I have a Word file in square format. Converting it to PDF wipes the format and produces a document in portrait format.

Create a Custom Page Size with the same dimensions as your document within a new Joboptions file and then use that new Joboptions file when you convert your square document to PDF.

Similar Messages

After I have combined some files together to make them into one pdf, can I add and take out files?

After I have combined some files together to make them into one pdf, can I add and take out files?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

I just purchased a new iMac to replace our older one We are giving our older one to parents and want to wipe the HD. The discs I have for my old iMac is for version 10.5 but I have 10.6.8 currently. Is there a way to wipe the HD and keep 10.6.8?

I just purchased a new iMac to replace our older one. We are giving our older one to parents and want to wipe the HD. The discs I have for my old iMac is for version 10.5 but I'm currently running 10.6.8. Is there a way to wipe the HD and keep 10.6.8?

No. Wiping the HD will erase the OS on it.
(95074)

How do I keep the format in a fillable PDF, specifically the "$" symbol and the 2 decimal places?

I created a fillable form in Acrobat Pro and when we use it in Adobe Reader on the iPad, the preset format for money doesn't stay when the fields are populated, but if we email the filled form back to the iMac, the format is there and it's fine. Any suggestions? Do I need to do something with the original fillable form so that it carries over to the iPad?

I have been having a similar issue for a client's interactive PDF report that needed the "Show/Hide" feature in InDesign to reveal many acronyms' definitions in a "Pop-up" box when the acronyms were clicked on. Then the "Pop-up" boxes could be clicked on to close themselves using the same "Show/Hide" feature. While I have been going a little crazy the last FEW MONTHS scouring the forums and blogs (and just spent an hour and a half on the phone with Adobe's tech support staff that apparently only support desktops and laptops but have NO CLUE about the delivery of Adobe content via tablets and other mobile devices), I can say that a few things have been helpful - on the expert blogs (but sadly not in any of Adobe's support forums or call centers).
Buttons in interactive PDFs are NOT supported in iBooks or Acrobat Reader on the iPad.
Basic buttons, like navigational buttons (go to next or previous page) or submit, DO work in the "PDF Expert" app, which is $9.99 in the App Store.
So far, no matter which workaraound I have tried from the forums and blogs, the "Show/Hide" buttons still do NOT seem to work properly in even the "PDF Expert" app. (I see a highlight field where my buttons and pop-ups should be but no content in them - no text and no background - only a translucent highlight that shows that somewhere in there it's trying to work. The highlight fields even show and hide the way the buttons and pop-ups are supposed to, which is maddening!)
The only recommendation I could get from the Adobe tech support folks was to use InDesign and the Digital Publishing Suite (DPS) instead and publish an app through the iTunes Store.
Unfortunately that is NOT an option for me because my client's report is confidential and being sent to only a small group of less than 100 people.
I could bypass the iTunes Store and distribute the "Ad Hoc" method of attaching the .ipa file (the app file) to an email list of up to 100 people but my client would have to buy the DPS Enterprise Edition, which costs upwards of $20,000. (Yes, that's $20K in American dollars.)
There is NO option to distribute "Ad Hoc" with the Single Edition of DPS which comes with the Creative Cloud. I guess a lot of people ask that of the DPS forums and the experts give cranky repies that "No, it is just not possible with any DPS version less than the Enterprise Edition."
There is no middle ground on this yet but a lot of people seem to be asking for it. What's up with that, Adobe? No support for the small to mid-sized businesses for simple interactive brochures and reports that they don't want to release to the world, just to a select few?
The only solution I have found even slightly feasible is to create buttons that control "Multi-State Objects" (or MSOs) to behave similarly to the "Show/Hide" buttons and create a DPS .folio file from the InDesign doc.
I still can't recommend that my client pays $20,000 to be able to distribute his interactive quarterly report but I think I found a way around a small distribution.
You can share a .folio file with people through an email from the "Folio Builder" panel in InDesign. (See this help file: http://helpx.adobe.com/digital-publishing-suite/help/create-folios.html and scroll down to the "Share Folios" section.)
Apparently, this link is not permanent, but I haven't found an answer anywhere as to when it will time out. I'm thinking at least 3 months will be enough for my client for the time being until the next quarterly report comes out. Hopefully by then Adobe will have come up with a cost-effective solution for the small to medium-sized business that wants to publish interactive documents for the iPad or the PDF apps on the iPad will become mature enough to handle these slightly more robust interactive features.
I hope this was helpful to some of you trying to do something similar. If anyone has an elegant solution for the nearly-working interactive PDF on the iPad, please let me know. Thanks in advance!

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards.

I have transferred Word files from my PC to my new Mac Book Pro and some of the files cannot be clicked on and opened or even deleted because you can't select them. There are a variety of document files and pdfs etc. Any ideas ?

I have transferred word files form my PC to my new Mac Book Pro. Some of the word files are feint and will not open as you cant select them. Also you cant delete them either because the cursor wont highlight or select them. Any ideas anyone?

Have you tried looking at the file in list view in the Finder and seeing if they actually occupy any space? i.e. "Size"? There shouldn't be any problem with Office documents, Adobe pdfs, etc. If they migrated properly - did you use Migration Assistant or some similar utility?
Regards,
Clinton

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

When working on word file or watching a film on safari my screen starts flickering and then disappears

Dear All,
When working on word file or watching a film on safari my screen starts flickering and then disappears? Is it dangereus? What does it mean?
Thanks
FMirza

Go to another Optometrist and get a second opinion or see an Ophthalmologist.
Ciao.

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I cannot find information to help me change the orientation of a video filmed in portrait format but only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

I cannot find information to help me change the orientation of a video filmed in portrait format but it can only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

Thanks OT,
I tried the Export function but it would not allow me to choose the option of exporting to iMovie. I think you are right about needing Quicktime Pro. I opened iMovie and imported the clip from iPhoto and with some searching found the 'cropping, rotation' mechanism. So I now have a copy in the correct orientation. I plan to import/export it back to iPhoto because I want to have a copy on my iPhone to show people and I wanted to have it available as part of a slideshow I am making in iPhoto of my recent overseas trip. It is a pain that there is no simple orientating tool for the movie clips downloaded to iPhoto with the photos from the one camera.

Can I publish a PDF to the web and have others access it and use weblinks within the document?

Is it possible to publish a PDF to the web and have the viewers be able to click on links within the document. I'm asking because I found a PDF file WebQest online and it allowed me to click on the links. How did they do that?

What is your operating system?
Can you open that PDF with a text editor and check that the first four characters are '%PDF'.

I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. Is it Lion?

I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.

Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/

HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices.

I have seen that some of my Itunes music has not gone to the cloud, and I can't seem to refreash this? What should I do?

I have seen that some of my Itunes music has not gone to the cloud, and I can't seem to refreash this? What should I do?

First try:
iTunes: Finding lost media and downloads
Next
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For other music y will have to get them like you did before

I have a Word file in square format. Converting it to PDF wipes the format and produces a document in portrait format.

Similar Messages

Maybe you are looking for