I have an Apple Cin HD Display 23" monitor, purchased in 2006. I use it with a old PC (2007) running Win XP. Works fine. Can this monitor be used with a new PC with Intel 4th gen i5 processor, running Win 8.1?
I have an Apple Cin HD Display 23" monitor (part no. M9178LL/A), purchased in 2006. I use it with an old PC (2007) running Windows XP. Works fine. Can this monitor be used with a new PC with Intel 4th gen i5 or i7 processor, running Win 8.1?
I have an Apple Cin HD Display 23" monitor (part no. M9178LL/A), purchased in 2006. I use it with an old PC (2007) running Windows XP. Works fine. Can this monitor be used with a new PC with Intel 4th gen i5 or i7 processor, running Win 8.1?
Similar Messages
-
Camera connection kit for ipad 2. Can this kit be used with ipad air and if so what adapter(s) are required please
You can try the 30 pin to lightning adapter but I'm not sure if that'll work. So if you get it to experiment, make sure you can return it. Apple does sell a SD to lightning adapter for the newer devices. So that should be a sure bet. The main downside is that your 30 pin camera kit came with both USB and SD for 29 and now the USB adapter is 19 and the SD adapter 29, so more expensive.
You may want to look into third party adapters, but make sure you use a reputable manufacturer (ie not a cheap no-name off amazon) because iOS7 brought with it software that looks for a signed chip in the adapter. And a chip is 'signed' when a company gets apple's permission to make accessories. I would suggest sticking with companies like Belkin, Kensington and Targus. They seem to be of a better reputation when making things and would have a signed chip. -
My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?
What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two. -
I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please
Hi there soulboycraney,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
-Griff W. -
I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that I am not authorised to do anything on the account in relation to the transaction. What should I do?
You can view and edit your orders without an Apple ID by logging in with your order number, along with the shipping zip code or email address.
I copied the text posted above from this website.
http://store.apple.com/us/help/viewing_changing_orders
Click or tap on the Order Status link here and you should be able to type in the order number and your zip code.
To view or edit your Apple Online Store order, visit online Order Status and log in with your Apple ID and password. -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
I have an older IMAC mid 2007 intel core. I want to transfer my backup files from an older Maxtor One Touch drive to a new one. My old drive is not support by Yosemite. Can I transfer the files to a new supported drive? I haven't bought a new one yet. Any suggestions as to which new one to purchase?
See if you can get the drive to mount. See mount section of 1st link.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk -
I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more
Any solution ?
I'm using iOS 6.1.2 IPad 3
RegardsI have also noticed the same "problem". I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.
-
I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?
Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?
try rebooting your computer.
-
i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?
Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.
-
Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?
Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule -
After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any advice?
I have the same problem. Running Win 8 64Bit, updated to latest ITunes and now will not recognize phone or pad. Followed all advice from Apple (uninstall/restart/re-install, all in exact order) ... nothing. Spoke with Apple tech and walked through the whole process, but no resolution. Tech was trying to be helpful but has no way of addressing issue.
-
For what can i trade in my cracked but still fully functional iPod 4th Gen for?
For what can i trade in my cracked but still fully functional iPod 4th Gen for?
Apple will give you a 10% discount when purchasing a new one.
-
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin
Maybe you are looking for
-
LVS Viewer: Cannot display the report
Dear All, When I query the report in LVS Viewer, I didn't see any error message. The system said loading....then no report shows. Does it mean I am missing some software on terminal server? I installed LVS server on our DB server. I installer LVS cli
-
I am trying to calculate and return the age of a person. My code is: <cfset variable.age = '(dateDiff("yyyy",query.birthdate, now()))'> I get a "If the expression is a string, ensure that it is within quotes. Error: report.ModStat(query.soc_sec)
-
IMac won't turn on. Only a clicking sound and a grey folder with flashing question mark.
iMac won't turn on. Only a clicking sound and a grey folder with flashing question mark. Help.
-
Help with realization of a code by "change" event
The form is developed in Live Cycle 9 There is the following code: var str = rawValue; var FIO = str.split (' '); var a = FIO.length switch (a) { case 2:{ FIO [0] = FIO [0].charAt (0).toUpperCase () + FIO [0].substr (1); FIO [1] = FIO
-
Assigned resourse but no linked account. How to recover?
Hellos. I/we are in a difficult situation. We have a User who gets an AD resource (actually a specific account type) assigned by a Role. Well, AD admin renamed the DN of the AD account linked to our User and all ActiveSync based updates were failing.