I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.
I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.
The utility has had less and less useful information .. it might be time to simply find a different utility.
Fing network scanner. iphone and ipad.
https://itunes.apple.com/au/app/fing-network-scanner/id430921107?mt=8
This is very popular.. I do not know of what works well on Mac OS because i have installed 5.6 utility which of course has far more info than the later toy version. Plus using an Asus router which has excellent listing of all the clients.
Sometimes beating yourself up to make apple routers do what you want is easier solved with lateral thinking.
Similar Messages
-
Why does reader freeze while opening some pdf files and others open instantaneously?
I use pdf files created from CamScanner and shared from DropBox. In DropBox, many times (over 50%) while opening the PDF the process freezes and the error message is Adobe Reader is not responding. If you close the program, and re-open the file, it opens fine. I have saved these files to my computer and the same issue occurs. The files are 100-500kb, so I do not think size is the issue. I have reinstalled Reader (11.1.10) and there is no improvement.
This appears to have reduced the time to load a document. Thanks Jimb From: Anubha Goel <[email protected]>
To: jimb70395944 <[email protected]>
Sent: Friday, March 20, 2015 4:37 AM
Subject: You have been mentioned by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community
|
You have been mentioned
by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community - View Anubha Goel's reference to you Hey jimb70395944, Please try disabling protected mode under 'Edit> Preferences> Security (Enhanced)' and uncheck 'Enable Enhanced Security' option.Then, try again and let me know. Regards,Anubha
Participate in the conversation by replying to this email
To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. | -
I keep getting a pop up reminder to install Java SE 6. When I attempt to install it an error occurs saying that there is a internet connection problem and the Java cannot be intalled. This thing pops up every 15 minutes. Am I doing something wrong? Thanks for any help
OK, so you don't have a working iTunes.
What I would like to do now is to try installing each iTunes component separately.
First uninstall the 5 iTunes programs that you have installed.
You should have iTunesSetup.exe saved in a folder on your PC, probably in the downloads folder. If not download and save it now.
Open the folder containing iTunessetup.exe with explorer.
Next open notepad and copy the following 3 lines into it.
md temp
itunessetup /extract temp
pause
Save the file as extract.bat into the same folder that contains the itunes installer.
Open the downloads folder and you should find the extract file that you saved. Double click on it and a black window will open telling you what it is doing. When its finished, press any key to continue.
You should find that a folder called temp has been created containing all the itunes msi files.
Install in this order by double clicking on them:
Apple Application Support
Bonjour
Apple Mobile Device Support
Apple Software Update
Quicktime
iTunes
If one of the installs fails, stop and post the error message in full. I am hoping that by doing this separately we will get a better error message. -
Why does my quicktime player version 10.2 sometimes read AVI video and other times it will not recognize that same file. I have a video card that sometimes it will read then the next time it recognizes the card but will not open the video. Message says "quicktime does not recognize this file.
Whats up with that ??? Any help will be most appreciated!AVI is a container just like MKV, WMV, MOV, and MPEG. It is possible to use many different compression formats aka. codecs in an AVI container.
Think of the container - AVI as being an envelope, and the compressed video in it as a letter. The letter may be in a language you cannot read even though you know how to open the envelope.
Historically QuickTime did have some built-in ability to use AVI files and some formats in those files, this used to be further improved by installing the free Perian (for Mac only). However with Mavericks Apple have removed the ability for QuickTime X aka. QuickTime Player 10 to use AVI files, it now really only accepts MPEG4 or H.264.
It is still possible to install QuickTime 7.6.6 in Mavericks and if you use it and Perian rather than QuickTime X you can still use various AVI files.
Note: Mavericks also now no longer shows previews or thumbnails for AVI files for the same reason. -
Why can I sometimes paste text into a revision history dialog box and other times cannot?
Why can I sometimes paste copied text (from another VI's revision history, for instance or from anywhere else) into a revision history dialog box and other times cannot? All versions of LabVIEW! It's something like the control key becomes diabled. I've noticed the same thing when saving many VI's at once, some will let you paste into revision history and others will not. Aren't all VI's created equally when it comes to revision history? All versions of LabVIEW since 3 have plagued me with this problem.
Hello,
If you'd like to add text to the revision history of a VI, you can
paste into the Comment box and add all of your text at once. The
history itself can be read from this window, but cannot be directly
edited. The History field is read-only in the dialog box.
If you feel this should not be the case, your best course of action is
to express your desire for added functionality to our developers on the Product Feedback page of our website.
Message Edited by MattP on 12-19-2006 12:04 PM
Cheers,
Matt Pollock
National Instruments -
I have a work website the I sign into and check my schedule, etc. Sometimes it opens and other times not., it uses webConnect to open.
Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon! -
Why does my airport extreme not recognize my cable modem anymore?
Why does my airport extreme not recognize my cable modem anymore?
Have you tried resetting the modem? Power it down and let it rest a moment, then power it back up again.
Also, some ISPs require physically detaching their cable from the modem for it to be fully reset. Literally unscrew it from the modem. Try that, in conjunction with powering it down.
Don't do anything with your Extreme, other than powering it down too, in the event the modem reset does not help. Reconfiguring it may be necessary but this is not justified quite yet. -
I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?
Depends which iMac exactly and your network setup, you can go into System Preferences and under the Sharing pane you can enable internet sharing from ethernet (or whereever you get your internet from) to Wi-Fi.
-
I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express. -
I connected an airport extreme (2013) to an existing pc network
I connected an airport extreme (2013) to an existing pc network and I had to change all my ip addresses. I managed to catch on to the apple replacement range and reset all my printers' addresses manually. Was there an easier way to handle this? Also, I lost the connection to my WD Worldbook drive though and haven't been able to come up with a work around. Any ideas would help, thanks!
First, to answer your question about the WD drive - I could not find it with an ethernet connection. I tried connecting to the usb port on the Extreme, but it was not visible there either.
When connecting an external network drive to the AirPort Extreme by Ethernet, the drive would be providing the file sharing service. This would be typical of a Network Attached Storage (NAS) device. If your WD Worldbook offers NAS services then it should be found by network clients per WD's instructions.
When connected to the Extreme's USB port, the Extreme would take over the file server services. However, the drive must not be formatted in either NTFS or ExFAT as either are not recognizable by the Extreme for sharing out. My guess is this is the case and why the AirPort Utility cannot "find" the drive.
If your WD Worldbook has an Ethernet interface that is the one you should use for best performance. It is still possible that this drive is using an IP address that is not in the default range of the Extreme.
How can I reset the IP range on the router. I have to use the iPad app to manage the router and I didn't see any way to change the range. Did I miss something or would I need to use an Mac computer to get more options?
You can change the IP address range of your AirPort using the AirPort Utility on your iPad.
To change the range:
Run the AirPort Utility.
Select the AirPort Extreme, and then, select Edit.
Select Advanced.
Select DHCP Range.
Select 192.168 -
My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?
Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems. -
Why does my airport express keep cutting out?
Why does my airport express keep cutting out?
I have a 1st gen Airport Express and use it to stream music from my PC, iPhone 4, iPad and iPod Touch. My Airport Express is connected to a Teac UD-H01 DAC via an optical cable which is connected to an amp and speakers. I had no problems at all with this set up until I upgraded the Airport Express firmware to 7.6.3. The sound then started to drop out frequently. To cut a long story short after various testing, the problem had to be the Airport Express. I called Apple support but they were not much help and couldn't fix the problem and said they would speak to engineering and phone back. While I was waiting I decided to have another go to find the problem and opened the airport utility and saw that there was an option to downgrade the firmware. At this point I realised that the problems started about the same time that I upgraded the firmware to 7.6.3 but didn't think at the time that Apple would release a firmware that didn't work. Anyway I downgraded to 7.6.1 and hey presto, everything worked again. A couple of days ago I noticed that firmware 7.6.4 was available and thought I'd give it a go, not good - same problem as 7.6.3. I've downgraded to 7.6.1 again and all is well. Hope this helps.
-
Why does my airport utility always ask me to connect an ethernet cable when I would like to use the extended network option?
Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device. -
Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...
Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests. -
my airport extreme is flashing amber it says i need a ip address .... it was working just fine yesterday until i had to reboot cable modem how do i get my extreme to work again so i can have wireless..... please help!!!
Hi again Jen,
Most internet providers utilize "dhcp" -- you might want to check to see if your extreme is set to that function.
If you want to try, you need to go into airport utility and select MANUAL setup/ then click NETWORK button on top of the window. /select TCP/IP -- make sure that you see "Using DHCP" not MANUAL in the configuration window. If you do see using dhcp, click the renew dhcp lease button. Then you'd have to do the power down/up cycle again. If all this doesn't work, you can do a hard reset on your Extreme, which will bring it back to the way it came out of the box, then go through the same proccess that was used to set it up originally.
Maybe you are looking for
-
Hi can anybody help me please my grand daughter had changed the pass code on my ipod touch and now forgotten it is there anyway i could bring it back to the begining like when i first got it. I cant access anything and i cant sync it to itunes either
-
System and security control panel
Could someone with a W520 take a screenshot of the lenovo apps in their "system and security" section of control panel please. I am doing a ground up install from bare windows 7 to get rid of the preloaded SQL server 2005 and adding back the programe
-
My ipad was stolen this morning; can Verizon track the location of the device an assist the police department in recovering the device? I am filing a police report does Verizon have the serial number of the device for me to include in the police repo
-
Write Back implementation in OBIEE 11G
Hi, i have created new table for implemetation of write back using obiee 11g. i have finished confirutation for that.but i am getting " THE SYSTEM NOT ABLE TO READ THE WRITE BACK TEMPLATE.PLEASE contact your system administrator. Could you please cle
-
Hi, has anyone used R/3 class hierarchy in BW reports? I would like to use classification system in R/3 to build up class hierarchies both for material and customers and use those in BW reports. At this point of time I would only be using classes wit