I have a zen nano plus 1 gb creative mp3 playe

Where on the player is the serial number locatedI need to know if the serial number the product and on the user guide are the same?This is important.. Please send me a reply as soon as possible?

turtledoves,
It's located at the back of the player
Jason

Similar Messages

  • I have a Creative ZEN Nano Plus

    Can someone tell me how or direct me to the advantage on the Line In connection. How do I plug in to and transfer music from another CD or device to put music on my Player ?TC

    I'm a bit unclear on how you do direct Line In recording, as I don't have a Zen Nano Plus- my brother does. We tried it a few times, but found that it was much faster to rip the CDs on the computer and transfer from it, rather than wait for the Zen Nano Plus to copy the CD in real time.
    However, the Zen Nano Plus manual gives these instructions:
    Synchronizing MP3 encoding
    If you are encoding songs from a CD or MiniDisc, enable Sync Track (SYNC) so that your player will encode the songs from your source as separate tracks. Your player will automatically stop when the last song is played. Sync Track is enabled by default.
    In the MP3 Encoding screen, press the Scroller.
    Scroll Select the Sync Track option and turn Sync Track on or off. When Sync Track is turned on, appears at the top right corner of the MP3 Encoding screen.

  • Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

    HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
    8 May 2006, Creative Zen Nano Plus Pack
    8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
    8 May 2006, Zen Nano Plus Media Explorer 2.00.0
    8 May 2006, Creative Audio CD Ripper .60.0
    7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
    7 May 2006, Creative MediaSource Player/Organizer 3.30.2
    7 May 2006, Common Audio Driver Interface .03.29
    3 May 2006, MediaSource AudioSync Plugin .0.03
    3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
    3 May 2006, Creative Music Store Plugin .00.09
    3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
    3 May 2006, Creative MediaSource Player Skin Pack .0.06
    3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
    3 May 2006, MediaSource CD-ROM Burner Component 3.0.
    3 May 2006, MediaSource Detector 3.00.7
    3 May 2006, Common Audio Driver Interface .03.
    3 May 2006, Creative MediaSource 3.20.57
    3 May 2006, Audio Device Selection .0.05
    3 May 2006, Creative System Information .0.3
    3 May 2006, Zen Nano Plus Media Explorer .0.03
    3 May 2006, Creative Audio CD Ripper .60.06
    Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

    Welcome to the Apple community.
    If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

  • Problem with zen-nano-plus!! please help

    i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
    i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
    when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

    Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
    Good luck!

  • Zen Nano Plus Lin In Iss

    I have a Zen Nano Plus. I purchased it for recording church messages. I run the cord from the line in to the church sound board. The recording is good, however, the nano sometimes shuts down during the middle of the sermon. What would cause this problem
    ? Is there a special setting or fix?Please help

    Hi,
    Sorry to hear you are having problems. There is no setting for this as this isn't normal behaviour. I'd suggest loading the latest firmware onto the unit and also checking the box "Format Data Area" when given the option to during the firmwares install.
    The firmware is available from here .
    http://uk.europe.creative.com/suppor...ame=Windows+XP
    Hope this hel
    ps.
    John

  • Can't power on Zen Nano Plus

    I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

    I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
    Message Edited by joenanoplus on 2-26-200608:32 AM

  • Zen Nano Plus Volume Trou

    I have a Zen Nano Plus, and for some strange reson the 'volume up' button won't work, yet the 'volume down' button will. I pressed the 'volume down' button too many times, however, and now the volume is on 0. I can press 'volume up' all I want, yet nothing happens. I would appreciate some help, because I really want to listen to my tunes.

    It could be a hardware fault as BaconBits suggests but it might be a firmware glitch. Try reloading the firmware. Even if it is hardware then the firmware reload will set the player back to a default volume setting - at least then you can use it.
    You can get the latest version from the Creative Downloads pages or version .03.02 from DAPJukebox. Try to load the same version as you already have to save any other problems. Backup your music to your PC first.
    PB

  • Zen Nano Plus static on voice recordings while driv

    I have a Zen Nano Plus GB and I'm pleased with the quality of the voice recorder in general.
    However, all voice recordings I've made inside an automobile traveling over 55 MPH contain a lot of very loud static interference noises. I was hoping to create most of my voice memos while driving, but the recordings I've made while driving (in two different cars) are unusable because of this frequent static sound. I've tried holding the device in different positions (near the window, away from the steering column, above my head, etc.) and it does not seem to help. This does not happen in any other situation.
    Has anyone else experienced this?

    Then what is the point of recording FM if you can't even save it's I'm just going to have to convert it the old fashioned way, but before I do, I want to note that the SOLE reason I got the Zen Nano Plus is because I wanted to record an event off FM. No, there is no prohibited copyright stuff on this, it's all meant to be recorded. I really wish this would be worth the money, but it seems that I am going to have to get another MPIO. Easier to use and fewer nuisances.
    The shame...

  • Zen Nano Plus, blee

    I have a Zen Nano Plus and every so often it makes this bleep/beep sound. At first I thought it was just the battery getting low but it doesn't seem to be. Is it supposed to do that?
    Thanks.

    Any pattern to when it happens? Does it happen when you play the files on your pc? Does it happen only when playing protected files? There might be some quirks with some protected files. I seem to vaguely remember reading something about that. If the files play perfectly on the pc, then installing the new firmware might solve the problem. Make sure you have copies of the files on the pc before installing the new firmware, as installing it will delete the files stored on the player.

  • Car Adapter Capabilities for Zen Nano Plus

    <FONT face="Comic Sans MS" color=#cc66ff size=3>hello, i am fairly new to this whole thing...i have the Zen Nano Plus and want to be able to play my music in my car....is this possible? and what do i need to buy to do so? i just dont feel like searching for the answer myself, figured this would be quicker!!!
    <FONT face="Comic Sans MS" color=#cc66ff size=3>
    <FONT face="Comic Sans MS" color=#cc66ff size=3>thanks!!!!

    berries674 wrote:
    <FONT face="Comic Sans MS" color=#cc66ff size=3>i just dont feel like searching for the answer myself, figured this would be quicker!!!
    And you expect an answer!
    PB

  • Zen Nano Plus Connection Probl

    (2)Zen Nano Pluses. Both using firmware .0.03. One Red, one Black (Click and Clack always want to know what color car they are diagnosing...)
    (2) Computers, both XP SP2 with all updates; one called Dad's, one called W's.
    One Zen (for ID, the red one) has been used on Dad's computer without issues for about 3 weeks.
    One Zen, new and color Black, works on Dad's computer, but not on W's computer. W's computer will not properly recognize either the new Nano (the black one) or mine (the Red one), in either Creative MEdia SOurce, or Zen Explorer, or Windows explorer.
    First, I have read the FAQ's. I have uninstalled and reinstalled the Nano software. When I use PB's check odd things appear:
    PB's check:
    With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
    Advanced Config and Power Interface (ACPI) PC
    ->Microsoft ACPI-Compliant System
    -->PCI Bus
    You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
    Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
    For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
    Your entry should be similar but with Zen Nano Plus instead of N200.
    While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
    PB
    What appears on Dad's computer, with either Nano, is USB Enhanced Host Controler, USB Root Hub, Generic USB Hub, USB Mass Storage Device, Creative Zen Nano Plus USB Device, Generic Volume. Again, either Nano works on Dad's computer.
    On W's computer, after just having reinstalled the new mass driver, it is USB2 Enhanced Host Controller, USB Root Hub, USB Mass Storage Device, Disk Dri've. On restart from that, it reads Creative Nano Plus USB Device, with no "volume" underneath it, and the oddball icon is not there. I think the oddball icon is associated with the "Disk Dri've". Once it read under Creative ZEn Nano Plus, "Unknown Device". Also, when I attach a Nano to W's computer, it first seems to see the Nano in the New Device Found message, THEN while it is still attached, it says in another New DEvice Found mesage that it has found a Disk Dri've. It also shows some oddball icon I can't decipher, right next to the "safely remove Hardware" icon. The oddball icon does not appear on Dad's computer.
    Any ideas?
    Thanks.Message Edited by Bennyd on 0-0-2006 06:6 AM

    NEWS!!!
    Actually, we have 3 Zen Nano Pluses. Two (the black and the red) have .0.03 firmware. I have never connected the black or the red to W's computer and have it connect properly. In fact, I had just tried (again) to connect the black, it failed, I re-booted. Then, I connected the blue, with the old firmware, and it CONNECTED. I could see it in WIndows explorer as dri've F:, which never happened with either the red or the black with .0.03 firmware.
    So, now what?

  • Zen Nano Plus par

    I have a Zen Nano Plus, and apparently my battery lid cover broke. I dropped it by accident and the lid just cracked. It won't attach to the mp3 player anymore. The stupid thing was, I only dropped it at a height of 5cm and it broke. The mp3 is still fine and all, it's just that the cover won't attach, and it looks ugly without it. Plus, I now have to use some sort of material to stick it to the battery. It's disgusting. Does Creative sell spare parts for this? I want a new battery cover for my mp3 player but I don't know what to do. I need desperate help!Message Edited by mrsway on 05-04-200709:43 PM

    Hi,I was afraid of that.
    That stinks.
    This player is severely handicapped for what I need it for then. I wish I realized that before I bought it.

  • Zen Nano Plus--Nothing happens when I try to rip from my cd player to the Zen Nano pl

    Please HELP!! I just bought my Zen Nano Plus last week(st mp3 player I ever owned). I've tried to rip cds from my stereo to the Nano but nothing happens. The encoding bar appears but shows no progress. Could I be plugging the cord in the wrong place? I plugged it in where you would normally plug in headphones into the stereo. Any suggestions?

    I did get the line in connector, however, the only place it fits into the stereo is where you would normally plug in the headphones and that's where I plugged it in. As I mentioned earlier, the status bar does not show any progress when I press the play button.

  • Zen nano Plus, say i have alot more space but i cant upload more so

    I just got the Zen nano Plus and it says on the organizer I have 698.3 MB of space left and I cant upload any more songs at all, anyone have an idea of whats wrong?
    thanks

    See the section "I can't seem to fit any more files on my flash player yet I have free space, why?" in the FAQ post.

  • Zen Nano Plus WON'T START / RECOVERY / RES

    Hello ZNP friends and fellow victims of frustration,
    I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
    I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
    What I do remember is this:
    ) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
    2) I did double click it to call it up.
    3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
    4) I did leave the battery out of the nano plus during this operation.
    5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
    6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
    What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
    Creative should really have a clear set of instructions by now for fixing this problem.
    Good luck!
    Buck

    Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

Maybe you are looking for