I have an app that only works on IE7 is there a firefox version equivalent to IE&7?

My LTS 2808me DVR's only work on IE7, and I can no longer down garde that far to IE7 on my windows laptop. I was told that firefox has a version equilent to IE7 , how do I download it?

If that application is using proprietary IE (MS) code then it will only work in IE and not in Firefox.
You can install a portable (ESR) Firefox version to access websites that do not work with the current Firefox release.
The portable version comes with its own profile folder and doesn't interfere with the currently installed release version.
*http://portableapps.com/apps/internet/firefox_portable
*http://portableapps.com/apps/internet/firefox_portable-esr

Similar Messages

Is it possible to have an app that only opens up a pdf? Where does the ...

app place the pdf when it is compiled?
Assuming the pdf is contained in the application folder when the app is then compiled? Is the pdf contained in the app, or does it get installed somewhere?

jtbullet wrote:
app place the pdf when it is compiled?
Assuming the pdf is contained in the application folder when the app is then compiled? Is the pdf contained in the app, or does it get installed somewhere?
Sure, you can create an app that only opens up a PDF. The usual place for that kind of stuff is in the application's bundle, which Xcode will do if you add the PDF to your project.
charlie

TS1702 When I backed up my ipad because I thought I had a problem with it in which I didnt, I went to restore my ipad and now some of my app that I had purchased are not there, the free version is on my Ipad and Icloud but not the purchased version?

I thought I had a problem with my Ipad in which I didnt, so I backed up my Ipad and restored it, but now Some of my apps that I have purchased are not available only the free version, not the purchased version. I would have to purchase again and it is not backed up into my Icloud either ?

I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
Copied from the article that linked you to this discussion ....
Resolution
Update your device to the latest version of iOS to be able to restore the backup.

How to run a app that only works in 10.4

My version of Vectorworks only runs in 10.4
I want to upgrade my Mac to 10.6
I do not want to reboot into a 10.4 hard drive to just run Vectorworks.
I want a solution that would run 10.4 simultaneously like Classic was when OSX first came out.
Any ideas?

Sorry, that is not possible.
Allan

I have two apps that won't download just sitting there

MMy grand daughter was trying to download two apps at the same time. She can't remember what they were. They are just sitting there in a grey colour. I can't get rid of them either I have an ipad2 I shut my iPad off last night & turned it on this morning they are still there.

You can also try to delete the apps. Try holding down on the icons until they wiggle and if the X appears on the app icon, tap on it to delete the app. Tap the home button when you are done. If that doesn't work, try deleting them in Settings>General>Usage>Storage>Manage Storage. Find the app, tap on it and tap Delete App in the next screen.

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
It works fine through my macbook, can't find anything in settings on iphone to resolve problem

The headset has to have A2DP capability, which most (I believe) do not.
http://en.wikipedia.org/wiki/Bluetooth_profile

I have many apps that that do not work, i have ios 7....is resseting iphone tottaly will help ?, I have many apps that that do not work, i have ios 7....is resseting iphone tottaly will help ?

I have many apps that that do not work, about more than 50% of what idownload from appstore will not even open, i have ios 7....is resseting iphone totaly will help ? thanx

YOU CAN'T.
If you upgrade your phone you can only upgrade to iOS 7 and that is it. You can only ever update to the lastest available software, which in this case is iOS 7. You either upgrade to this or not at all because you can't upgrade to anything else.

I have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

i have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

Sounds like you actually have a 1st generation as those cannot update beyond iOS 3.1.3.
Model Identifier Utility
rachelfromnorthumberland wrote:
what apps can i get??
Finding iOS Apps Compatible with Older Devices

I have ipod gen 2 8gb. WHere do I find apps that will work?

Gen2 8gb ipod touch. Is there a way to search for apps that will work on that? I know it is older. Most of the apps I find will no longer work on under iOs 3.0. Looking specifically for apps for calorie counter & book on tape.
thx

No, all you can do is look a at an app that internest yuo and see if it is compatible with your iPod.
BTW, a 2G iPod can go to iOS 4.2.1
To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
Identifying iPod models

I own a HP Envy100 eAll-in-One d4100 and the only App that will work is Snapfish,

I own a HP Envy100 eAll-in-One d4100 and the only App that will work is Snapfish?

All others show a connection error - Touchsmart is not responding.

I own Flash CS5 now running CCP. Have to update a site I did in Flash CS5 that uses an extension that only works in CS5..Need downlad to install again.

I own Flash CS5 now running CCP. Have a site I did in Flash CS5 that uses an extension that only works in CS5 have to update site.....Need download to install again. I only have an upgrade disk and it is looking for older version I do not have installed anymore. Just need a .dmg of flash cs5 and a serial number if it is different from the upgrade disk

Download CS5 products
Mylenium

I have 51 apps that were indicated need for updating. Clicked update all and now there is only a very slow progression thru the apps. Why so slow? Should apps be updated one at a time?

I have 51 apps that needed updating. I clicked update all and then they began to very slowly update. Very slow. Is this usual? Should I update one app at a time and do I really need to do all this updating all the time? It's time consuming or am I doing something wrong?

51 apps is a lot, it could take time. It also depends on the local network and how busy it is. Many users have complained today that they can access contacts, calendars, and/or email - maybe there are server problems right now (and today is the big Apple announcements, so things may be in flux).
When I have a lot of apps to update, I do it using iTunes on my mac.

I have an app that I want to be 100% in the browser

I have an app that I want to be 100% in the browser and I give
<mx:Application
     width="100%" height="100%"
However when I go to the browser it only expands to the width of the largest image in the App. I used firebug to see the size of the swf object in the firefox browser and its was at 100% but the visual app didn't change size.
Any ideas?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<script type="text/javascript" src="../../app_functions/swfobject/swfobject.js"></script>
<script type="text/javascript">
            var flashvars = {};
            var params = {};
            params.allowfullscreen = "true";
            params.wmode = "transparent";
            var attributes = {};
            attributes.id = "flexApp";
            swfobject.embedSWF("debug/main.swf", "myAlternativeContent", "100%", "100%", "9.0.0", false, flashvars, params, attributes);
        </script>
<style type="text/css">
/*#center{
    float:left;
    text-align:center;
    margin:0px auto;
body{
text-align:center;
html, body, div {
height: 100%;
width:: 100%;
</style>
</head>
<body>

<div>
<div id="myAlternativeContent"> <a href="http://www.adobe.com/go/getflashplayer"> <img src="https://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /> </a> </div>
</div>
</body>
</html>

If you want the myApp.swf to be the full browser window, you want the object and embed tags to have height=100% width=100%. The only tags inside the body tag.
These are set in the
AC_FL_RunContent(
If you're using that.
I don't know what you guys are getting for a default template but this works in all browsers for me. You can go this page and stretch it every which way. Read the page source and use it.
http://meshgraphics.com/flexes/myApp/bin-debug/myApp.html

I have many apps that say they are downloading but have stoped

Since the OS7 ipdate I have many apps that have stoped working because they are "updating". This has been like this for 5 6 days now. I have looked at the App Store under purchased and none of my apps say update. When I try to open a darkened app from this page it locked up my mini. Will I have to do a reset????

If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

I have 2 apps that have been waiting to update for a week. I don't really care about the update, I would just like to use them, but the are stuck waiting. I have tried powering down, syncing with my computer...all fails. Any ideas?

I have 2 apps that have been waiting to update for a week. I don't really care about the update, I would just like to use them, but the are stuck waiting. I have tried powering down, syncing with my computer...all fails. Any ideas?

At this point you have no choice but to update the or delete them and reinstall them since you wont be able to use them until they update - or come out of the "waiting" loop.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

I have an app that only works on IE7 is there a firefox version equivalent to IE&7?

Similar Messages

Maybe you are looking for