I have airport extreme as my base, how do I use linksys as the extender

You would need to connect the Linksys to the AirPort Extreme Base Station (AEBS) by Ethernet, and then, configure both of them for a roaming network.

Similar Messages

My Apple ID at the Apps store is messed up so. It identifies me by an email address that isn't current--I deleted it because of too much spam. I have a new Apple ID. How may I use it at the App store without losing all the Apps I,ve purchased undert

Question: I have changed my Pple ID. However The PPS Store insists that the cancelled ID is me, and trying to change either the name or password is an endless circle. The email account name I previously used was, I believe, hacked so I terminated the email account. So, apple no longer shows it.
Please help me. I want to get back into the App Store without losing all the apps I've purchased.

Welcome to the Apple Community.
Did you create a new a new account or just change the email address on your existing account.

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
http://support.apple.com/kb/HT1365
For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

Airport Extreme Dual-Band Base Station Is excessively slow

Let me start off by stating this is my first apple support discussion and I have no experience in these forums but rather forums elsewhere.
My Airport Extreme Dual-Band Base Station is completely updated as of DEC. 30, 2012 running version 7.6.1 and I have the latest airport utility, so bare in mind some of the previous fixes I've Read seem unavailable to my setup
Our household has 7-13 of the following devices connected in a 24 hour average:
5-6 iPhones all running iOS 6 (1, iphone 3gs; 2-3, iPhone 4; 2, iPhone 5)
1 iPad 2 wifi only running iOS 6
2 MacBook Pro 13" early 2012 models one running mountain lion and the other running lion
1 mac mini early 2011 model running mountain lion server and is connected outside the network as a public server
1 Apple TV latest model(1080p) latest updates
1 LG 47" 1080p 3D TV
3 blueray players
2 Windows 7 PC one a laptop and the other a desktop
1 HP All-In-One Printer
1 AT&T MyCell Antenna
My problem is as follows:
My network is running rather sluggish. the base station is getting at the very minimum good signal strength to all my devices most of them getting great signal, so I doubt it be the result of range. I've tried messing with the channels and radio settings but have yet to find a correct optimal settings. I've tried searching around these forums as well as in other areas and have not found a suitable solution. my apple TV lags and jitters a lot. I have trouble airplay to it because of what I've read elsewhere which is latency issues. I have no clue how to test latency. I have realized that it isn't a matter of noise in the area because noise doesn't pass 15% and signal is optimal in all areas. of where the devices are. I've noticed connecting my server directly gives me 47Mb/s as compared to the Ethernet connection of 32Mb/s so I am clueless as to a solution. I know that with my old router the wifi speeds were outstanding but that router kept disconnecting wifi clients and then reconnecting them. sadly this is happening again with the apple router. last night my iPad would not stay connected and our network had so much lag that I couldn't even load the youtube app let alone a video. also buffering takes an odd amount of time sometimes 3 minutes. for a 30 second video on youtube. I have no guest network active and I have a wpa2/wpa personal encryption set on the network. I could use some serious help. the people of my household have no problem returning the apple router but I think to urge otherwise. if I could get some help in a solution that would be fantastic.
Thanks in Advance,
Blaine Miller

Can you tell us whether your "modem" is a simple device with only one ethernet port or is it a "gateway", which is a combination modem/router with 3-4 ethernet ports?

HT3275 I have attached an external hard drive via usb to back up my OSX Snow Leopard. When I open Time Machine and click set up time machine, I then click Select Disk but there is nothing to select. No information is in the box. I do have Airport Extreme

Not sure how this all works but my problem is this: I have attached an external hard drive to my mac snow leopard 10.6 and am trying to back up my computer through Time Machine. When asked to select the drive as part of the set up, there is nothing to select. The box is empty. How do I set up Time Machine for back ups with an external drive? I am running Airport Extreme WI-FI (VERY confusing as I did not know the difference between Extreme and Capsule). Now to add another component...how does Icloud figure into all of this if I want to back up my computer systems, documents, etc? Is this a simplier way as long as I download Lion? Help!!!

Hello,
Problem is likely the Format of the External drive, for TM it needs to be Mac OSX extended Journaled & GUID Partition scheme for Intel based Macs...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html
There are other free options for backing up if interested!

I have AirPort Extreme connected for Wi-Fi.

I have had great luck with my AirPort Extreme to run internet on my Mac-Book Pro until the power to the unit was accidentally flipped off. Now, the modem is connected and the unit has a green light, but I can't connect to the internet on any computer in the house. I have unplugged and checked with the cable company, but it still is not connecting. Any advice?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up. Is there a list of AE/bonjour supported printers?

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up.
Is there a list of AE/bonjour supported printers?

Bonjour is a transport protocol. It also provides a means of advertising a printer on a network.
Any list that shows printers that support Bonjour is generally an indication that the printer itself supports this protocol, meaning that when it is connected to the network, you can see it in your default Add Printer browser. In the case of the Airport, it also supports the Bonjour protocol and will advertise any printer that is connected to its USB port. The printer itself does not have to support Bonjour. The Airport performs this function. And like many lists, they are not kept up to date because each vendor releases several new models every quarter or half year.
There are definitely printers that don't work when connected to the USB port of the Airport. And this is more that the printer driver does not support this type of connection, mainly due to the port not supporting bidirectional communications which some printer drivers require. The Canon UFR2 and CAPT drivers are a good example of this limitation. But this is only the Mac drivers. The Windows equivalent drivers work fine when the printer is connected to the USB port.
So with you having an issue with the Windows drivers then I don't think it is a case of them not supporting Bonjour but more to do with some other component not functioning when the printer is shared by the Airport. The error message appears to have more to do with local user rights which is probably driver related. I've seen some printers that you cannot use the Windows Add Printer wizard to add them. Instead you have to use the vendors utility because of some proprietary protocol being used. Maybe this is one of those?
Now that you seen how it should work based on when you used the C3188, if you still get that error message at point 6 of adding the C1025 then it would suggest a driver compatibility issue with the Airport - which is not necessarily a Bonjour compatibility issue. So unless there was another model of HP printer driver that you could use to this C1025 and that was also compatible with the USB port of the Airport Extreme, then I would suggest your best action is to replace the printer with a model that does work. Maybe even one that has builtin wireless so you don't have to use the USB port of the Airport.

Is my AirPort Extreme (802.11n) Base Station defective?

I'm trying to set up a wireless network with my new AirPort Extreme (802.11n) Base Station. I dismanteld my existing network that consisted of an old model AirPort Extreme and an AirPort Express. I can't seem to get anything to work properly with the new hardware. I have a G4 Quicksilver that uses an AirPort card. Is that the issue? I thought they were compatible. I was not able to update the Setup Utility because I don't have an Intel Mac. Still, that shouldn't prevent me from doing an initial setup. I'm thinking perhaps the unit is defective. I've been working on this several hours a day for almost a week. This is the most trouble (by far) that I've ever had with any Apple product. I'm really disappointed. I suspect the hardware is defective, but based on all of the issues I've read about in this forum, I think it could just be reflective of the poor overall quality of the new AirPort Extreme. What a let down.

What is the exact name of the application you are using to configure the airport?
You should be using "AirPort Utility"
It is a Universal application, so it should work on both a PPC and Intel mac.
As for the update, if you can't download it via software update, you most likely do not need it.
The quicksilver only has an Airport card:
http://support.apple.com/specs/powermac/PowerMac_G4_Quicksilver2002.html
That means that you will need to configure the airport extreme N to operate in the 2.4 GHz range. You will need to tell it that it needs to be compatible with 802.11b
There is probably an option for 802.11 b/g/n compatibility.
Are you going to still use your airport express? you could either use WDS to extend your wireless network without connecting the two airport base stations with an ethernet cable... or you could connect them together with an ethernet cable and configure the same network name and use two different channels (only use 1, 6, or 11). If you extend a network, they both need to use the same channel.
If the quicksilver is the only machine on your network, it will not be any faster.
Actually, you could make things faster, now that I think about it... I am guessing that your quicksilver is not located near your airport extreme. If I am wrong, just ignore this...
You could use one of your airports as your main base station, connected to your cable modem/dsl whatever... then you connect the other airports ethernet to your quicksilver. you then turn off the airport card in your quicksilver and set up the airport connected to your computer to use WDS and connect to the other airport using 802.11g.
You now have gone from an 11 mbps max (5 mbps real world) connection to a real world 30-40 mbps link.
Other options would be to look for 802.11g or 802.11n usb adapters for the quicksilver... I am not sure what is mac compatible out there, since it is probably a small market since it is built in to all new macs.
Good luck

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device. If so would I have to format it with two partitions , one for time machine and the other for network storage. Aprreciate any advice

If you have the hard drive connected to the AirPort Extreme....it is a network storage device.
One issue that you may want to think about is that Apple does not support Time Machine backups to a hard drive at the USB port at the AirPort Extreme.
In spite of this, some users who try this are able to make it work. Others have some limited success and some have no success.
It's not supported....so there will be no help from Apple in the event of problems.
If you decide to proceed with this, make sure that the partition for Time Machine backups is formatted in Mac OS Extended (Journaled) as other formats will not work with Time Machine.
Having a secondary backup plan would also be something that you might want to consider.

I have airport extreme and have windows 2003 what program do i down load for airport utility

can any one help i tried one but was for windows 2007 no good need it for windows 2003 i have airport extreme just bought it today

Ok thanks for the info - I am only familiar with Windows so I am going to suggest a typical setup using your Toshiba laptop - you can then use the network with any device - tell me if this works for you.
Determine which version of Windows that your Toshiba uses.
Go to http://support.apple.com/downloads/#peripherals
You will be downloading Airport Utility
Download version 5.6.1 for Windows 7 or
Download version 5.5.3 for Windows XP or Vista
Once you have done this let me know if you will be using this Extreme as your primary router after your modem or is your modem also acting as a router or do you have another router anywhere in your network

Can I update firmware on Airport Extreme? If so, how?

Can I update firmware on Airport Extreme? If so, how?

Please check out the following Apple Support article for details on how to update AirPort firmware.

Airport Extreme 802.11n Base Station blocking RealPlayer 11 completely

I am trying to play this radio station (just a brasillian sports channel) on RealPlayer 11:
rtsp://real.rbsonline.com.br/liverbs/*/broadcast/rdgaucha/gaucha.rm
Which is completely blocked on my Airport Extreme 802.11n Base Station with the latest firmware update.
It even blocks when RealPlayer is configured for HTTP only.
I am using it on my iMac which is connected directly via a ethernet cable instead of wifi to the Airport Extreme 802.11n Base Station.
RealPlayer can play it fine when I plug my iMac directly to the cable modem so it proves is the router. I never had RealPlayer issues before when I was using a linksys router.
It does really feel like Apple put an intentional block on RealPlayer to stop competition.
Anyone seen this issue? Guess it is related with the BBC RealPlayer issue.

Fixed myself, problem was because I setup OpenDNS on base station, removed it now works

TS4597 I am using an Airport Extreme as my base station and I want to extend its range using a recently purchased AirPort Express. However neither device is showing up on my AirPort Utility on either my older MacBook Pro or my IPad 4. What do I do?

I am using an older AirPort Extreme as my base station and I want to extend the range by using a recently purchased AirPort Express. When I try to find either device using the AirPort Utilities function on either my new IPad 4 or my older MacBook Pro neither device is detected. However the utility is seeing that we are connected to the Internet which is through the Extreme. What am I doing wrong?

For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress.

My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.

My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.
I have tried resetting my airport extreme, creating a new network, etc nothing seems to work.

I have a feeling you may be stuck in bridge mode there...
Factory reset the Extreme (so we don't second guess later), and re-set up the extreme using iOS5 on your iPhone.
Set up your Wi-Fi network with your iPad, iPhone, iPod touch, or Mac.
http://www.apple.com/airportexpress/features/easy-setup.html

I have airport extreme as my base, how do I use linksys as the extender

Similar Messages

Maybe you are looking for