I have an apple ipod model A1136 that does not respond

My apple A1136 just flat stopped when listenting to music. I can barely see the song that was playing and the battery is at half charge. I can not turn it on. Diagnostic says it is not connected. Done everything in book with no success. HELP

My apple A1136
A1136 Appears to be the apple iPod classic, please post in the iPod forum here

Similar Messages

  • I have areas of my iPad screen that does not respond to touch. Is that normal? The area is random and not always the same location.  How can I fix?

    I have areas of my iPad screen that does not respond to touch. Is that normal?  The areas are random and not always in the same place.  Is there anything I can do to fix this problem?

    Have you tried rebooting it by holding the home and on button until the Apple logo appears?

  • I have a strip on the touchpad that does not respond when I touch it.  Is there anything I can do?

    I have a strip from top of the pad to the bottom where it does not respond to touch.  It makes it difficult to type or draw on my iPad.  Is there anything I can do?

    You can try this - it will not hurt - not sure if it will help.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

    I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

    I do not know wat "reeked to reset" means.
    Try the following:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then on your router.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • I have an apple TV Model A1427 and do not have an icon for youtube. How can I add youtube to the home page?

    I have an apple TV Model A1427 and do not have an icon for youtube. How can I add youtube to the home page?

    Have icon but cannot connect - Please Help.
    Mine is Gen. 2 - Model MC572C/A. I have the YouTube icon but cannot access YouTube.  Message says "No content was found - There is a problem communicating with YouTube. Try again later."  This problem has been for at least 1 month now.  Any ideas?

  • Need to disable an ipod touch 5 that does not have icloud what can i do ?

    need to disable an ipod touch 5 that does not have icloud

    There is no way to do so if you did not set it up in advance. If it was stolen or lost report it to your local autorities.

  • TS1702 I have a charge on my CC that does not track to any purchases nor do I have an email receipt.  Can anyone tell me where/how I can get this deleted (charge is from 04/08 so nearly two weeks old)?  Thanks!

    I have a charge on my CC that does not track to any purchases nor do I have an email receipt.  Can anyone tell me where/how I can get this deleted (charge is from 04/08 so nearly two weeks old)?  Thanks!

    Apple could not tell you who else might be using your credit card, so there's no point in trying to contact them. All they could discuss with you is your own iTunes Store account, and if there's nothing in your purchase history, the charges almost certainly aren't coming from there. Again, you should take this up with your bank/credit card company and report these charges as fraudulent. They probably will cancel your card and issue you a new one.
    Regards.

  • Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

    Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • Since I have Yosemite on my iMac I can't view PDF files in Safari anymore.  It keeps telling me to upgrade my Adobe Reader, but it is the latest version.  Please help?  I don't have this problem on my Macbook that does not have Yosemite installed.

    Since I have Yosemite on my iMac I can't view PDF files in Safari anymore.  It keeps telling me to upgrade my Adobe Reader, but it is the latest version.  Please help?  I don't have this problem on my Macbook that does not have Yosemite installed.

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and check the box marked
              Allow Plug-ins
    Then click
              Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
              Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • I have an 2007 mac book pro that does not have a place for HDMI cable.  Can you please tell which converter I need?

    I have an 2007 mac book pro that does not have a place for HDMI cable.  Can you please tell which converter I need?

    You will need something such as this:
    http://www.amazon.com/A-Sonic-HDMI-HD15-Male-Cable/dp/B001OLCHJ6
    Ciao.
    Note that this will only transmit video.  If you need sound, the audio output port will have to be tapped.
    Message was edited by: OGELTHORPE

  • Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  See if that clears the glitch.

  • The home button for my ipod touch 4th generation does not respond all the time, What do I do?

    The home button for my ipod touch 4th generation does not respond all the time, What do I do?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I have a new HP Photosmart Premium that does not connect to our ATT router we use for 2

    We just purchased a new HP Photosmart Premium to work on our ATT wireless router with two laptops.  It does not connect to our ATT wireless network with the error "No filtering"  FAIL indications.  Why?

    There could be several reasons for this.
    Let's try this: cycle power on the router, let it restart a couple of minutes then try it again.
    If that does not work, we may need to adjust some settings in the router.   ISP supplied routers are not the best.....
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My iPod touch 5th gen does not respond properly when charging?

    Having real issues with my iPod touch 5th gen touchscreen not responding when it's on charge. Parts of the screen go dead or need several taps etc. Tried removing case etc. made sure I'm using included charger and directly to the mains not on an extension. Is it faulty?

    Some other users have reported same problem. I have not heard of a resolution. You can try:
    - Using another cable
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • I have an issue with Finder. It does not respond

    Finder does not respond if I click on the icon. I have to open Finder via a right mouse click and clicking 'Open New Finder window'

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Maybe you are looking for