I have a windows 8 laptop that wont detect my canon mx472 printer.
I have tried everything according to the disc supplied, I keep getting a message that the printer could not be detected on the network. we have started the setup over and over again Please any help would be appreciated.
How is the printer hooked -up? WiFi or USB cable to a computer?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472
Similar Messages
-
i have a windows 7 laptop, and my itunes account wont log in, it is logged in on internet explorer on the website but when i come to log in on the itunes software on the laptop it comes up with error (-51) i defo have the right password, help!
fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing. -
I have a Windows 8 laptop which has been updated to 8.1. I'm trying to rename a new playlist in my itunes which I could change befor the last update which was very recent. It won't do it like it used to. Help, please! reetz58
yeah it is the gayest thing that happens :S what i do is turn off the internet, then open it, then turn on internet, then use it. :S OR make your homepage a tab.
-
I have a Imac 8,1 That wont boot.
I have a Imac 8,1 that wont boot.
3.06Ghz, Nvidia 8800
I believe i have 2 problems.
First this is what ive already done:
I ran an extensive hardware test, no problem
In disk utility I erased my harddrive and clean installed Mavericks,
Verified and repaired disk, no problems
Verified and repaired permissions, no problems
Disk boots up fine when running on MacBookPro through Firewire
Zapped PRAM/NVRAM plenty
After upgrade I can no longer boot into safe mode, Stalls after 25%
Can no longer use CMD-R
Can no longer use Apple Hardware Test
Doesnt seem like I can update firmware from disk by holding down the power button. not sure im using the right disk either.
These problems probably stem from running complex graphics on a windows 7 partitions I used to have.
First off I think my GPU is out. I get Thick Green lines down the screen that are not from screen damage straight from startup.
After Chime the apple logo pops up and loads but after a while the wheel stops and the computer will reboot moments after. Im hoping this is a Firmware problem and I dont have to replace my GPU. My computer has booted up with the lines before and I dont think its the cause for not booting but im no professional. Before I updated to Mavericks This Problem already existed. Can a failing GPU cause boots to fail?
During hardware test the green lines would go away and I would have a clean screen.
I loaded Mavericks from a USB drive from there onto the newly erased harddrive (32 Write erase). Everything was going great until I got close to the end of the loading bar for the setup and it froze. The colors on my screen displayed everything but with the colors messed up into a rainbow oval on the top half of the screen. I rebooted and suddenly I cant boot from anything. Harddrive, Install Disk, or USB
So I plugged up my firewire and got on a MacBookPro with Mavericks and erased the disk again. Then I installed Mavericks flawlessly and it will boot from the MacBookPro but not from the Imac.
When I boot in Verbose mode I get an error that says
BootCacheControl: Unable to open /var/db/BootCache.playlist:2 no such file or directory
Then
NVDAStartup: Official (im guessing thats my GPU)
and a bunch of SMC:smcReadKeyAction ERRORS
and Sandbox: authd(##) deny file-write & deny file-read errors
Im thinking I need a new GPU but I want to be absolutely certain before I spend anything on replacing parts.
Could this be a EFI Firmware Problem?
like a Firmware/boot data problem from a bad ESP (I dont know what is what really).
If all this is part of the GPU it would totally make sense to just go ahead and replace it if thats the case. But im no expert, What do you think?Very simple take it to an Apple Store or AASP and have it professionally diagnosed. Anything else would be guessing. Do NOT spend a penny on it until it is professionaly diagnosed otherwise you stand and excellent chance of throwing good money after bad.
-
I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkrSo am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck! -
I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?
try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.
-
Currently all my iTunes library is saved in the "cloud". I want to save it on my computer's hard drive. How do I do this? I have a Window's laptop.
Hello bfarrow1,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Access your complete iTunes music library at any time on all of your computers and iOS devices
http://support.apple.com/kb/PH2719
To download songs from your iCloud library to a computer:
In iTunes, select Music (below Library).
If a song is available for download, it has a Download button next to it. To download the song, click the Download button.You can also play a song that’s available for downloading by double-clicking it. The song downloads as it plays.
Best of luck,
Mario -
A few days after i've updated to iOS 8.1.1 my iphone 5s died and isn't turning on and its not charging. i have my legit charger that came with my phone and after 6 months it stopped working, i even have a charging case and that wont charge it. I google searched the problem and tried cleaning the charging port but still nothing! some please help
Please make a Genius Appointment and take it in for service.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?
Hello Fiona,
Congratulations on your new iPhone! You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected. Use the steps in the following article:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Thank you for using Apple Support Communities.
Best,
Sheila M. -
i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)
Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton -
I have a windows 8 computer that is connecting poorly via wifi and my Apple time capsule to the internet. My IMac an another windows 7 based computer are connecting fine. This started 6 days ago. And, the windows 8 machine connects well via a hard Cat-5 connection to the time capsule (I'm using that now) and worked well on a wireless netgrear system over the weekend.
I'm thinking an automatic firmware update may have caused this or perhaps i need the time capsule to use something other than a default address. Those are just guesses, but I could sure use some help. Thank you.It is hard to figure where the issue is..
Certainly if windows updated the wireless driver that can mess things up no end..
What update happened 6days ago?
What TC do you have.. ?? If it is flat one and you updated to 7.6.4 do a factory reset and reconfigure.
If that doesn't work roll the firmware back to 7.6.1 or even 7.5.2 as these are generally superior to windows.
There is no update for TC gen5 yet. -
I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!
Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app. -
i have a i phone 3 that wont start up past the apple logo can u help cheers
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
My computer wont detect my Canon vixia hf r400
Please Help me. My computer wont detect my Canon vixia hf r400 im running windows 8 and I tried everything from installing the drivers to the USB ports, I have my ports in legacy mode and still wont detect. I have USB 3.0 ports but I can't imagine it not being backwards compatible. What can I do to get my computer to recognize it. It only detects when I have a memory card in the camcorder but that is like just having the card in a SD slot on my computer. No software that come with it will detect it either.
Put the camera into AVCHD mode before connecting it to the computer.
-
I have tunes on my phone that wont sync with itunes
i have tunes on my iphone that since i reset my computer will not show in itunes library or play list even wont sync songs backinto itunes?
Redownload the purchases. Go to itunes and open the itunes store. On the right you will see some links, one will say "Purchased" with a "New" icon next to it. sign in and you can download all the songs again
Maybe you are looking for
-
HT201401 iphone wont open in itunes
Just installed snow leopard and now itunes wont recognize my iphone 4.
-
How to configure a printer in solaris 2.6 ?
Hi, I have a Sun Sparc 5 station running solaris 2.6. Can anyone tell me How to Install an HP LaserJet 4050 N (that uses Network Interface ) with this station? ans thanks a lot.
-
Send metrics of PL/SQL to SONAR with Job Jenkins
Hi, We are implemented Continuous Integration for PL/SQL using Jenkins and Sonar. We following one tutorial that we discovered on Web (Continuous Integration with Oracle PL/SQL, utPLSQL and Hudson – The Server Labs Blog). After following all steps, o
-
4th day in a row premiere won't launch, Adobe where is your customer service? Do they exist?
Bought elements and downloaded. When I attempt to click either the organizer or photo editor option from the they both instantly crash. I have not been able to open the program at all. Attempted to run as admin with no luck. This is a fully author
-
"You need to restart your computer" / Kernel Panic issue
Hi guys, Need your help. i have an mbp i7 13 inch model and just today i am experiencing this " you need to restart your computer" error. i read that this is a kernel panic issue/error. but what do i do? what's wrong? Below is what appears on the log