I have all my clips with an extra edge around the top and bottom I want to remove

As you can see from the image below, I have all my source videos recorded at 1024x820.  I want to, using Premiere clip this to 1024x768 removing some from both the top and bottom.  I'll have hundreds of clips of this shape (1024x820) I will import into premiere.  Is there some kind of transformation I can do that will clip the top and bottom so that my exports come out at 1024x768?  I don't want to shrink the full picture, I want to clip the top and bottom edges cleanly.

All I am doing is the following:
import my mov file that is 1024 x 820
create a sequence that is 1024 x 768
export the sequence
I made a video showing the steps (very boring, sorry).
I'm sure there is something simple I'm missing. i'm 99% sure my result is wrong from the looks of it in the movie player.
here is the video:  https://www.dropbox.com/s/5wjs8p3v0sjh8uv/livewriterdemo_fromcamtasia_final.mov

Similar Messages

  • Is there any way I can get the pictures on my iPhone 5c to be the whole screen instead of with a black band across the top and bottom?

    My new phone only let's me take pictures with a black band across the top and bottom instead of the whole screen, does anyone know how to change this?

    AJ Green wrote:
    My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing.  You need to enable location services.
    Your wifi-only iPad does not have GPS. Read the specs for your device.

  • I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound??

    I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound?

    Not all the sound docks accept both analogue and optical on the auxillary input - I don't think the portable ones does but may be wrong - check the user manual.
    As I said earlier all the mini optical (min Toslink) adapter does it make the optical connector fit a smaller socket, it does not convert digital audio to analogue for an analogue only auxillary input.
    AC

  • Hi All, I have new iphone 4s and want to import my contacts from my old Orange SIM (the contacts have all been copied to SIM). I enter the SIM and select "Import from SIM" in the settings -- Calendar, Contacts etc it look like Ok but nothing copied,helpp

    Hi All, I have new iphone 4s and want to import my contacts from my old Orange SIM (the contacts have all been copied to SIM). I enter the SIM and select "Import from SIM" in the settings --> Calendar, Contacts etc it looks like Ok but nothing copied,I tried hundreds of time and waited 2 day but still nothing and I again made sure that I do have the Contacts in the Microsim and it is there but cant import? dunno why???

    I have never used it, but have heard good things...
    http://www.littlemachines.com/

  • Why does the top and bottom of my clips get cut off?

    Hi, I'm new to iMovie and I've encountered an annoying problem. I imported all my movie files from my flash drive without any issues. I dragged a clip from the section with all the clips to the play reel. I previewed the clip, both normal screen and full screen, and both times the top and bottom of the clip was cut off. I tried it again with different clips but the same thing kept happening? Can anyone tell me why this happens because my head keeps getting cut off and I don't like it one bit.

    First, you can go into File/Project Preferences and adjust the aspect ratio of your project to either widescreen (16:9) or standard (4:3), to match your footage.
    You can combine footage that is widescreen and standard in the same project. In this case, you have to tell imovie how to handle the clips that do not fit the overall project aspect ratio. To do this, you can select a clip in your project and use the Rotate, Crop, Ken Burns Tool. If you select FIT, it will preserve the whole frame by inserting black bars (letterboxing). If you select CROP it will cut off the top and bottom. You can select the default for this in Project Properties.

  • HT204088 Using my ipad 3, with ios6, I can access the itunes store and the App store when I press the icons, but the viewing pages are blank. I can see the toolbars at the top and bottom. The pages are blank for every tab. Help. The ipad works fine, other

    Using my ipad 3, with ios 6.0, I can access the itunes store and app store by pressing the icons, but the screens are all blank pages, I have tool bars at the top and bottom of the viewing screen, but when I touch the individual tabs, the viewing screen is either white or dark grey...nothing else appears. Help.

    Having the same issue, can someone please enlighten us?

  • I have an 11" Macbook Air. When I use Garageband it opens in a window so large that the bottom corner is not accessible so I can't decrease the window so that I can see the top and bottom of the window at the same time. Any suggestions?

    When I use Garageband the window is so large that I can't reach the bottom corner to decrease the window to fit inside the display so that I can see the top and bottom of the window at the same time.
    Any suggestions?

    You can reduce the window by grabbing any edge or corner.   You don't have to use the bottom right anymore.
    You could also temporarily move the dock to the left/right so you can reach the bottom.

  • How do I add subtitles like what you see in a movie with black scripts both at the top and below?

    How do I add subtitles like what you see in a movie with black scripts both at the top and below?

    thank you so much that was it :). im retarded though i need to look this stuff up in the api. sorry just starting out and useally find things in the api like 75% of the time

  • HP PSC 1610xl All in One - when printing it seems to not print the top and bottom of document on eac

    Ex: when I print out a mailing label, the top and the bottom of the label are either faded out or non existent. 
    Please advise.
    Thank you.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • TS3694 My IOS is 4.3.5 and i have jail broken the iPhone and now i want to remove the jail brake and update my IOS to 6.1.2 and i cannot upgrade the software or restore the software, i keep getting the 3194 error and i even tried to while in DFU mode, sam

    i have tried to upgrade the software and i get the 3194 error message, i have tried restoring and i got the same error and i also tried while in DFU mode and still got the same 3194 error message.
    I really want to remove the teathered jail break and upgrade the software so if anyone knows how to get that done please let me know i would really appreciate it.
    Thanks in advance

    http://support.apple.com/kb/ts3694#error3194
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • My songs on ipad have a red circle with a red square in the middle and they don't play anyone know what is happening?

    Several  songs have the cloud symbol with a red arrow and I think they play. But the ones with the red circle and red square in the center do not play. Can this be fixed> What does it mean?
    Thanks in advance,

    See this Apple support document.
    http://support.apple.com/kb/ts1463
    You'll notice that the problem is usually associated with a failed/damaged hard drive, meaning you'll likely need to have your iPod serviced if you want to get it working again.
    B-rock

  • Wierd printing problem.  I have a TIFF file from a color negative scanned some years ago into Photoshop. Photoshop version probably CS2. Now printing from CS6. It prints with a black line around the image and mid grey outside that. Margins are white. Imag

    Any suggestions as to how to fix this, please?

    My printed colors look wrong. | Mylenium's Error Code Database
    Mylenium

  • IMovie is outputting my movie with big black bars at top and bottom that I don't want

    Quicktime: Ver 10.3
    iMovie: Ver 10.0.5
    OS: OS X Ver 10.9.4
    So, let me try and explain...
    I have recorded gameplay footage of my game directly from my Mac screen using Quicktime's Record Screen option. I've tried recording both in fullscreen mode (with my game also running in fullscreen mode) and a section of the screen by dragging the mouse to select a 640X960 box (with my game running in windowed mode which is displayed at 640x960 resolution).
    This initial recording direct from the screen displays fine, both when I view it in windowed mode and when I view it fullscreen, with the height of the game stretching to the full height of the video area but obviously with big black borders to either side in fullscreen mode (as it's basically iPhone ratio in portrait mode).
    WindowedFullscreen
    This ^^^ is how they should look.
    The problem is when I try to import the movie into iMovie, mess around with some fade-ins and music and stuff and then output the edited movie via iMovie...
    When I then try to view this outputted movie in windowed mode on certain sites (Kickstarter) my game footage doesn't take up the full height of the video and instead floats in the middle with big black bars at the top and bottom, which I don't want. It's fine when I go fullscreen but the problem is that when I load this video into Kickstarter it shows the non-fullscreen view of the video with this big black border and it looks really amateur.
    This is what Kickstarter shows in windowed mode i.e. the way you see Kickstarter videos by default when you press Play; unless I go fullscreen and then it takes up the full heigh of the view.
    Note: Windowed mode actually looks fine when viewed directly on my Mac but I know it's not Kickstarter that is causing the issue because I can see in the thumbnail preview on my Mac that the video is somehow encoded with the big black bars at the top and bottom. Also, I uploaded the unedited videos to Kickstarter just to check and they display fine. So it's definitely iMovie that is adding these annoying black borders at the top and bottom for whatever reason (and I'm not intentionally scaling the video down in iMove or anything like that as far as I know). I also can't use the unedited footage however because it has no sound and no transitions etc.
    Does anyone know what night be causing this and how to get rid of it.

    You are lucky to see anything - iMovie 5 is not really compatible with Snow Leopard, which only supports iMovie 6 and above.
    Snow Leopard only runs on Intel Macs. iMovie 5 was never written, AFAIK, for Intel, just for the PPC Macs they had in those old days!

  • How can I edit multiple clips with different frame rates on the same timeline

    how can I edit multiple clips with different frame rates on the same timeline

    You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
    Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
    You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
    The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
    Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
    Have fun.
    x

  • Using PNG format with max width without clipping top and bottom of image?

    I am using PNG format to preserve the transparency and drop shadow I am trying to incorporate to give the illusion that this slab object is floating above the other layers.  I first tried file>place to position the menu object on edge of header/beginning of content.  Doing that leaves no options to force the image to span the width of whatever screen.  I need that so I've tried using object>fill> and then clicking the max width of the rectangle (which does solve the max width problem), but I am now dealing with a clipping problem of the top and bottom of the image.  The next thing I can think of is to go back to Photoshop and distort the image so it isn't as tall.  I feel there has to be a simpler way to accomplish this that won't also give my image a unnatural look.  Thoughts?  Thanks in advance.

    Thanks, that helps.  I also found that I cropped to much of the canvas.  After increasing the canvas area AND setting to fill all is well now.  I think your suggestion may help with the scrolling affect problem I'm having when using different resolutions. I am going to try to set the size in one dimension (height) so that different resolution screens see the same scroll actions.  Thanks Mylenium!

Maybe you are looking for