I have aMacBook Pro with Mountain Lion operating system. Does MacKeeper work well with this Operating System

I have a MacBook Pro with Retina Display. My operating System is Mountain Lion 10.8.5  Does MacKeeper work well with Maontain Lion 10.8.5 and provide good Virus protection? Appreciate the support. 

The Hatter:
Thanks for the input.  So far the responses I've received are all the same. I will not be purchasing MacKepper.
Beracha007

Similar Messages

  • Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    You may need a 3rd party application to view the DVD in a wWindows format such as
    http://flip4mac-3.en.softonic.com/mac
    https://www.macupdate.com/app/iphone/5758/vlc-media-player

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • Does Lightroom work well with hiDPI Windows 8.1 touchscreen ultrabooks?

    Hi all,
    My old laptop is on the fritz, shopping for a new one.
    Apart from the Web, the application I use the most is Lightroom.
    I've been interested in the nice new ultrabooks, but I'm wondering: does Lightroom work well with hiDPI Windows 8.1 touchscreen ultrabooks?
    Is hiDPI advantageous, or actually annoying?
    What can you actually use touch for in Lightroom, and does it improve your workflow?
    Thanks kindly!

    I am not 100% sure whether lightroom supports HiDPI on windows but on Mac OS X it is absolutely fantastic (I use a retina MBP). So I would see if you can try it out somewhere. My guess is that Lightroom supports it on Windows too and then I can highly recommend it.
    No clue if touch works well or not for Lightroom. My guess is not as almost always using touch in applications that were not designed for it is very kludgey.

  • Hi... i have iphone 5. my phone shows me the apple broken and does not work well . what this means? deppy

    hi... i have iphone 5. my phone shows me the apple broken and does not work well . what this means? deppy

    despoina kiato wrote:
    καμία φορά σταματάει να δουλεύει. σβήνει το κινητό και  μου δηχνει το μήλο σπασμένο.  απενεργοποιήτε  μόνο του . αυτό είναι όλο .
    Englidh would help.

  • I've got a new iMac with Mountain Lion OS.  Created a slideshow complete with music in iPhoto.  Every time I try to export to iPhoto slideshow folder, it freezes.  Help!

    I've got a new iMac with Mountain Lion OS.  Have created a slideshow complete with music in iPhoto, but every time that I try to export it to an iPhoto slideshow folder, it gets halfway through and freezes.  This has been going on for a couple of days.  I've tried opening iPhoto holding down the option key, but it doesn't make a difference.  Any advice, please?

    Upgrade to v9.4.1 or
    Trash the HP Plug in from /Library/Application Support/iPhoto
    There are two libraries where this plugin might be
    HD/ Library
    and
    HD/Users/Your Name / Library
    (On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)

  • Can I use my old AIr Port Extreme with my new Mac Pro with Lion installed? It has worked well with the G-4 that I'm replacing.

    Can I use my old Airport Exteme with my new Mac Pro with Lion installed? It has worked well for years with my G-4.

    I'm smarter now. It worked fine.

  • Does Photoshop work well with retina display?

    I am returning a PC notebook because Photoshop UI is too tiny for practical use with hi res PC notebooks (crazy, but very true) . Before I buy an Apple (Macbook Pro), can someone please confirm that Photoshop works well with retina display monitors? I need reassurance before I waste my time and money on another laptop. Adobe has already cost me hundreds in restocking fees for a notebook Photoshop will not support. 

    Im hoping to clear up some confusion with regards to Retina display support in Photoshop CS6. In December,  Adobe released Photoshop update version 13.0.3 (for Mac perpetual customers) and version 13.1.1 (for Creative Cloud members, Mac and Windows). So, if you have PSCS6 – through either the perpetual (“box copy”) or Adobe Creative Cloud membership (“subscription”), and you run the updater, you will have Retina support.  Here’s how to get the update:
    1. In Photoshop, choose Help > Updates.
    2. The Adobe Application Manager will launch. Select Adobe Photoshop CS6 and choose Update.
    How to confirm that the Update worked
    1. In Photoshop, choose Help > About Photoshop (Win), or Photoshop > About Photoshop (Mac)
    2. For Mac perpetual customers, the version at the top should be Version: 13.0.3
    3. For Win/Mac Creative Cloud members, the version at the top should be Version: 13.1.1

  • Help, my Bridge does not works well with my AfterEffect. does not preview .ffx files

    Hi,
         I have some problem with my Bridge. When i browse preset from my After Effect in Bridge, it won't preview all of the After Effect preset(*.ffx), but my Bridge works well with photoshop files, it will preview all the photo files inculding .PSD. Does anyone knows what's the problem? Anyone knows how to fix it? I need help to fix this problem to get my work in AfterEffect, it is very hard to get things work it won't preview the preset. Thanks.
    Best Regrads,
    Chongkkmy

    Found this link, does it address your problem?
    http://forums.adobe.com/click.jspa?searchID=769246&objectType=2&objectID=1794899

  • New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

    I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
    Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
    If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
    If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
    Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
    Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
    Has anyone else run into similar issues?
    Robbie Gilbert
    [email protected]

    I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
    I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
    And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
    Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
    JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
    In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

  • Upgrade to mountain lion, time machine does not work

    After upgrading to Mountain Lion.  My time machine does not save infomation anymore.  I've also lost a folder on my macbook pro.  This is the error message that I'm receiving.  Please help
    Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time  using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65c900560 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time  using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65b209e10 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time  using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65cd08190 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.

    That seems unusual unless you changed drives.
    If you upgraded the drive it sees the computer as a different one to the original backup..
    I am not sure that it isn't better to do a fresh backup but you can try and inherit the old backup..
    See Pondini
    B5 B6 http://pondini.org/TM/Troubleshooting.html

  • Mountain Lion Kerberos GSSAPIDelegateCredentials does not work against Solaris Machine

    Hi,
    After upgrade my systems to Mountain Lion the ssh option GSSAPIDelegateCredentials fails when tries to login in a Solaris 10 machine. The ssh client close the connection after the message "Delegate credentials" when runs in a verbose mode. The server side says "child closed the communication pipe before user auth finished"
    Using only the option GSSAPIAuthentication it works, but I need the credentials delegated because in the Solaris server I need that credentials to be able to mount the network home disk (security reasons).
    Using the same configuration in a Lion client, this option works well (like in Snow Leopard and Leopar, but that OS uses MIT distribution instead Heimdal).
    If the server is a Linux box, instead Solaris, and using MIT Kerberos distribution, the GSSAPIDelegateCredentials works too.
    Any idea about how to fix this Bug? Or I have to wait to the next patch release?
    Thanks in advance
    H.

    Boot into Recovery (command-R at startup), launch Disk Utility, select the startup volume, and run Repair Disk (not Repair Permissions.) If any problems are found, repeat. Then reboot as usual.

  • Does cubase work well with MacBook pro?

    Looking into buying a MacBook pro and wondering if using it for music and running cubase through it is good?

    I have been using Vistitle a lot on EDIUS and have also produced some videos on its basic use that you can see on YouTube.  I am also a reseller but I do sell all the other titles programs as well so am pretty objective.
    I do think Vistitle is brilliant and quick.  It is quite "after effects" like in its interface and can do a gue amount of things.  I could do most of the same things in After Effects which you may have if you are on the Cloud or have a Production Premium, although I find no easy way of doing the particle effects that Vistitle has in After Effects and the 3D text is quicker to render for me.  The main advantage I find is speed and ease of use since it is working directly in Premiere as opposed to using the AE dynamic link.
    The have also just prodcued a trial versions which you can use and see how well you get on with it : http://www.vistitle.com/listdownload.asp?id=62
    Vistitle uses a dongle for copy protection so if you decide to buy it you will need something physically sent to you - which may or may not be a problem where you are with Christmas coming.  In the UK, where I am, this means you would have to order it before the end of next week, or wait until next year.

  • Does VisTitle work well with Premiere Pro?

    I want to edit titles with 3D and other effects. But I am quite disappointed in Premiere Pro's title tool. And a colleage recommended VisTitle to me. Anyone used it? Any good?

    I have been using Vistitle a lot on EDIUS and have also produced some videos on its basic use that you can see on YouTube.  I am also a reseller but I do sell all the other titles programs as well so am pretty objective.
    I do think Vistitle is brilliant and quick.  It is quite "after effects" like in its interface and can do a gue amount of things.  I could do most of the same things in After Effects which you may have if you are on the Cloud or have a Production Premium, although I find no easy way of doing the particle effects that Vistitle has in After Effects and the 3D text is quicker to render for me.  The main advantage I find is speed and ease of use since it is working directly in Premiere as opposed to using the AE dynamic link.
    The have also just prodcued a trial versions which you can use and see how well you get on with it : http://www.vistitle.com/listdownload.asp?id=62
    Vistitle uses a dongle for copy protection so if you decide to buy it you will need something physically sent to you - which may or may not be a problem where you are with Christmas coming.  In the UK, where I am, this means you would have to order it before the end of next week, or wait until next year.

  • Mail does not work well with lion

    Cannot shut off my computer because Mail does not close since i installed lion

    Cannot shut off my computer because Mail does not close since i installed lion

Maybe you are looking for