I have an 8300 a3 printer driver for vista not working

hi all
when i download the driver for the 8330 or 8350 for vista they dont work
when i opened the startup information is says 5100 series for windows xp does anyone have a solution for this
thankyou

Make sure your scanner is on. Go to System Preferences > Printers & Scanners
If you've been using your scanner before the update, then you should see your scanner in the left-hand sidebar. (If not, you'll have to add it by clicking on the + sign.) Click on Open Scanner. It will scan, but I would rather not have to go to System Preferences to scan.
Solution - use application Image Capture, a default Mac app in your Applications Folder. Drag it to your Dock. Launch application. You will find your scanner under Devices. VOILA!
It's not the same Epson Professional scan window I'm accustomed to using. It's now a part of Image Capture. The Scan interface is much cleaner.

Similar Messages

Do you have a Dell 1720 Printer Driver for OS X Yosmite

My Dell 1720 Printer does not work after loading Yosemite, is there a new driver available for this hardware?

Hi..
Sometimes a reset will help after an OS X upgrade regardless of drivers > Mac OS X: How to reset the printing system

Network Controller driver for T42p not working

We have a T42p (type 2373-HTU) that had a new copy of WinXP Pro installed on it, wired network is working but wireless is NOT working.
In Device Manager, the network adaptor is showing up as working and it is (Intel PRO/1000 MT Mobile Connection) working fine on a wired connection. The Bluetooth works when you Fn-F5 it on. My problem is that the Network Controller has the infamous yellow question mark on it and I have been through every single driver on the Lenova site for this particular laptop (2373-HTU) and none of them work. I did follow the install instructions and still have the same problem. I assume this is why the wireless networking is not working. I do have an icon in Control Panel for Wireless Network setup wizard. There is no off/on switch for wireless on this model. I have been in the BIOS and there is no way to turn wireless off/on in there either. As far as I know ... this particular model does have a wireless card installed.

Welcome to the forum! These were the original specs of your T42p:
P M 745, 1GB RAM, 60GB 7200rpm HDD, 15 UXGA(1600x1200) TFT LCD, 128MB ATI FireGL T2, CD-RW/DVD-R Multi-Burner(slim), Intel 802.11b wireless, Bluetooth/Modem, 1Gb Ether, UltraNav, Sec Chip, 9 cell Li-Ion Batt, WinXP Pro
The driver, presuming you're running XP:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/1rwc89ww.exe
After downloading and extracting the driver, you must go into C>Drivers>Win>Wlanint and run the setup file from there.
Quite a few users have reported issues with Intel 2100B card under XP SP3. You may want to consider getting a newer card, they are quite inexpensive nowadays.
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Printer Settings for Epson not working in LR and PE 12, crashes programs when I click.

In LR 4.4 and PE 12, after I have set all my color management info in the program's print panel to the Epson printer and to the correct paper, I go to Page Setup, select the paper size and printer, then Printer Settings, select Printer, then attempt to select paper source, nothing happens, then attempt to select paper media, then the programs crash.

my problem is now solved. I got with Epson support. We had to remove the printer from the printers/scanners in the Preferences section of the iMac HD after unplugging the usb cable. Then, we went to the disc utility in Applications folder and performed a disc repair. After that we connected the printer, rebooted, opened PE12/LR4.4 and, voila, the paper source and media type now contained the appropriate info. Something was not right in my system, one of those mysteries.

Formatted WD Elements external hard drive for mac, not working

Hey.
So i recently got a new television and found that i could plug my WD Elements hard drive into it and watch my movies etc.
the hard drive hadnt been updated in a while, so last time i had updated it was before we got a mac. i plugged it in the other day to put new things on it and my mac recognized it but it said it was read only and wouldnt allow me to put new things onto it. After doing a bit of googling i realized i needed to format it. I thought i would give it a go see what happened. after looking on the forums i formatted it through either exFAT or NTFS. and my hard drive changed to read & write and i could put my things onto it. But when i plugged it into the tele it said no media was found(still recgonized my hd though)
I'm guessing ive done something wrong. i just don't know exactly what. any tips or suggestions on what to do next would be much appreciated! thanks
oh and my mac's version is 10.9.1

You did nothing wrong, you just need to find a format that can be shared by the Mac and your TV.
Mac can work with Mac formats (HFS), and Windows formats (FAT and NTFS), but NTFS will be only read only.
So your TV set, read NTFS but perhaps not FAT?, and your mac cannot write NTFS.
In order to write to NTFS devices, you must install one and only ONE of this comercial software:
Tuxera or Paragon

Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?

What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

HT1338 Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

You may be able to download it fom here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

The print driver for HP Laserjet 3380 that was print only was removed from my iMac, and now when try to download driver, it states to contact manufacturer. I have old driver on Time Machine, can I reinstall that old driver that worked?

The print driver for HP Laserjet 3380 was for print only, was removed and when I went to download from apple, it stated to contact manufacturer. I have old driver in Time Machine, how do I reinstall from Time Machine that driver that worked?

Hi,
Trible post. Please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-solution-center/m-p/4790405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there a Macintosh OS 8.6 or 9.0.4 printer driver for an HP PSC 2355?

Dear Ladies and Gentlemen:
I know this is very old {don't laugh}, but I was looking for a Macintosh OS 8.6 or 9.0.4 printer driver for my recently purchased HP PSC 2355 All-in-One printer.
I run OS X 10.5.8 on an Apple iBook G4 and also run a Mac OS 9.0.4 emulator on it called SheepShaver. Trouble is SheepShaver will only run up to Mac OS 9.0.4 and the HP PSC 2355 minimum drivers are for Mac OS 9.1.
I would love to be able to print from SheepShaver and the scanner features are unimportant to me under Mac OS 9.
Are there printing drivers (even from a different, but compatible printer) that would allow me to print from this printer under Mac OS 9.0.4?
Thank you so much!

Hello,
When you say you recently purchased the PSC 2355, i believe this is a very old printer.
I am not sure on how the SheepShaver works but we do have the printer driver available for 10.9 on hp.com. The first link mentioned below will take to the product page. Rest all are some of the InkJet and DeskJet drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=13&lc=en&cc=us&dlc=en&sw_lang=&product=422000...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-13822-2&cc=us&dlc=en&lc=en&...
Thanks
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

Can't find a printer driver for LaserWriter Select 360?

My older G4, which I just upgraded from OS 9.2 to OS X10.3.9 (I was reluctant to leave PageMaker), doesn't have a printer driver for my Apple LaserWriter Select 360. It finds my Epson 2200 with no problems. I've tried two shareware programs. The first seemed to say that Apple Printer Drivers were missing and that it had reinstalled them (but I don't remember the name. I found it in one of the threads here). But there was no sign of the LaserWriter when I tried to print. The second program I tried was Pacifist, figuring I could just reinstall that one printer driver from the Panther disks. But I couldn't see it anywhere though there was two Epsons, Hewlitt Packard and others. I tried the Apple website, but had no luck. I know there is one because two other computers we have in OS Xs can recognize the printer. Is there a driver out there I can download or is there someway I can get it off the other computer I have that is in 10.3.9? It's really frustrating to have to transfer the regular stuff I want to print to another computer.
Thanks!! Jane
G4 Mac OS X (10.3.9)

We're halfway there...maybe! The printer shows up on the list, but when I try to print something (I tried an InDesign file, also a Word one), the computer sends the file and the printer starts, but then puts the job on hold (the green light on the printer never blinks). If I click Start Job, the same thing happens again.
When I looked at Help and found "Setting up to print to an IP Printing network printer," it said to "type the IP address or DNS name for the printer in the Printer Address field." I looked through my "User's Guide" and didn't know what that was. It wouldn't let me "ADD" the printer without one so first I typed in the whole name of the printer that was on the list below. Then it let me ADD, but not print. Then I tried it again with the word "home." Same thing, it added the printer but wouldn't let me print.
One other question I had was when I got to the Add Printer, IP Printing, I had to choose a "Printer Type." It was on LPD/LPR so I left it. I didn't know what any of the choices meant. Perhaps that was wrong.
Now that the LaserWriter is on the list, can we make it print?
Thanks so much, Jane

Printer Driver for HP Laserjet 1200 Printer

I got a Windows 7, 64 bit PC. I wanted to install HP laserjet 1200 Black and White printer to my PC, which was installed to a windows XP,32 bit OS. I got the Printer's Driver CD also with the product. But it is a 32 bit Application. I wanted to download the 64 bit Application and install the printer to my PC. But the links which are available in the HP official site does not work. can somebody tell me a solution for this or is there anyone who can send me a link to download the Printer Driver for windows 7 /64 bit OS..... If somebody is willing to help, I would be so great full.....Thank You...

Hey,
I see you are wanting to install an HP Laserjet 1200 on your Windows 7 64bit PC. I also see that the downloadable drivers are not working for you. Have you tried installing the driver located in the Windows Add a Printer: Windows Update section? For information on how to perform this type of install please read the article linked below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
Let me know if this method successfully installs the printer for you,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Mac OS 10.5 Bonjour Unable to find printer driver for P1606dn connected via wired network.

I have been trying to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8. I connected the priner to my LAN via Ethernet cables and NetGear 8-port switch. I then successfully installed the printer driver from the supplied CD on the Mac and went to System Preferences / Print & Fax to add the printer to the list of connected printers. Hit the "+" button. The HP P106dn was listed in the table (Kind = Bonjour).
I selected this entry in the table, and the dialog box immediately went into action: the "Print Using" pullodwn listed the greyed out message "Please select a driver or printer model" and a spinning wheel labeled "Searching for new drivers" appeared below it. The dialog box searches for but never finds the printer driver (I waited 20 minutes with no success). I have installed other HP printers this way on this machine without any problem, e.g., HP Color Laserjet 2605dn. Why is this method not working with this printer?
I was able to connect this printer with other (Intel) Macs in my household via this LAN arrangement. Is the printer driver for Intel-only Macs?
I disconnecting the printer from the LAN and connected it directly to my Mac with a USB cable. Followed the same process, and I was able to connect to this printer. Successfully printed a document page. While this provides me with a work-around for the G5 Mac, I need to share this printer with the other Macs in my household.
I went to the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on the Mac, and repeated the steps for the LAN arrangement (above) to complete the connection via the Print & Fax dialog. The result was the same: spinning wheel searching for a printer driver that it cannot find.
I do not know what else to do, or why this installation will not work. I would appreciate it very much if anyone could offer an explanation for this or some suggestions as to what else can be done?
Ed
This question was solved.
View Solution.

I apologize for the delay in responding to you. I was on the road all day yesterday.
OK. I switched the printer's Ethernet cable to a Linksys Switch (Model EZX S55W) that's part of this local network. That did not work. I swapped out the cable for one that I know works. Still no change. I switched the printer's Ethernet cable directly to a port on the router. No change. I even swapped cables here, too, but no success.
As I was doing all this, I was wondering: When I select the HP P1606dn printer in the Print and Fax "Add" dialog box, (see the image below) and the Print Using pulldown menu displays "Please select a driver or printer model" and the message "Searching for new drivers" appears under it (with the spinning wheel), why is it that the Ethernet connection to printer is critical to "finding" a new (printer) driver?
Isn't the utility searching through my system and libraries looking for a printer driver app for the printer that I identified/selected in the dialog box?
After all, if the dialog box lists the printer among those to choose from, hasn't the utility already discovered the printer via the Ethernet connection?

Printer driver for Hp Color LaserJet 1600 ???

I have an Hp Color LaserJet 1600 printer. Best printer i ever had.
Where can I find printer driver ?
Checked a few Hp and apple site and every printer inthe world except this one seem to have a driver.
my OS is 10.8.4

Found these by doing an easy 5 second Google search. You should try it sometime...
http://forums.macrumors.com/showthread.php?t=228510
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/C olor-Laserjet-1600-Printer-driver-for-Mac-OSX-10-7/m-p/2391335#M43702

Print driver for HP Designjet 5500 (Model Q1251A)

Looking for print driver for HP Designjet 5500 (Model Q1251A), non-PS (post script) printer for MacBook Pro, OS X 10.7.5. Current drivers on HP web support does not have driver for the non-PS printer and directs me to Apple's support site, but can't find location to look for a driver.

Hello ..
Try here > OS X: Printer and scanner software available for download

Windows 7 in OS printer driver for Deskjet 6840 not printing properly

The Windows 7 (32 bit) in OS print driver for the Deskjet 6840 produces print in "Normal" mode that is blurred (not properly registered left to right and slightly vertically). When printing in "Draft" mode it is apparent that the driver is not setting the left and right margins correctly, so that each line is alternately shifted left or right on the page. If I switch to a 500C driver, the printer works fine (but of course high res images do not print properly). This is occuring on two wired network computers, both running clean installs of Windows 7 professional with all current updates including Service Pack 1. Microsoft says, "It's a HP printer, it's their problem". I'm just looking for an answer. Anyone have experience with this?

Hello Bhl3302,
Thanks for posting at NI forums! I think you should follow RavensFan advice on contacting the vendor for information on the driver’s support, or if you have a readme file, you could check on that. Also, are the Windows XP and Windows sharing the same architecture (32 or 64 bits)? Maybe the driver is not compatible with one of them, in case it changed. I did a quick search on the error message you're getting, and I found this forum in which they give some steps you could follow regarding the INF file. For instance, in one of the comments, they say they had a similar issue with another device and they found some work arounds.
Best Regards,
Alina M

I have an 8300 a3 printer driver for vista not working

Similar Messages

Maybe you are looking for