I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card? How would I know. Airport utility in my mac says no other devices connected.

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?
If both your MacBook Pro and iPod are unable to "see" the Wi-Fi network provided by the AirPort Express, it is most likely NOT that you are missing an "airport card," but the Express may be the issue instead.
One quick test is to see if either device can "see" other Wi-Fi networks. If they can, then you can definately rule both of them out as the issue.
By default, the AirPort Express will broadcast an unsecured Wi-Fi network with a network name of something like: Apple Network NNNNNN. Can either device see this network? If not, then I would recommend that you perform a "factory default" reset on the Express, and then, check again.

Similar Messages

My new Airport express mysteriously dropped all signals, I reset it and only my iMac is now connected to my network. My iPad, iPhone 4S and Roku box will not connect - any solutions to this?

My new Airport express mysteriously dropped all signals (due to lack of DNS settings ?!?!), I reset it and only my iMac is able to be connected to my network. My iPad 2, iPhone 4S and Roku box will no longer connect. Any solutions to this? Everything was using my netwoek before.

Did you power down your modem prior to resetting the Express?
If not, do it now. Leave it connected to your Express while you power it down. Let it rest a moment or two, then power it back up. Once it restarts, determine if all your other devices are able to connect.

Not recognising user login password MacBook Pro

Hey people hope you can help! After installing new hard drive and transferring time machine data, my MacBook Pro is Refusing to recognise my password even after I have reset it using the startup disk. I enter user password on my admin user account and it goes blue briefly as if beginning load but the. Returns back to selecting user and entering password. It really strange as it does not say password incorrect its almost like it trying to load but can't. Any suggestions please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

2nd screen not recognised after reconnecting to Macbook Pro

I've got a Macbook Pro at work. It's connected to a 2nd monitor via HDMI cable, but I have to unplug the laptop and take it to meetings sometimes.
Since upgraded to Maversicks, the laptop doesn't recognise the 2nd screen when the laptop is reconnected. I've tried unpluging the cable, putting the laptop to sleep, but no luck yet. The only way seems to work is to restart the laptop with the cable connected to get the 2nd screen. This is quote annoying after a few of times in aday.
Does anyone come across this and find a solution?

Thanks

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT4259 I have the old airport express but my iPad 3 is not able to connect to it even with the app downloaded. What can I do?

I have the old airport express but my iPad 3 is not able to connect to it even with the app downloaded. What can I do?

Use a windows computer.. or ask a friend to bring a windows laptop and use the 5.6 version windows utility.

HT1595 I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

No, you cannot seperate the audio and video stream.
You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
jules

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results.

I want to listen to my music through my airport express but I also have a wireless internet connection!

I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?

David1854 wrote:
I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?
Do you mean to say you already have a wireless network setup and thought by buying the Airport Express you just could use it for wireless music alone?
The Airport Express is chiefly a wireless router first, with the wireless music and printing as extra's.
It can be used for streaming music alone, but I think it needs to talk to network time servers and thus it gets screwed up over time not being on the internet. Also by your using your computers wifi for music streaming, no internet with your other router.
So it's a all Airport Express or back to a stereo mini cable.

HT4437 i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

There are at least 3 versions:
http://www.bowers-wilkins.co.uk/Support/Support/iPod_and_Computer_Speakers/Overv iew.html
Original Zeppelin - I've had this for several years.
http://bowersandwilkins.custhelp.com/app/home/p/6,26
Zeppelin Mini.
http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Mini/Overview.html
Zeppelin with Airplay.
http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Air/
(I wouldn't regard the MM-1 as a Zeppelin but not sure if B&W call it that).
I can't do much more to convince you!
You could always update that wiki
AC

I have an older airport express but don't know where to look to find its model number. The version number is airport utility 6.3.4 (634.17). Can anyone point me in the right direction? Thanks.

I have an older airport express, but don't know where to look to find its model number.
The version number is airport utility 6.3.4 (634.17).
Can anyone point me in the right direction? Thanks.

Hard to see it's so teeny. I needed a magnifying glass.
FWIW, you should not mark your reply as Solved because you did not solve your question. Helpful and Solved are used to reward the user who help you or solved your problem.

IPhone 5s connect to airport express but when I play in iTunes no option to pick airport ?

iPhone 5s connect to airport express but when I play in iTunes no option to pick airport ?

If anyone would like to know how to fix this, I discovered the answer.
I have no idea what IPv6 is and I care not, but apparently now, all of a sudden, Apple makes iTunes talk to Airport Express units using IPv6. However, it didnt bother to make the Airport Express units expect this first, so iTunes can see the Airport Express, but it cant talk to it.
Anyway, I found that you have to manually go into your Mac settings (scary stuff if you are a non technical person like me) and turn off IPv6.
To do this, go to "Finder > Go > Utilities > Terminal"
type
networksetup -setv6off Wi-Fi (hit enter)
Then type
networksetup -setv6off Ethernet (hit enter)
and magically your iTunes will talk to your Airport Express units again.
I presume at some point we will have to undo this as technology moves on and everything uses IPv6, so when that happens go into Terminal again and type
networksetup -setv6automatic Wi-Fi (hit enter)
Then type
networksetup -setv6automatic (hit enter)
Thanks Apple for that.

Considering an Airport Express, but have doubts

Hi,
I am looking for a solution that will enable me to print from several PC's around the house and an iBook to a EPSON STYLUS PHOTO R300.
I have an existing wireless network using a Netgear DG834G. All the PC's and the iBook connect through this and share files/folders.
If I were to purchase an Airport Express and connect the printer to it, will all the PCs and the iBook be able to print to it reliably? Would this play nicely with my existing wireless network?
(The printer will mainly be used by the PC's for printing photos and high-quality artwork/packaging.)

If I were to purchase an Airport Express and connect
the printer to it, will all the PCs and the iBook be
able to print to it reliably?
Yes, but you will need to use the latest drivers and you may find that certain utilities (such as ink levels) will only work if you are directly connected to the printer.
Would this play nicely
with my existing wireless network?
Yes
(The printer will mainly be used by the PC's for
printing photos and high-quality artwork/packaging.)
Some have found with other printers that this is sometimes not possible when a printer is connected to an Airport Express, but for most printers it is not an issue.
iFelix

My wireless iBookG4 sees my new Airport Express, but my PowerMac G5 won't!

My wireless iBookG4 sees my new Airport Express, but my PowerMac G5 won't!
I find this really strange. I have a cable modem coming in. There is an Airport Express hooked up to it. I use this to allow free movement about the house for my iBook, bhile my PowerMac g5 stays wired via ethernet.
Now I have purchased a second Airport Express for the living room, hooked up to BOSE speakers. The iBook sees the new Airport Express and can brpadcast iTues to it, no problem. The problem IS, I can't get the PowerMac to see the new Airport Express AT ALL--- it only sees the original one (the one that has the ethernet connected to it) PLUS--- the new Airport Express LCD flashes amber, not green... what is going on???

The new Express is not really on your network but is able to communicate with the laptop using Bonjour. Here's Apple's explanation for the flashing amber:
Startup is complete, but AirPort Express didn't get an IP connection. Depending on your setup, it may mean AirPort Express is out of network range, unplugged from Ethernet, lacks a path to the Internet (or local router), or that there's an issue with your Internet service provider.
Does your PowerMac G5 have an Airport card? If it does then it isn't associated with the new Airport. Both should be listed under the Airport menu but only one has a checkmark. If it doesn't have a card it won't be able to see the new Airport until you configure the new Airport as an extension of the first wireless network, called WDS or Wireless Distribution System.
Start here for more info:
http://www.apple.com/support/airport/

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?

Similar Messages

Maybe you are looking for