I have an additional LCD hooked to my iBook. How do I run two diff. apps?

Please help. Frustration level high.

Hehe, apple's usual giberish. I own a apple Ibook G4 14" unit. I found screen spanning doctor along my travels. It works fine along with the dvi output, using it on something older may pose problems if the video hardware was pretty old. But usually no prob, go for it, but don't enable clamshell mode when you install it if you have something 14" or higher as it poses heating problems and will ruin your lcd.

Similar Messages

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

I was geting an error message and now I have nothing on itunes. Does anyone know how I can recover my music, apps, and so on??, I was geting an error message and now I have nothing on itunes. Does anyone know how I can recover my music, apps, and so on??

I got a new Ipad today and I was using itunes to manage the content and sync the apps (I also have an ipod and an iphone) and I was getting an error message when using the search. All of a suden I was going to sync the ipad and I get the message saying that the library from itunes is empty!!!
I still have my apps in the ipad and the iphone, but nothing on itunes. Do you know how I can recover itunes?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

How can i run two firefox's so i can have both my face book acounts open at the same time without one logging in to the other

as you can see, im trying to have two firefox windows open so i can have both my facebook accounts open at the same time on the same pc
all i get just now is they both log in to there user but ass soon as the page refreshes one drops its user and logs into the other

Try of of these extensions for multiple cookie sessions.
Multifox: <br />
http://br.mozdev.org/multifox/ <br />
Cookie Swap extension: <br />
https://addons.mozilla.org/firefox/3255/ <br />
Cookie Pie extension: <br />
http://www.nektra.com/oss/firefox/extensions/cookiepie/

How do I run two sub-VIs in parallel and have the faster VI continue to execute while the slower one completes?

I have two sub-VI's - one that makes a laser distance measuring device turn on and return a distance, and another that moves a platform upon which a target is mounted that the laser reflects against. The laser VI takes well under 5 seconds to complet. The platform-moving VI, on the other hand, requires about 30 second. I would like to be able to have the laser on AS the platform moves. Of course, I can accomplish this by running the VIs seperately. However, I would like to control them from a master VI. Currently, the laser turns on as the platform begins to move but then turns off, since the master VI waits on the platform-moving VI to
complete. Any help with this seemingly simple dilemma would be greatly appreciated.

In order to synchronize the two VI's I would recommend using a global variable. By creating a global boolean, you can make reference to it in both programs, and control when your "laser" subVI terminates.
Basically, have your "laser" subVI wait until the global boolean goes true to stop execution. Have the boolean initialized false, and then have your "platform" subVI write a true to the global boolean when it has finished running. This will keep you laser running until the platform has completed its move. Good luck!

I have iphone 4s and I got wifi problem how i can fix it

I have iphone 4s and I got wifi problem how i can fix it

Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If still problem, Restore iPhone with iTunes 10.7 on computer. See if fixed. If still problem and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution.

I have a record player hooked up through the audio port. The input volume is registering high, but there is no output anywhere. Help?

I have a record player hooked up to a preamp which is hooked up through the audio port.The sound settings are set to have the audio port be "input". The input volume is registering high with fluxuations in the sound settings, but there is no output anywhere. Do I need some sort of third party application or widget to hear the record i'm playing through the speakers that are hooked up to my computer?

keithstopher,
You may want to check into a USB interface, as I believe you have a Mac with the single audio port, which can be used as input OR output.
You may want to check into something like the following, there are may out there, see what fits your needs best.
http://www.amazon.com/Behringer-UFO202-BEHRINGER-U-PHONO/dp/B002GHBYZ0/ref=pd_cp _MI_2
Hope this helps

I have my Macbook Air hooked up to a Tunderbolt Display, is there any way to either power on or wake from sleep mode using an Apple USB keyboard pluged into the Thunderbolt display?

I have my Macbook Air hooked up to a Thunderbolt Display, is there any way to power on the Macbook Air using an Apple USB keyboard plugged into the Thunderbolt display? I would like to be able to keep the Macbook Air in the Archbook dock and not have to open it to power it on?
Thanks for any advise.

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

HT201177 I have my macbook pro hooked up to my Samsung tv via HDIC. I have good video, but no audio. Can anyone help?

I have have my macbook pro hooked up to my Samsung tv via HDMI. I have great video but no audio from TV. Only what is coming out of my computer,
Never mind, I lreferenced some other posts with the solution. Thanks anyway!

Only MacBook Pro's from mid-2010 onwards support audio through the mini-DisplayPort. You will need to hook up a cable from the headphone socket to the TV.

I have my mac air hooked to the tv using thunderbolt and HDMI

I have my mac air hooked to the tv using thunderbolt and HDMI the background screen and screen saver are the only things that will appear, but no icon's and cursor what I'm i missing?

That's called the "extended desktop mode". Your screen is logically extended to the right (by default). Drag an application off the right side of your MBair screen and it'll appear on the TV.
You can also toggle between extended desktop and mirror mode by pressing CMD F1.
Visit all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred

My iMac (2007) keeps shutting off when in Full Screen mode (DVD, iTunes Visualizer, etc.) This only happens when I have an external monitor hooked up HDMI.

My iMac (2007) keeps shutting off when in Full Screen mode (DVD, iTunes Visualizer, etc.) This only happens when I have an external monitor hooked up HDMI. Help?

Try using another connection such as VGA or DVI to see if the problem repeats itself.

I only have one computer assigned to our ID and am trying to authorize my other computer for home share but it keeps telling me to deauthorize other computers. we do not have any other computers hooked up to the account. how do i get past this?

i only have one computer assigned to our ID and am trying to authorize my other computer for home share but it keeps telling me to deauthorize other computers. we do not have any other computers hooked up to the account. how do i get past this?

Understanding Home Sharing
Troubleshooting Home Sharing

HT201318 i have purchased additional storage on incloud and cannot back up. can anyone tell me why?

I have purchased additional storage from icloud and cannot backup. Can anyone tell me why I cant backup?

Not being able to back up to iCloud can be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

TS3992 I have purchased additional icloud storage and now when I try to back up it says. "Last Backup not successful" No reason or additional information.

I have purchased additional icloud storage and now when I try to back up it says. "Last Backup not successful" No reason or additional information.

Welcome to the Apple Community.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

I have an additional LCD hooked to my iBook. How do I run two diff. apps?

Similar Messages

Maybe you are looking for