I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

carolweiler wrote:
I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
See:
Camera Raw plug-in | Supported cameras
You need the 8.2 version of the ACR module, and PS10 is too old to be updated.
So, you can choose between 3 solutions:
- update PSE to PSE12
- use the Canon software to convert the raw files to the tiff format which PSE10 can handle
- download and install the free Adobe DNGconverter which is able to convert a whole folder of CR2 raw files to the Adobe DNG raw format which PSE10 can handle.
The last two solutions are free.

Similar Messages

  • I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files?

    I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files? Cheers!

    What version of Photoshop are you running?  You will need at CS5, CS6, CC or CC2014.  Each version needs a different ACR-plug-in to open files from that camera.
    If you are on CS4 or earlier, you'll need to upgrade—or, in the alternative; look for, download, instal, launch and run the free, stand-alone DNG Converter 8.6 on each file of raw NEF files to convert them to raw DNGs first so you can open them in your version of Photoshop and ACR plug-in higher than 2.4.

  • If I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

    if I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

    Ok. That explains 8.3. I know some want to stay with 10.6 because they have software or hardware that won't work on anything later.
    Gene

  • HT1688 I recently upgrade my Iphone but the old one is still active. I installed the friendjectory app on my new phone but it will not open but for a few seconds ab=nd then closes. What is wrong and what do I need to do to make this app work on my new pho

    I recently upgraded my Iphone. Iinstalled the friendjectory app on the new phone but it will not open but for  few seconds and then closed. What is wrong and what do I need to do? My old phone is still active and working. Do I need to do something about that?

    Hi stanczak53,
    Welcome to Apple Support Communities.
    See this link for some tips on troubleshooting apps on your iPhone:
    Using apps on your iPhone
    http://www.apple.com/support/iphone/assistant/application/
    Best,
    Jeremy

  • Aperture imports the raw images from my new Olmpus e-p5 as .orf files and does not recognize them. What can I do?

    Is there another way to convert the .orf files that are not being recognized ?
    I used a card reader.
    The Olympus Viewer software reads the raw images just fine.
    Thanks

    I do not see your camera on the list of supported cameras, sorry.
         Apple - Aperture - Technical Specifications - RAW Support
    The Olympus Viewer software reads the raw images just fine.
    Does this program have an otion to export the photos in a different format? Then it would be the best way to convert the image files to a supported format.
    Or check, if Adobe's free DNG converter supports your camera:  Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
    Aperture can import DNG files with the right settings.
    You might also simply import raw+jpeg and work with the jpegs as original files, while you are waiting for the raw support to be released.
    Regards
    Léonie

  • I have just  installed prem elements 9 onto a new PC and it will not open any of the old projects

    When I try to open any of the previous projects or any video file it comes up with the error message that the file format is not  supported or the codex missing,. the same file will open OK on the old PC. This probems occurs for all video formats.

    Without more information I can't say for sure, but:
    1) You'll need to ensure you have the latest version of Quicktime installed in order to work with the MTS files from your Canon. Then start a new project and set it up for Full AVCHD video. When you do this the program will automatically install the necessary codecs.
    2) As for the AVI, it could be an MJPEG AVI, which is an iffy file to edit in Premiere Elements. Sometimes it works and sometimes it doesn't. Installing the software that came with the camera can help.

  • HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7.  Message shows that iTunes has stopped working.  This happens every time.  I have updated iTunes Software.  Will not solve the problem.  What is wrong

    I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded.  When I click on the iTunes Store Box, Nothing happens except for a message that reads:
              iTunes has stopped working.
    The following items give me a choice, but no answer comes up.  The computer will shut down the website.
              "Check online for a solution and close the program"
              "Close the program."
    There is an item below the box that is selectable for View problem details.  When clicked a long list of items show up.  I have listed some of the problems as written, but I do not understand them.  I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version.  How can we go back and download an earlier version of iTunes?
         Here are some of the Problem Details:
         "Problem signature:  APPCRASH
         Application Name:     iTunes.exe
         Application Version:  11.0.1.12
         Application Timestamp:  50c8fc7e"

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

  • I'm new to Mac and Adobe, I installed PSE 11 from disk on iMac but it will not open, any help would

    I'm new to Mac and Adobe (probably sounds lame :( , but anyway I installed PSE 11 from a disk and it won't open on iMac ? Any help would be appreciated.

    Can you start the Editor or Organizer from Launch Pad?
    Can you see the application correctly installed from Finder:
    Applications >> Adobe Photoshop Elements 12 >> Support Files >> Photoshop Elements 12 Editor

  • I have Lightroom 3.6 and it does not recognize the raw images from my Canon 7d mark II, suggestions?

    I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?

    Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
    Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom.

  • Problem with the RAW images from Canon 5d Mark III

    hope you are doing good. i need your opinion regarding a phenomena i am observing in the RAW images from Mark iii.
    The following images appear to be absolutely correct in the camera and when viewed through a picture viewer.
    I have tried and tested the following scenarios:
    1. Used a medium speed kingston CF Card (new) and transferred the images through the USB cable supplied with the camera.
    2. Thought the card might be slow OR faulty.. used Sandisk Extreme and Extreme Pro SD Cards but same result.
    3. Transferred SD Card data through the builit in laptop card reader.
    4. Have directly imported the images from SD Card into Lightroom 4.3, copied the data firstly to laptop HDD and then imported, copied the SD card data to an external HDD and then copied. .... same result!!
    5. Have tried the same with both Win7 and Mac OS.
    6. The DPP sw that came with the camera gives the error of 'Decoding Failed' with these images.
    Usually 10-15 images out of 100 give this kinda pattern. so i was hoping if you can guide me what is going wrong here !!!

    The camera and PictureViewer are likely showing you the embedded JPG, while DPP and LR are decoding the raw data which appears to be corrupted.  Assuming you have formatted your SD cards in the camera and the issues are always in the same positions in the same images when you transfer them multiple times from the card to different computers via different methods, then the data is on the card that way.
    If the embedded JPG is ok then the sensor is ok, so something between the sensor-readout and the storage on the card appears to be failing intermittently, and it’s time to talk to Canon, I think.

  • Why won't RAW images from my new Powershot SX50 import in LR3?

    Why won't RAW images from my new Powershot SX50 import in LR3?

    hello,
    minimum lightroom version required:4.3
    camera raw minimum required:7.3
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • I downloaded the Adobe free trial to convert a PDF to Word and it will not open.  Further, even though I have signed in, it reverts back to the sign in page over and over and over again.  How do I to convert?

    I downloaded the Adobe free trial to convert a PDF to Word and it will not open.  Further, even though I have signed in, it reverts back to the sign in page over and over and over again.  How do I convert?

    Moving this discussion to the Adobe CreatePDF forum.

  • Aperture refuse to open the RAW files from my new Nikon D7100.

    Aperture refuse to open the RAW files from my new Nikon D7100. What can I do? Thanks for help!

    the raw support of new cameras will be made with a Digital Camera RAW Compatibility Update not with a aperture update. But when the new RAW- Update will arrive is not sure.
    And that usually can only be installed with newer Aperture versions. You cannot use the latest raw support with Aperture 3.2.4, unless you are able to update to Aperture 3.4. And earlier raw support versions cannot be used with Aperture 2.
    See the footnotes on the Raw Support page  http://www.apple.com/aperture/specs/raw.html. That is why asked for the Aperture version.
    ** Requires Aperture 3 or later.
    *** Requires Aperture 3.4 or later.

  • Running CS5 on a Macbook Pro. Will not read raw files for a new Canon T5i camera.Can update the current RAW?

    Running CS5 on a Madbook Pro. Will not open RAW image files from a new Canon TRi camera. Can I update to latest RAW processor with current CS5, or must I update to CS6 on the MacBook?
    Jack

    ACR 7.4 is the one that will read T5i raw files and it is CS6 specific. You can upgrade for $200 Standard or $400 Extended in you need 3D support.
    You can also see if converting your T5i files to .dng format will do just as well.
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 7.4

  • I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

    I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

    I hope that link points to mozilla.com or mozilla.org
    You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
    The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

Maybe you are looking for

  • Files not showing up in application folder.

    No files are showing up in my application folder. I dragged a new file to my applications folder today and it shows up however it is the only one.  All the applications are still working fine just cant see them.  Any help would be awesome.

  • Delete records in status holding on Adapter Engine

    Hi all We are running on XI 3.0 and Netweaver 04 with SP20 installed I had a problem with a lot of message in status holding on Adapter Engine (develoment system) I'm not able to restart (resend) or delete this message. I had look around on SDN and i

  • String.replaceAll strange behavior...

    I have found strange behavior of String.replaceAll method: "aaaabaaaa".replaceAll("b","a"); // working fine "aaaabaaaa".replaceAll("b","a${"); // throws an exceptionThat could be probably a bug? p.s. using jdk_1.6.0_12-b04

  • IPhone 3GS stopped working after update

    When I updated my iPhone to the latest version today everything went OK when downloading, but suddenly it told me that the disc (C:\ om my PC) was full. When I cleared some space it continued, but didn't find the software afterwards. In fact my iPhon

  • Web Dynpro Calendar / Scheduler

    Hi, Is there a standard web dynpro component that i can use that has calendar or scheduler functions. I am planning to write an application that is a scheduler planning tool and would be grateful of any builtin functionality that may help! Many thank