I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

Similar Messages

  • I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    I am seeing if I can get another battery even though I do not believe that is the issue.  It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery?  It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage).  When just sitting idle it doesn't seem to turn off until that 55-60% mark.  It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
    Any other suggestions would be helpful... and I will get back to you if a new battery helps.  Thanks!

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • I have some problem .i update my iphone3gs software .software downloaded now its not working .warning select network connect to itunes ..please help me

    I have some problem .i update my iphone3gs software .software downloaded now its not working .warning select network connect to itunes ..please help me

    please help me ?

  • I have a wifi connection but "safari cannot open the page because it is not connected to the internet" I have reset everything; I have used Itunes to update and reset. Still no good. It worked until 2 days ago

    I have a wifi connection but "safari cannot open the page because it is not connected to the internet" I have reset everything; I have used Itunes to update and reset. Still no good. It worked until 2 days ago

    Reset everything.. did you do this?
    Tap Settings / General / Reset / Reset Network Settings
    If you're already been there, done that, could be a third party app preventing Safari from accessing the web.
    Re sync your apps 5 at a time, then test the iPad.

  • Many Apps are no longer working after webOS 1.4 update! - please help!

    Hi,
    Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
    Here are the ones that just return a blank/white screen after launching so far:
    SplashID
    Daily Devo
    Daily Light (Love)
    Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
    These are just a few of the Apps that I am having problems with and there are probably many others.  I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
    Anyone else experiencing this issue as well with any Apps?
    Thanks in advance for any help that you can provide.

    SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password.  I see no update for it in the App Catalog.
    EDIT: Never mind.  It appears that it only did that on the first launch.  I closed it and restarted it, and now the screen in SplashID is correct.

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • Canon iP2700 is no longer working after update

    My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2  from  https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
    tail -n 100 -f /var/log/cups/error_log
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
    D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
    D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
    D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
    D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
    D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
    The CUPS ownership of the USB device file seems OK:
    ls -l /dev/bus/usb/001/006
    crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
    I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
    EDIT
    I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
    Last edited by otx (2012-03-09 14:21:27)

    See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

  • Internet sharing no longer works after Lion 10.7.4 update

    Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

    so here is da answer
    1. go to finder>(computer name)>macintosh HD>library>preferences
    2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
    3. restart mac and device which you share intenet to
    then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
    then, just wait for apple to release da 10.7.4 fixed
    please use da steps!

  • Epson printer driver no longer working after 10.4.11 update

    It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
    I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
    Does anyone know a workaround?
    Thanks very much
    Wolfgang

    I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
    I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
    I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

  • Apogee Jam No longer working after 1.1 update?

    My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
    Specifically what happens is:
    1. I open the garageband app
    2. I select the guitar amp
    3. I plug the Jam chord into Ipad (guitar is already connected to cord)
    4. Jam light goes green, blue, bright green then green
    When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
    I've tried plugging my guitar in first, then starting garageband, no difference in results.
    I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
    Outside the garageband app, the ipad does recognize the Jam in settings, general.
    What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
    Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

    Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
    Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
    Message was edited by: Rickd3333
    Message was edited by: Rickd3333

  • Headphones no longer work after ios8 update to Iphone 5

    My plug in head phones no longer work after updating to IOS8.  I thought it was the head phones and bought new ones - they don't work either.  I updated my iPad and both head phones work.  Phone is IPhone 5 - not due for an upgrade until December.  Any suggestions?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • Mini DisplayPort no longer working after update

    Mid-2010 MacBook Pro here.
    Ever since I updated to Yosemite, my Mini DisplayPort is no longer working.  With Mavericks it was working just fine.  I have restarted and done everything I know how to do (PRAM, SMC, etc) - does anyone have any ideas?  The internal LCD will blink upon plugging my cable into my port, but that's it.  I'd really like to have my monitor with my laptop in clamshell mode again.
    Thank you!

    ardenus wrote:
    I recently updated flash player, only to find it will no longer work.
    Have tried uninstalling restarting,repairing disk permissions and re-installing to no avail
    any ideas?
    24" imac aluminium 2.8GHz, Mac OS X (10.6.1), 4GB memory, 300GB HD
    Not sure what OS you are running, posting in the LIon forum I assume Lion?
    Try updating Java and Flash:
    http://support.apple.com/kb/DL1421
    http://get.adobe.com/flashplayer/

  • Location services no longer working after 4.3.3 update.

    I have a 3rd Gen 32GB touch, and after updating the software today, my location services no longer work. My device fails to find my location for the maps app, as well as other 3rd party apps. There was no problem with finding my location prior to this update, and other devices on my network aren't having an issue pinpointing a location either.
    I have tried restoring my iPod as well as turning the location services on and off.
    Any help would be greatly appreciated (:

    I have the same iTouch and have experienced the same problemafter updating the software.
    If you go to Settings>Location Services and it says “ON yet it’s gray and faded, please read on.
    Go to Settings>General>Restrictions (Enter Passcode)>Allow Changes:Location
    The page should have something that would say “Allow Changes”, “Don’t AllowChanges”….and some of the 3rd party apps that need location servicesas you mentioned listed below. Tap “Allow Changes” and slide “Location Services”ON. Then manually slide the 3rd party apps that you want to enableLocation Services to ON.
    Then, you’re good. Hope it works out. Frustrating, I know.

  • Many of my System Preferences will no longer work after installing Mountain Lion. Software update, startup disk, iCloud, etc. no longer will launch. I keep getting a drop down window saying I must restart system preferences in order to use. No go!

    Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
    Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.

    Hi Jeff,
    Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
    Hope it goes well,
    Rick

Maybe you are looking for