules RV_CONDITION_COPY, RV_CONDITION_SAVE, RV_CONDITION_RESET + commit.
if you search SDN on 'RV_CONDITION_COPY' you'll find more info I believe.
Someone mentioned BAPI_PRICE_CONDITIONS as well.

Copy the inspection result from one lot to multiples lots!!

Hi SAP expert,
I want to copy the inspection result from one lot to multiples lots, currently i know how to setup the copy to another lot(SAML Response from SAP ID Service ) , but i dont know to do to multiples lot.
¿Someone can help me?
Thank you

First you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
A.P.

Running two stepper motors at the same time from one port

Hello,
I have to run two motors at the same time - one used to move a linear ball screw and one to turn a grip. I am doing tension and torsion testing on small wires, but tension and torsion have to be done at the same time. I also have to build in the ability for each motor to take multiple steps, ie. have a motor take x number steps at y velocity and then move x number of steps at z velocity. Both motors need to be able to do this. However, I am having problems getting the motors to run at the same time and to take all the steps. The motors are connected to two RMS Technologies R356 controllers. Both of the controllers are then connected to one RS485 to USB converter card, and that card is connected to one of the USB ports in the computer. Currently, I pass an array of commands to two for loops each containing VISA read and writes. I've attached the vi to look at. All of the timing stuff in the code is because a new command cannot be sent to the controller before the motor is done executing the previous command. If commands are sent right after one another, the controller will only execute the first command and then return with an error.
Does anyone have a suggestion as to what I am doing wrong?
Thanks in advance for any help.
Solved!
Go to Solution.
Attachments:
Motor Controller (Sub VI 3).vi ‏41 KB

I'm not too clear on exactly what you are trying to accomplish or some of the details.
Are there equal number of torsion and tension steps?
Is there a pairing between a torsion and tension? For example, you want to tension and torsion simultaneously, but those two together make a complete step?
Do you want to wait until both the torsion and tension have completed before moving on to the next torsion/tension pair?
Is there any time delay you want to hold at before moving on to the next step.
When working with state machines, it is important not only to define the states, but also the logical stepping from one state to the next, or alternatives based on conditions. It could be flowchard, but sometimes people call them state charts.
Right now your latest posting has goes to "Write to Motor" event though and will wait there forever because there is nothing in the queue to write out through the VISA port.
Let's assume your first state would happen to be Enqueue Tension (in order to get something in the queue), you will actually queue up all your tension commands at once with the For loop. Then i will be 1 less than the size of the array it always will be because for an array size n, i will go from 0 to n-1 on each iteration. So your false case will run and you will go to "Write to Motor". Write to Motor will run and dequeue the first command then go to Waiting for Response. Waiting for response will iterate through the while loop until 66 or 67 comes back. I assume only 66 will come back for tension since you have yet to write a torsion command. Once that comes back, it will go to Enqueue Tension again and insert a whole other series of commands. Then go back to write Motor and will take out the 2nd queue element from the first set of commands your wrote. It will stay in a Tension mode and the Queue will grow endlessly putting in a whole new series for each element that you dequeue.
A state machine is the way to go, but I can't really sketch one out for you because I'm not sure exactly how your applications is supposed to work. If a tension and torsion command are paired together, perhaps you should just queue them together and write them out at once. But the key thing is to sketch out on paper your application and flowchart exactly how the program should progress from step to step.
PS: One other thing, make sure you wire the queue reference wire through all states.

Photos app in my mac is not able to open the iPhoto library from my external hard disk.

I am using iMac (21.5-inch, Late 2013) OS 10.10.3. i have 2 iPhoto library one on my Mac HD and the other on my External HD which i primarily use and which has all the latest photos in it. Now with the new update to photos app in Mac i am not able to open the iPhoto library from my external HD. I get the following error message please help.

i am not able to open the iPhoto library from my external HD
How is the external HD formatted? Is the filesystem MAcOS Extended (Journaled) as necessary?
Is theHD directly connected or by a networked connection?
Have you tried to set the "Ignore Ownership on this volume" flag?
See how to prepare the drive for storing an iPhoto Library on it in this document: iPhoto: Sharing libraries among multiple users
Which version of iPhoto created the library? If it was iPhoto 7.1.2 or earlier, download and run the iPhoto Library upgrader.
iPhoto '11 or later: About the Library Upgrader - Apple Support

Export or transport all the RFC destination from one system to another syst

Hi
Is there any method to Export or transport all the RFC destination from one system to another system

Hi,
the information is stored in table rfcdes.But there are also some other RFC*-tables which have some relations. Nevertheless the RFC-connectons will possibly not work anymore in the new system(depending on the release your systems are), as the passwords are stored in the Sec store with system-dependent keys.
b.rgds, Bernhard

TS3274 my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the original one was not there.... some songs were in fact there but not clickable ( it was there only gray)..anyone kno

my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad

my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

Hello, thank you for your prompt answer. I did have an idea that Home sharing might be the answer but could not quite figure out how to do it. I have enabled home sharing in my iTunes account, put in username and password, clicked on creat etc. But the homs sharing icon doew not appear in the left side of iTunes. So I got stuck. Any further ideas?

When I sync my iPhone 5 to Outlook 2010, the email addresses that I have listed as Email 1 for any given contact in my iPhone will be automatically moved to Email 3 in the Outlook file. Is there a way to fix this?

When I sync my iPhone 5 to Outlook 2010, the email addresses that I have listed as Email 1 for any given contact in my iPhone will be automatically moved to Email 3 in the Outlook file. Is there a way to fix this?

iCloud email supports 'plus' addressing. http://en.wikipedia.org/wiki/Email_address#Address_tags
So your friend could just add '+research' to the username part of your email address, and you setup a rule at icloud.com to put all emails sent to that address into a particular folder.
For example:
[email protected]
There's no way to do it without rules on the server though.

I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

Similar Messages

Maybe you are looking for