I have a WRT54G Wireless modem with firmware version 1.02...

I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
What is wrong?

Which version of the WRT54G do you have? If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
The version of the router is important. Each version has a different set of hardware in it, so each version takes a different firmware.
You can only load the firmware that corresponds to your model and version.

Similar Messages

HI I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7. NOW I W...

HI
I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7.
NOW I WANTED TO UPGRADE THE FIRMWARE.
I CHCAKED OUT THE SITE I COULD'NT FIND THE DRIVERS FOR THE VER 7
EVERYTHING ELSE OTHER THAN VER 7 IS PRESENT ON SITE I WANTED TO CHEAK OUT WHEATHER THE VER 7 FIRMWARE ARE AVALIABLE OR NOT PLEASE HELP ME TO DO SO
THANKS
PRAVIN

hi helm
Thanks a lot for your suggestion i got the required farmware
thanks
prav

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have utility

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have airprot utility app downloaded on my IPAD - it shows the modem and the internet no connected?

Do you mean an Airport Extreme Base Station connected to a Comcast Modem?

I have a WRT54G wireless router. The issue I have is th...

I have a WRT54G wireless router.
The issue I have is that the "wireless network connection" icon light on my laptop stays on continuously and is constantly sending and receiving data even when nothing is open...no Outlook, no browser, no programs.
I have another another desktop PC that is connected thru the same wireless router and the icon light only lights when I open a browser or transmit and receive data thru an action of mine.
With my laptop, as soon as I boot it up, the icon light comes on and stays on with all this data sending and receiving.
Does anyone have any ideas?

You can try to see what connections are active when your laptop is connected. If you're using Windows, bring up command prompt, type "netsat" and see what connections are active to what target(s). Check Task Manager and see what applications or processes are active and using the cpu. Maybe try installing a third-party firewall (ZoneAlarm) that monitors inbound and outbound connections to determine if any rogue applications are running.
"Everybody save your work.......NOW!!"

Configure WRT54G Wireless Router with PUBLIC IP address and use DHCP for internal computers

Hi,I have an Internet online service with 5 public IP addresses. The router and the AP are connected to a switch. I would like to configure a WRT54G wireless router with one of this IP public Address and use DHCP (with private ip address) for the computers that will connect to the AP. As the AP is connected to the switch it is possible that other wired computers that are connected to the same switch can obtain an IP address from the DHCP ?
Thansk in advance

Thanks for your help. Please correct me if Im wrong. After connecte the equipments the way you suggestI setup a static IP address (The public IP) in the WRT54GI enable DHCP in the WRT54G with a range from 10.10.0.100 to 10.10.0.200 (as an example) The gateway is the Public IP address right ? How do I route the 10.10.0.x addresses to the public IP address. Thansk again

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

HT1444 I have a MacBook circa 2007 with System Version: Mac OS X 10.4.11 (8S2167) what software upgrade is capable? Thanks

I have a MacBook circa 2007 with System Version:
Mac OS X 10.4.11 (8S2167) what software upgrade is capable? Thanks

Choose About this Mac from the Apple menu and check the processor.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, follow the Core Duo instructions, open the Mac App Store, and try purchasing Mountain Lion. If you get told it's incompatible, phone the online Apple Store and order a download code for Lion.
(85098)

[svn:fx-4.0.0] 14150: revert the rollback of revision# 13951 to have the automation swcs built with current version of the SDK

Revision: 14150
Revision: 14150
Author:   [email protected]
Date:     2010-02-12 12:36:19 -0800 (Fri, 12 Feb 2010)
Log Message:
revert the rollback of revision# 13951 to have the automation swcs built with current version of the SDK
QE notes: no
Doc notes: no
Bugs: FLEXENT-1230
Reviewer: lauren
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXENT-1230
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/libs/automation_agent.swc
    flex/sdk/branches/4.0.0/frameworks/libs/qtp.swc
    flex/sdk/branches/4.0.0/frameworks/libs/qtp_air.swc
    flex/sdk/branches/4.0.0/frameworks/locale/da_DK/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/da_DK/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/de_DE/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/de_DE/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/en_US/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/en_US/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/es_ES/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/es_ES/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fi_FI/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fi_FI/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fr_FR/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/fr_FR/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/it_IT/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/it_IT/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ja_JP/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ja_JP/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ko_KR/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ko_KR/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nb_NO/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nb_NO/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nl_NL/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/nl_NL/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/pt_BR/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/pt_BR/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ru_RU/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/ru_RU/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/sv_SE/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/sv_SE/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_CN/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_CN/qtp_air_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_tw/automation_agent_rb.swc
    flex/sdk/branches/4.0.0/frameworks/locale/zh_tw/qtp_air_rb.swc
Removed Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/automation_air/bundles/
    flex/sdk/branches/4.0.0/frameworks/projects/automation_dmv/bundles/
    flex/sdk/branches/4.0.0/frameworks/projects/automation_flashflexkit/bundles/
    flex/sdk/branches/4.0.0/frameworks/projects/automation_spark/bundles/
Property Changed:
    flex/sdk/branches/4.0.0/

Credit Tony E
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data. See https://support.mozilla.com/kb/Uninstalling+Firefox
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is $19.99.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Telstra Bigpond 4G Wireless Modem with Sierra Wireless Battery

I have a Telstra Bigpond 4G Wireless Modem, which is run with a Sierra Wireless Lithium Ion batterry Model W-3, product no. 5200008.I got this from Telstra back in about Ausgust 2013 and have only recently noticed that my battery gets very hot, it is swollen and the edges are coming away from the from the unit. i spoke to my local telstra shop and they said I would have to contact Sierra to get a replacement. Is this what I have to do?And if so can someone lead me to Sierra Wireless website or email or number cause I've done some searching and can't find what i'm looking for.Would Telstra (bigpond) be able to help me with a replacement?CheersVicki

I have read this post and must confess I have always found telstra to be fantastic suficiently so that we changed all our accounts across to telstra after a very long and loyal term with another provider.up untill we purchased the same wireless 4g unit as mentioned in this post we would have argued with anyone downing the tesltra service infact we have recomended amny many driends to our local Browns Plains Independant store (NOT THE TELSTRA SHOP STAFF At TTHE TELSTRA SHOP IN BROWNS PLAINS ARE THE RUDEST PEOPLE I HAVE EVER MET THEY CHASE CUSTOMERS AWAY WITH THEIR RUDENESS AND UNWILLINGNESS TO ASSITS INCLUDING THEIR MANAGER WHO I HAD THE MISFORTUNE TO DIRECT A COMPLAINT TO ABOUT THEIR CUSTOMER SERVICE, Telstra are lucy their is an independant resellar in the center)anyway the store the customer service on the phone all have been the best but I have the same problem battery over heating and swallowen luck I found it before it exploded it even popped the back off the unit.I went to my local independant unfortuanatly he didnt have a spare battery he susgested I try the Local Telestra Shop Or Battery world, not wanting to go near the local telstra shop I tried Battery World unfortuneatlly no luch they also advised i try the local Telstra Shop.How stupid am I what an un helpfull bunch of rude animals if I wanted to be treated like i had the plague I could have gone else where and should have they make you feel like you are some kind of criminal for having a problem or dareing to come in to their store how the generate any bussiness is beyond me, but like I fool I tried them no battery to replace my one no replacement units I could buy and no offer of a waranty repair. How ever I could go on another plan and get a different unit to the one I have I cant buy a replacement unit out right for cash because the sim card is locked to the unit but I can start another contract and just keep paying for my old one till its paid out.so I am looking for somewhere to buy a new battery , I have halved the services myself and my company have with telstra and out usuall Telstra accounts have dropped from about $2500 to $3000 dollars a month down to $700 per month while i wait for the contracts to end so the balance can be transfered to another service provider, and the plan with the $G wirless unit attached sits as it has for monthes now being paid for every month with zero useage.I had also tried the customer service line also with little luck and it appear that telstra and bigpond are to seperate idenities so dont ring the wrong one or you will be told in no uncertain terms what an idiot you are for not knowing they are seperate.so to all I say yes I am an Idiot for thinking that Telstra would give good service they are like fair weather friends will look after while you dont have a problem and are paying them without question but dont have a problem because they will dump you like a rat leaving a sinking ship i fanyone knows where i can buy a bettery i woeld be greateful otherise if i find a supply first i will post it herethank you to all for putting up with my rant but sooner all later we say enough is enough and I am not going to take it anymore.What happenned to good old customer service, I guess the electronic age did and face to face contact is no longer required so they can (like I am Now) hide behind their key boards and ignore you or treat you poorly,Please excuse my spelling mistakes I left my glasses in the car and am typing on blurry keys and screen.

DDNS error on WRP400 with firmware version: 2.00.26

I have recently upgraded my WRP400 with the latest firmware (2.00.26) and found that the DDNS updating function with dyndns.org is stopped.
I made tests with the previous firmwares (2.00.20 and even with the old 1.01.00) and DDNS updating works with these older firmwares and stops immediately when the new 2.00.26 firmware is applied.
The reason why I need to upgrade to the latest fw, because I have the very annoying issue with the WRP400's stoppages. The release notes for the .26 firmware tells this is fixed now. btw, after the fw update it has stopped only once in 3 days...(!) but this is far better than the daily 2 or more stops...
I need the DDNS service, and I want a stop-free router at the same time. I know, our world is not that easy today, but please...

Hi Szabolcs,
I do have the same problem.
I do use more them 10 WRP400 devices, and I am still using fw 2.00.20 due to the DDNS problem.
WRP400 could be a very nice device, but it simply doesn't performs as it should. And in my opinion, the list of supported USB modems is simply to short.
I am already considering chaning from supplier and try to find a different and working solution in the market.
I also found out that the router, from time to time need to be reseted (it simply stops performing as it should). So, as there is no auto reset option, I need o use Plug In Timers to reset them once every day.
So, as you can see, I also would like to see a solution for this problem...

All RVS-4000's with firmware versions less than 1.3.2.0

Hi,
For those of you without the time to explore the Cisco site. I thought you guys might want to know about the following vulnerability. Which is fixed in the latest firmware version 1.3.2.0 for the RVS-4000:
Cisco Security Advisory: Cisco Small Business Video Surveillance Cameras and Cisco 4-Port Gigabit Security Routers Authentication Bypass Vulnerability
Document ID: 111641
Advisory ID: cisco-sa-20100421-vsc
http://www.cisco.com/warp/public/707/cisco-sa-20100421-vsc.shtml
Revision 1.1
Last Updated 2010 MAY 19 2030 UTC (GMT)
For Public Release 2010 APR 21 1600 UTC (GMT)
Software Versions and Fixes
To determine the software version running on a camera, administrators can click the "About" tab at the top-right of the device user interface. The software version information can be obtained on the System Status page under the "Status" tab.
The latest camera software can be downloaded at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414029 ( registered customers only) .
The software version of the RVS4000 is displayed on the main router page displayed after users log in.
The latest RVS4000 software can be downloaded at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=282413304 ( registered customers only) .
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Small Business Support Center or your contracted maintenance provider for assistance.
Product
First Fixed Version
PVC2300
1.1.2.6
WVC200
1.2.2.0
WVC210
1.1.0.15
WVC2300
1.1.2.6
RVS4000
1.3.2.0
Bruce

Yes, I posted this same information in the Video Surveillance section a few weeks ago. it was actually a Partner on the
community who found this and brought it to our attention and we fixed it.
Thanks for cross posting here, since you are right in it also effected this router.
And a big thank you for taking the time to collaborate some very useful information with the community. I have noticed your recent posts and I think they are well writen, helpful, and well organized. I also like your idea of turning some threads into solutions documents and resource labs perhaps.
If you would ever like to post something of that natire, you may also. Just creat a document with your findings.
Steve

Battery Update 1.4 does not update my battery with firmware version: 102a

Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
A quick Google search showed that plenty of other people are asking on the web about this version 102a firmware as well.
So, any idea what the deal is with batteries that have the firmware version 102a? I got this current battery under the recall program as the original one that came with my MacBook was one of the bad ones.
This whole MacBook battery business has been a nightmare. It's wasted hours of my time, and is a real black eye on what is otherwise a good computer experience.
Thanks in advance for any input.

Macophile wrote:
Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
I started thinking about it, and 102a is actually a larger number than 0110.
In any case, the updater was only meant for specific battery revisions.

I have a Mac Book Pro with iPhoto version 9.5.1 Can I delete more that one photo at a time? Thanks!!

I have Mac Book Pro with iPhoto version 9.5.1. Is there a way to delete more than one photo at a time? Thanks!!!

Hi LarryJackie,
When you go into Photos (or an Album or Event), click on the first photo you want to delete. If you want to delete a whole selection of photos in a row, hold down the Shift key, and then click on the last photo in the section you want to delete. All of the photos will be selected. Then click on Photos in the top menu and click on Move to Trash.
If you want to select photos that are not in a row, then click on the first photo, then hold down the Command key, then click on other photos you want to select. Keep the Command key held down until you have selected all of the photos you want. Then click on Photos in the top menu and then Move to Trash.
Cheers,
GB

I have a WRT54G Wireless modem with firmware version 1.02...

Similar Messages

Maybe you are looking for