I have activated the standard datasource in r/3? how to identify active?

Hi All,
i have activated the standard datasource in r/3 ? and i have replicated the same in the bw system and in the source system of r/3 i have replicated it and i can find the data source there ? but how to identify whether the datasource is active in the bw system or not ?
i cant see a tick mark on the data source does it determine it is active?
Pls guide me on this?
thanks
Pooja

Hi all,
I am working on 3.5
And where can i find the datasource is green or not? it is not assigned to the source system i can identify it?
i am not able to rightclik on the datasource and see the active version.
When i right click on the data source i can see this option:
1. assign infosource
2. maintain datasource in the source system etc?
Thanks
Pooja

Similar Messages

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Adding fields to the standard datasource

Hi All,
The custmer wants to add some fields to the Material master. I have found that those fields are already there in the standard extractor but are not being mapped to any infoobject.Do I need to create new info objects to map them or will there be a standard info object for all the fields in the standard datasource?
Thanks a lot,
RPK.

Hi CP,
Thanks for your reply. The fields are available in datasource but are not mapped to any infoobjects in the Trans Structure. If I have to populate them in BW then I need to map them to some info objects. I am clear upto this. Now my doubt is...since the standard datasource already contains these extra fields which I need to add, will there be standard info objects already created for these fields or do I need to create some Z info objects to map them with? How can I check if there are some standard infoobjects for these fields.
Thanks,
RPK.

Unable to extend the standard datasource 2LIS_13_VDKON

Hi
we are unable to extend the standard datasource 2LIS_13_VDKON on the
SAP by the following fields: MCKOMV-KNUMA_BO, MCKOMV-KNUMH and MCKOMV-KNUMV. We allways get the error message "End phase 002 - D0322".
best regard

Hi farchid,
i checked that one, but you can ignore that one.
please check the data source status is green that's it. after including that fields in the data source the status change to red. then go to data source maintenance screenselect the field selection check boxand then save it.
now the status changes to yellow.
now select inactive link against your data source in job control--status will turn as green.
now you can do the set up table fill up for that data source.
before doing the transport please make sure the following conditions. this will be displayed when your enhancing the data source.
Extract structure MC13VD0KON generated successfully, see long text
     Notifications MCEX 027
Diagnosis
     The extract structure was generated successfully.
Procedure
     Now choose the maintenance screen of the DataSource. After that, the
     status display (traffic light) jumps from red to yellow.
     Please make note of the following before you transport the changed
     structure MC13VD0KON into another system:
     o   Run the transport when the target system is not being booked.
         Otherwise you will need to initialize it because documents are lost
         during this time.
      o   None of the clients in the target system in the V3 update for the
     application 13 should contain data. If you are unsure, start the V3
     update of the application 13 in all clients.
o   If there is still data in the central delta management of the target
     system, it must be retrieved by BW before the transport takes place.
o   If you have already reconstructed within this target system, it may
     be that the data still exists in the reconstruction tables. After
     the transport, you can no longer transfer these entries into BW. You
     must delete the contents of the reconstruction tables of the
     application 13 in the target system and run another reconstruction
     if need be.
o   If there is an update log in the target system, you cannot read the
     log data of the application 13 after the transport has been run. You
     can only read it again once data is booked and the last log entry
     overwritten.
Use the report RMCSBWCC to display a log for the changed extract
structure in the target system, to see if any of the above problems
exist. An additional switch deletes all update logs for the application
of the selected extractor.
Please also note that you must reactivate the transfer structures when
you change the extract structure after replicating a DataSource.
hope this help you
regards
harikrishna N

Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

I just bought a new macbook, and am trying to transfer my settings, etc, from my old imac. I have connected the two with a firewire. How do I now transfer the data?

I just bought a new macbook, and am trying to transfer data from my old imac. I have connected the two with a firewire, and how do I now transfer the data?
Thanks in advance.
Joel

You can connect them in Target Mode http://support.apple.com/kb/HT1661 and then drag and drop from the iMac to the MacBook.

I have lost the export settings for FCP7. How can I get these back?

I accidentally threw a folder in the trash. I got a lot of stuff back using Data Rescue, but not everything.
I have lost the export settings for FCP7. How and Can I get these back? tia

Sorry for the delay in response. It sounds like you have somehow deleted your quicktime ProKit with the codecs by what ever process you were trying to restore you trashed files.
Go to the Apple Menu > System Updates and see if the updater sees a need to install them.
If this doesn't work - it might be
the best thing to do would be to get FCS Remover from Digital Rebellion (free)
http://www.digitalrebellion.com/fcsremover/
and try to remove all traces of your corrupt installation and then do a clean install from your original disks, followed by updates to restore the new ProKit codecs.
If your system has been corrupted by whatever you did, it might be best to wipe the drive and start from scratch - but understood this is not a pleasant choice.
Other posters may have different or better suggestions. The FCS Pro Apps require a lot of files and file structure that may or may not be apparent, and were never drag and drop installable. They always needed to be installed with the proper installer.
MtD

I have create many free acounts for apple I have reached the limit of creating free acounts how can I delete that free acounts which I have made?

I have create many free acounts for apple I have reached the limit of creating free acounts how can I delete that free acounts which I have made?

iOS devices can only create 3 free iCloud accounts, Get a new iOS device
why would you need more than 3 iCloud accounts for 1 device o.O

I have lost the Camera Icon off my Iphone4, how do I get it back?

I have lost the Camera Icon off my Iphone4, how do I get it back?

Check to see if you have restrictions on.
Check if it is on other home pages.
Check to see if it is in a folder.

I have lost the google toolbar in safari. How do get it back? Reset Safari does not help.

I have lost the google toolbar in Safari. How do I get it back. Reset Safari does nor help.

From Safari's menu bar top of your screen click View / Customize Toolbar.
Just drag up the default bar or as individual objects.

I swapped my iphone from apple store india and my imei of iphone changed and i have lost the box and bill of phone , how can i get my old imei number.

I swapped my iphone from apple store india and my imei of iphone changed and i have lost the box and bill of phone , how can i get my old imei number.

Of course it changed. A phone's IMEI number is unique to each phone. The IMEI number for a phone does not transfer to another phone.
Since your iPhone was exchanged under warranty without having the box and bill for the original purchase, you don't need it now either. The exchange under warranty remains under the warranty for the original purchase.

My mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

my mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

Here:
http://support.apple.com/kb/HT1861

HT201303 i have forget the answers of my security questions , how to reset them, thank you

i have forget the answers of my security questions , how to reset them, thank you

i have forget the answers of my security questions , how to reset them, thank you
iPhone

I have forgotten the answers to my security questions, how do I find them?

I have forgotten the answers to my security questions, how do I find them?

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?

My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have activated the standard datasource in r/3? how to identify active?

Similar Messages

Maybe you are looking for